Instructions for use WASHING MACHINE Contents GB English,1 FR Français, 13 NL Nederlands, 37 PT Portuguęs, 49 ES Español, 25 I Italiano, 61 GB Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 4 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Prec
Installation GB ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/ herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating.
Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; ! Do not use extension cords or multiple sockets. ! The cable should not be bent or compressed. ! The power supply cable must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these regulations are not respected.
Care and maintenance GB Cutting off the water and electricity supplies Cleaning the pump • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. The washing machine is fitted with a self-cleaning pump which does not require any maintenance. Sometimes, small items (such as coins or buttons) may fall into the pre-chamber which protects the pump, situated in its bottom part.
Precautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.
Description of the washing machine and starting a wash cycle GB Control panel WASH CYCLE PROGRESS/ DELAY TIMER indicator lights SPIN SPEED knob ON/OFF button TEMPERATURE indicator light knob START/PAUSE Detergent dispenser drawer FUNCTION WASH CYCLE knob Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”). ON/OFF button: switches the washing machine on and off. WASH CYCLE knob: programmes the wash cycles.
Indicator lights The indicator lights provide important information. This is what they can tell you: Delayed start If the DELAY TIMER function has been activated (see “Personalisation”), after the wash cycle has been started the indicator light corresponding to the selected delay period will begin to flash: Wash cycle phase indicator lights Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress.
Wash cycles Max. temp. (°C Max. speed (rpm) Max. load (Kg) Residual dampness % Energy consumption kWh Total water lt Cycle duration Table of wash cycles Wash cycles GB 90° 1000 - 7 62 2,21 78 170’ 60° (Max. 90°) 1000 - 7 62 1,13 52,5 180’ Detergents Description of the wash cycle Fabric BlePrewash Wash softeach ner Essentials cycles 1 Cotton + Prewash: extremely soiled whites. 2 Cotton Standard 60° (1): heavily soiled whites and resistant colours.
Personalisation Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. ! Exception: if the 2 programme is selected, the temperature can be increased up to a value of 90°C.
Detergents and laundry GB Detergent dispenser drawer Preparing the laundry Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. • Divide the laundry according to: - the type of fabric/the symbol on the label.
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or is not making contact. • There is no power in the house. The wash cycle does not start. • • • • • The washing machine door is not closed properly.
Service GB Before calling for Assistance: • Check whether you can solve the problem alone (see “Troubleshooting”); • Restart the programme to check whether the problem has been solved; • If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate. ! Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N).
Mode d’emploi LAVE-LINGE Sommaire FR Français FR Installation, 14-15 Déballage et mise à niveau Raccordements eau et électricité Premier cycle de lavage Caractéristiques techniques Entretien et soin, 16 Coupure de l’arrivée d’eau et du courant Nettoyage du lave-linge Nettoyage du tiroir à produits lessiviels.
Installation FR ! Conserver ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, veiller à ce qu’il suive toujours le lave-linge pour que son nouveau propriétaire soit informé sur son mode de fonctionnement et puisse profiter des conseils correspondants. ! Lire attentivement les instructions: elles fournissent des conseils importants sur l’installation, l’utilisation et la sécurité de l’appareil. Déballage et mise à niveau Déballage 1.
Raccordement du tuyau de vidange 65 - 100 cm Raccorder le tuyau d’évacuation, sans le plier, à un conduit d’évacuation ou à une évacuation murale placés à une distance du sol comprise entre 65 et 100 cm; ou bien l’accrocher à un évier ou à une baignoire, dans ce cas, fixer le support en plastique fourni avec l’appareil au robinet (voir figure). L’extrémité libre du tuyau d’évacuation ne doit pas être plongée dans l’eau.
Entretien et soin FR Coupure de l’arrivée d’eau et du courant • Fermer le robinet de l’eau après chaque lavage. Cela réduit l’usure de l’installation hydraulique du lave-linge et évite tout danger de fuites. • Débrancher la fiche de la prise de courant lors de tout nettoyage du lave-linge et pendant tous les travaux d’entretien. Nettoyage du lave-linge Pour nettoyer l’extérieur et les parties en caoutchouc, utiliser un chiffon imbibé d’eau tiède et de savon. N’utiliser ni solvants ni abrasifs.
