UseAndCare A Note To You 2 Important Safety Instructions 3 Parts And Features 4 Using Your Dishwasher 5 Loading Your Dishwasher 19 Caring For Your Dishwasher 23 Comnlon Dishwashing Problems 24 If You Need Assistance Or Service 27 Warranty 32 1-800-253-1301 Call us with questions or comments.
A Note To You Thank you for buying a Whirlpool • appliance. You have purchased a quality, world-class home appliance. Years of engineering experience have gone into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have developed this Use and Care Guide. It is full of valuable information on how to operate and maintain your appliance properly and safely. Please read it carefully.
Important Safety Instructions To reduce the risk of fire, electrical shock, or injury when using your dishwasher, follow basic precautions including the following: • Read all instructions before using the dishwasher. • Use your dishwasher only for the uses described in this manual. • DISHWASHER MUST BE ELECTRICALLY GROUNDED. Read the Installation Instructions for details. • When discarding an old dishwasher, always remove the door to prevent accidental entrapment or suffocation.
Parts And Features This section contains captioned illustrationsof your appliance. Use them to become familiar with the location and appearance of all pads and features. NOTE: The drawings in this book may vary from your dishwasher model. They are designed to show the different features of all models covered by this book. Your model may not include all features.
Control panel Signal lights Using Your Dishwasher In This Section Page Using your dishwasher for the first time ..................................................... 5 Before starting your dishwasher ...... 6 Starting your dishwasher .................. 6 Starting your dishwasher using delay wash .......................................... 6 Using cycle pause .............................. 7 Page Tfe WATER HEATING signal light ..10 Tf e CLEAN signal light ....................
Before starting your dishwasher 1. Properly load the top rack, hottom rack, silverware basket, and the cutlery basket. See pages 19-22. 4. Checkthe dnse agent dispenser. See pages 15 and 16. 2. Spin both spray arms with both racks in place to make sure nothing prevents arms from fuming freely. 5. Push door firmly when closing and it will automatically latch. Avoid touching control pads while door is open or being closed. 3. Add detergent. See pages 14 and 15. Starting your _\ | 6.
2. Select a new cycle and option(s), if desired. SELECT 3. Press the DELAY pad again to select a 2 hour delay. The 2 HOURS signal light will come on. Pressing the DELAY pad repeatedly will select (in order) 4 hours, 6 hours, no delay, then 2 hours, etc. If no delay is selected, all delay signal lights will be off. PRESS 4. After 2 hours, the signal light will turn off and the dishwasher will start.
Changing a cycle setting You can change a setting anytime during any cycle. During the first minute of a cycle During the first minute of a cycle the dishwasher is filling with water and the wash action has not started. 1. Select a new cycle and option(s). 2. Be sure the detergent dispensers are filled properly for the new cycle. After cycle: the first minute of SELECT a 1. Press the CANCEL/DRAIN pad. The dishwasher will go into a 2 minute drain cycle, if needed. PRESS 2.
The CANCELIDRAIN pad The CANCEL/DRAIN pad allows you to cancel a cycle, to clear the signal lights or to make a new selection. • Press CANCEL/DRAIN while the dishwasher is washing to start a 2 minute drain. (If the dishwasher has not been started or is not washing, it will clear the display.) • Press CANCEL!DRAIN drain. Control again to stop the panel lock-out • Press CANCEL!DRAIN again to start a 2 minute drain, if there is stilt water in the dishwasher.
The WATER HEATING signal light The WATER HEATING signal light comes on during the water heating portion of the Pots & Pans cycle. The signal light will also come on during the water heating portion of other cycles when the Hi-Temp option is selected. The WATER HEATING signal light will flash at the end of the cycle if the water did not heat to 135°F (57°C). If you want to make sure the water gets heated to 135°F (57°C), use the Hi-Temp option (see page 13).
i Flashing signal lights The signal lights will flash rapidly in order when your dishwasher is first installed and connected to electricity, The signal lights will also flash following a power failure. Press the CANCEIJDRAIN pad twice to clear the signal lights. Cycle selection PRESS TWICE chart A _," shows what steps are in each cycle Cycle Pots & Pans A double wash for maximum cleaning of cooked-on or baked-on foods.
