Specifications

4-3
e) Lift the top edge of the console and
unhook it from the holder clips.
d)
Remove the two screws at the recessed
hole and bottom of the console.
6. T
o remove the touchpad/LED assem-
bly:
a)
Pull the selector knob off the switch
shaft.
b)
Press the seven console locking tabs,
and unsnap the touchpad/LED as-
sembly, then lift the assembly from the
console and remove it.
f)
Press the locking tab on the right rear
side of the console inward, and re-
move the console.
Console Screws
Console
Locking Tab
Press
Lift Top Edge
Of Console
Release 7 Console Locking Tabs
Touchpad/LED Assembly
Pull Off
Selector Knob