Specifications

4-13
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover from the washer
(see page 4-2 for the procedure).
REMOVING THE DETERGENT DISPENSER MOTOR
Detergent Dispenser Motor
4. Lift the locking tabs and remove the two
wire connectors from the detergent dis-
penser
motor terminals. NOTE: When
you
reconnect the wire connectors, make
sure to position the connector with the
blue stripe on top.
5.
Pry up on the cam actuator and unsnap it
from the motor shaft.
6.
Remove the mounting screw from the
detergent dispenser motor and remove
the motor.
Blue Stripe
Dispenser Motor
Wire Connectors
Motor Shaft
Mounting Screw
Cam Actuator