A "-"shows what steps are in each cycle Cycle "rime Main Wash Rinse Wash Rinse Rinse Dry (Minutes) Cycle LowEnergy A single wash for pre-rinsed or lightly soiled loads. NOTE: The cycle pauses while the dishwasher heats water to 135°F (57°C) in the final rinse (marked t). If the Hi-Temp Wash option is selected water will also be heated in the main wash (marked 1_). See page 13. eM ° ot ° 60* Rinse & Hold For rinsing a few items to be washed one or more days later. Do not use detergent.
Heat Dry option When the Heat Dry option is selected, air in the dishwasher is heated during the =dry" part of the cycle. The HEAT DRY signal light will be on when this option is selected. For best drying results, use a liquid rinse agent. NOTE: The Heat Dry option is not available during the Rinse & Hold cycle. Air Dry option When the Air Dry option is selected, air in the dishwasher is not heated during the "dry" part of the cycle. The AIR DRY signal light will be on when this option is selected.
Using What type the detergent of detergent dispenser to use • Use automatic dishwasher detergent only. Other detergents are too mild and much too sudsy to work in the dishwasher. • Follow manufacturer's directions when using liquid automatic dishwasher detergent or concentrated powder detergent. • Do not add detergent until you are ready to wash. • Store detergent tightly closed in a cool, dry place. Fresh automatic dishwasher detergent is necessary for best washing results.
How much detergent to use The amount of detergent to use depends on the hardness of your water. If too little is used, dishes won't be clean. However, if too much is used in soft water, glassware will begin to etch. • HARD-Fill one or both sections to the top of third step (3 tablespoons) if water hardness is 8 or more grains per gallon, or 136 or more parts per million.
On some models: 1. Press the flexible clear top of the Fill Indicator Cap to draw rinse agent into cap. NOTE: You may need to press cap two or three times to remove all of the air bubbles from the cap. 2. When rinse agent does not show in cap, even after pressing flexible cap several times, dispenser needs refilling. To fill Press flexible clear top, on some models dispenser You do not have to wait until the dispenser is empty to refill it, but do not overfill it.
Water temperature tips Hot water dissolves and activates the dishwashing detergent. Hot water also dissolves grease on dishes and helps dry glasses spot-free. Use the Hi-Temp option if you keep your water heater at a low setting. For best dishwashing results, water must be at least 120°F (49°C) as it enters the dishwasher. To check water temperature 1. Run hot water at the faucet closest to your dishwasher. Let the water run for at least one minute. 2.
Special tips on dishwasher use If you have any doubts about washing a particular piece of dishware, check with the manufacturer to see if it is dishwasher safe. NOTE: It is the user's respons_ility to determine if dishware should be washed in a dishwasher. Material Aluminum Dishwasher Safe? Cast Iron No China/ Stoneware Yes Always check manufacturer's recommendations before washing. Antique, hand-painted or over-the-glaze patterns may fade. Gold leaf may discolor or fade.
Loading Your Dishwasher In This Section Page Page Preparing to load the dishwasher ... 19 Loading the silverware basket ........ 21 Loading the top reck ........................ 19 Loading the cutlery basket .............. 22 Loading the bottom rack .................. 20 This section tells you how to properly load your dishwasher for the best washing and rinsing results. Preparing to load the dishwasher • To save water and energy, do not rinse dishes before putting them into the dishwasher.
Mixed load • Load plastic items in the top reck only. Only plastic items marked =dishwasher safe" are recommended. Do not cover third level wash • Load plastic items so the force of the spray does not move them during the cycle. • Plastic items can be melted in the bottom rack. Utensil load • Small bowls, pans and other utensils can be placed in the top reck.
