Specifications

6-12
PROBLEM
POSSIBLE CAUSE/TEST
NOTE: Possible Cause/Tests must be performed in the
sequence shown for each problem.
WON’T DRAIN
1. Unplug washer or disconnect power.
2. Check wire harness connections.
3. Check drain pump.
4. Check drain pump motor.
5. Check that the drain hose and drain pump filter are clear
of foreign objects.
6. Plug in washer or reconnect power.
7. Verify CCU operation by running a Diagnostic Test or
any cycle.
MACHINE
VIBRATES
1. Remove shipping system.
2. Check installation.
3. Check leveling feet.
INCORRECT
WATER
TEMPERATURE
1. Check that the inlet hoses are connected properly.
2. Unplug washer or disconnect power.
3. Check the water heater and wire harness connections
to it.
4. Check water temperature sensor for an abnormal
condition. See the Water Temperature Sensor section .
5. Plug in washer or reconnect p
ower.
6. Verify CCU operation by running a Diagnostic Test or
any cycle.
DISPLAY
FLASHING
See Failure/Error Display Codes.