User Manual www.whirlpool.
USER MANUAL THANK YOU FOR BUYING A WHILPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on www.whirlpool.eu/register INDEX HEALTH & SAFETY GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Health & Safety guide EN SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls.
Health & Safety guide DISPOSAL OF PACKAGING MATERIALS Use only new hoses to connect the appliance to packaging material is 100% recyclable and is marked with the recycle the water supply. The old hose-sets should not be The symbol . The various parts of the packaging must therefore be disposed of reused. and in full compliance with local authority regulations The supply water pressure must be in the responsibly governing waste disposal. 01-1 Mpa range.
EN User manual PRODUCT DESCRIPTION 1. 2. 3. 1. Lid handle 2. Lid 4. 3. Control panel 5. 4. Detergent dispenser 5. Drum 6. Water filter - behind the cover 6. 7. 7. Mobility lever (depending on model) 8. Adjustable feet (x2) 8. DETERGENT DISPENSER 1. Main wash compartment • Detergent for the main wash phase (must be added for all wash programmes) • Additive for stain removal (optional) • Water softener (optional; recommendable for water hardness class 4 or more) 2.
User manual CONTROL PANEL 9 8 7 1 2 3 4 5 6 1 Programme selector 2 “Start/Pause“ button 3 “Reset/Drain“ button 4 “Start delay“ button 5 “Favourite“ button 6 Child lock combination 7 “Spin“ button 8 Time 9 Washing phase PROGRAMMES For choosing the appropriate programme for your kind of laundry, always respect the instructions on the care labels of the laundry. The value given in the tub symbol is the maximum temperature possible for washing the garment.
EN User manual OPTIONS ! When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. ! Unsuitable combinations of options are deselected automatically. COLOURS 15° Saves energy used for water heating while maintaining a good wash result. Supports colour maintenance when washing coloured laundry. Recommendable for lightly soiled laundry without stains. Make sure that your detergent is suitable for cold wash temperatures.
User manual PROGRAMME CHART Cotton Total water lt Mixed Energy consumption kWh Programme Temperatures 3.0 ** – – – – 7.0 240 – 62 0.90 48 3.5 170 – 62 0.75 34 1200 3.5 150 – 62 0.65 34 Max. Max Spin speed load (kg) (rpm) Default Range 40°C 40°C 1200 60°C 1200 40°C 60°C Recommended detergent Residual dampness % * Max load 7.0 Kg Power consumption in off-mode 0.11 W / in left-on mode 0.
User manual EN HOW TO USE THE APPLIANCE FIRST TIME USE Remove any manufacturing debris: • Select the “Synthetics“ programme at a temperature of 60°C. • Pour a small quantity of detergent powder into the main wash compartment of the detergent dispenser (maximum 1/3 of the quantity the detergent manufacturer recommends for lightly soiled laundry). • Start the programme without adding any laundry (with empty drum). • See section “DAILY USE“ for more information on how to select and start a programme.
User manual 3. Add detergent ! Do not use liquid detergent for the main wash when having activated the “Prewash“ option. ! Do not use liquid detergent when selecting a later cycle start. Add detergent (and additives/softener) into the relative compartments as described in section “DETERGENT DISPENSER“. Observe the dosing recommendations on the detergent pack.
EN User manual 11. Programme End • At the end of the cycle, the message is shown on the display. • The door can only be opened when the “Lid open“ indicator light turns on. • Turn the programme selector to the “O“ position and close the water tap. • Open the lid and drum and unload the machine. • Leave the lid open for some time to allow the interior of the machine to dry. After about a quarter of an hour, the washing machine will switch off completely to save energy.
User manual CLEANING & MAINTENANCE For any cleaning and maintenance, switch off and unplug the washing machine. Do not use flammable fluids to clean the washing machine. CLEANING THE EXTERIOR AND INTERIOR OF THE WASHING MACHINE Exterior: • Use a soft damp cloth to clean the outer parts of the washing machine. • Do not use glass or general purpose cleaners, scouring powder or similar to clean the control panel – these substances might damage the printing.
EN User manual CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE 1. Close water tap and unscrew the inlet hose. 1 3. Now unscrew the inlet hose on the back of the washing machine by hand. Pull out the mesh filter from the valve on the back of the washing machine with pliers and carefully clean it. 2 2. Clean the mesh filter at the hose’s end carefully with a fine brush. 4. Insert the mesh filter again. Connect the inlet hose to water tap and washing machine again.
User manual CLEANING THE WATER FILTER / DRAINING RESIDUAL WATER Switch off and unplug the washing machine before cleaning the water filter or draining residual water. If you used a hot wash programme, wait until the water has cooled down before draining any water. Clean the water filter regularly, to avoid that the water cannot drain after the wash due to obstruction of the filter. Especially: • if the appliance is not draining properly or if it fails to perform spin cycles.
EN User manual RECOVERING AN OBJECT THAT FALLS BETWEEN THE DRUMAND THE TUB If an object accidentally falls between the drum and the tub, you can recover it thanks to one of the removable drum blades: 1. Unplug the washing machine and remove the laundry from the drum. 2. Close the drum flaps and turn the drum a half-turn. 3. Using a screw-driver, press on the plastic end while sliding the blade from left to right. It will fall into the drum. 4.
User manual TROUBLESHOOTING Your washing machine is equipped with various automatic safety and feedback functions. They enable failures and needed maintenance to be detected and indicated accordingly. These failures are frequently so minor that they can be removed within a few minutes.
EN User manual DESCRIPTION OF FAILURE INDICATORS Failure indicator Indication on lights up: display “bdd“ Possible causes / Solution “Drum flaps open“ Appliance stops during the programme. The drum flaps have not been closed properly. Push the “Reset/Drain“ button for at least 3 seconds and wait until the “Door open“ lights up. Open lid and close drum flaps, then select and start desired programme again. If fault persists, notify our After-Sales Service. from “F02“ to “F35“ “Electrical module fault“.
User manual TRANSPORT AND HANDLING Never lift the washing machine by holding it at the lid or panel. 1. Pull out the mains plug, and close the water tap. 2. Make sure that the drum and lid are properly closed. 3. Disconnect the inlet hose from the water tap, and remove the drain hose from your draining point. Remove all rest water from the hoses, and fix them so that they cannot get damaged during transport. 4. Fix the transport bracket again for transportation. (see “Installation guide“ last step) 5.
Installation guide 1 17 mm - 0,67 inch 1a 1b 8 mm - 0,31 inch x2 2 x1 2c 2a i 3 4 2e 2d 2b 3a i 3b max 2,0 cm max 0,8 inch 5 19
Installation guide 6 B / 8,2 f eet A , max 2 5m max 100 cm/ 39 inch min 55 cm/ 22 inch max 100 cm/39 inch min 55 cm/22 inch 7A a b d e i c 1 2 1b 1a 1 1c 2 2b 2a 859991581320 20