Dish load • Place plates, soup bowls, etc., between prongs and facing inward to the spray. • Do not place items directly over spray tower. Utensil load • Load cookie sheets, cake pans and other large items at sides and back. Loading such items in front may keep water spray from reaching detergent dispenser and silverware basket. NOTE: • Do not load glasses, cups or plastic items in the bottom rack. Utensil load • When lower rack is removed, replace with bumpers in front.
• Load forks and spoons so they don't nest together. Spray cannot reach nested items. • Mix items in each section of the basket with some pointing up and some down. • Small items (baby bottle caps, jar lids, etc.) can be put in any section. To remove the basket 1. Grab the basket by the handle and slide it toward the top of the door. 2. Lift the basket off the holding buttons. To replace the basket 1. Set the basket on the holding buttons. 2.
Caring For Your Dishwasher Your new dishwasher is designed to give you many years of dependable service. There are a few things you can do to maintain your dishwasher properly. This section tells you how to clean and care for your dishwasher. Refer to "Solution chart" on pages 24-26 for special cleaning problems. Personal Injury Hazard Before cleaning interior or filter screen, wait at least 20 minutes after a cycle for the heating element to cool down. Failure to do so can result in bum injuries.
Common Dishwashing Problems In This Section Page Solution chart .................................. 24 Solution Page Removing spots and film ................. 26 chart A convenient checklist for handling minor performance problems. Go over this list before calling for service. If you are unable to solve your dishwasher's problem, rum to page 27 for service information. Problem Cause Solution Food Soil Left on Dishes improper loading Follow loading instructions on pages 19-22.
Problem Cause Solution Spoffing and Riming (continued) Water temperature is too low Use the Hi-Temp option. If needed, turn home water heater up to ensure water entering dishwasher is 120°F (49°C) minimum. See recommended procedure on page 17. Use of incorrect detergents Use recommended dishwasher detergents only. Incorrect amount of detergent Follow recommendations on pages 14 and 15 for amount. Heavy soil and/or hard water generally require extra detergent.
Problem Cause Solution Brown Stains on Dishes and Dishwasher interior High iron content in water supply Remove by washing dishes (after food soil has been removed) with I teaspoon to 1 tablespoon of citric acid crystals added to covered section of detergent dispenser. Do not use detergent. Follow with a Low Energy cycle with detergent. If treatment is needed more often than every other month, the installation of an iron removal unit is recommended.
If You Need Assistance Or Service This section is designed to help you save the cost of a service call. When calling our Consumer Assistance Center for help or calling for service, please provide a detailed description of the problem, your appliance's complete model and serial numbers and the purchase date. (See page 2.) This information will help us respond properly to your request. 1. Before calling for assistance ... Please check the chart below for problems you can fix.
PROBLEM White residue appears on front of access panel CHECK THE FOLLOWING Is too much detergent being used? See pages 14 and 15 for recommended amounts of detergent. Some liquid detergents develop excess foam and build up on access panel. Try a different brand to reduce foaming and eliminate build-up. WATER HEATING signal light flashes Is the water supply less than 120°F (49°C) when it entem the dishwasher? See pages 10 and 17.
2. If you need assistance*... Call Whirlpool Consumer Assistance Center telephone number. Dial toll-free from anywhere in the U.S.A.: 1-8OO-253-1301 and talk with one of our trained consultants. The consultant can instruct you in how to obtain satisfactory operation from your appliance or, if service is necessary, recommend a qualified service company in your area. If you prefer, write to: Mr.
POWER covered CLEAN TM washing by your warranty system parts Third level wash tower m ,tower Lower spray arm POWER CLEAN TM module and motor
WHIRLPOOU Dishwasher Warranty LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY From Date of Purchase FSI _ replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by an authorized Whirlpool® service company. LIMITED ONE-YEAR WARRANTY Second Year From Date of Purchase FSP replacement parts for any part of the POWER CLEAN _ Washing System if defective in materials or workmanship. These parts are shown on page 31 of this book.