Précautions et conseils ! Ce lave-linge a été conçu et fabriqué conformément aux normes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attentivement. Sécurité générale Le symbole de la ‘’poubelle barrée’’ est apposée sur tous les produits pour rappeler les obligations de collecte séparée. Les consommateurs devront contacter les autorités locales ou leur revendeur concernant la démarche à suivre pour l’enlèvement de leur vieil appareil.
Description du lave-linge et démarrage d’un programme FR Bandeau de commandes Voyants DÉROULEMENT CYCLE/DÉPART DIFFÉRÉ Bouton ESSORAGE Touche ON/OFF Bouton TEMPÉRATURE Voyant HUBLOT VERROUILLÉ Touche avec voyant Tiroir à produits lessiviels Touches avec voyants START/PAUSE FONCTION Bouton PROGRAMMES Tiroir à produits lessiviels: pour charger les produits lessiviels et les additifs (voir “Produits lessiviels et linge”). Touche ON/OFF: pour allumer ou éteindre le lave-linge.
Voyants Les voyants fournissent des informations importantes.
Programmes Temp. maxi. (°C) Vitesse maxi (tours minute) Prélavage Lavage Assouplissant Javel Charge maxi) (Kg) Humidité résiduelle % Consommation d’énergie kWh Eau totale lt Durée cycle FR Programmes Tableau des programmes 90° 1000 - 7 62 2,21 78 170’ 60° (Max. 90°) 1000 - 7 62 1,13 52,5 180’ Detersivi Description du Programme Quotidien 1 Coton Prélavage: blancs extrêmement sales. 2 Coton standard 60°C (1): blancs et couleurs résistantes très sales.
Personnalisations Sélection de la température Tourner le bouton TEMPÉRATURE pour sélectionner la température de lavage (voir Tableau des programmes). La température peut être abaissée jusqu’au lavage à froid ( ). La machine interdira automatiquement toute sélection d’une température supérieure à la température maximale prévue pour chaque programme. ! Exception: lors de la sélection du programme 2 la température peut être augmentée jusqu’à 90°.
Produits lessiviels et linge FR Tiroir à produits lessiviels Triage du linge Un bon résultat de lavage dépend aussi d’un bon dosage de produit lessiviel: un excès de lessive ne lave pas mieux, il incruste l’intérieur du lave-linge et pollue l’environnement. • Trier correctement le linge d’après: - le type de textile / le symbole sur l’étiquette. - les couleurs: séparer le linge coloré du blanc. • Vider les poches et contrôler les boutons.
Anomalies et remèdes Il peut arriver que le lave-linge ne fonctionne pas bien. Avant d’appeler le Service de dépannage (voir “Assistance”), contrôler s’il ne s’agit pas par hasard d’un problème facile à résoudre à l’aide de la liste suivante. Anomalies: Causes / Solutions possibles: Le lave-linge ne s’allume pas. • La fiche n’est pas branchée dans la prise de courant ou mal branchée. • Il y a une panne de courant. Le cycle de lavage ne démarre pas. • • • • • Le hublot n’est pas bien fermé.
Assistance FR Avant d’appeler le service après-vente: • Vérifier si on ne peut pas résoudre l’anomalie par ses propres moyens (voir “Anomalies et Remèdes”); • Remettre le programme en marche pour contrôler si l’inconvénient a disparu; • Autrement, contacter le Centre d’Assistance technique agréé au numéro de téléphone indiqué sur le certificat de garantie. ! Ne jamais s’adresser à des techniciens non agréés. Communiquer: • le type de panne; • le modèle de l’appareil (Mod.); • son numéro de série (S/N).
Manual de instrucciones LAVADORA Sumario ES Español ES Instalación, 26-27 Desembalaje y nivelación Conexiones hidráulicas y eléctricas Primer ciclo de lavado Datos técnicos Mantenimiento y cuidados, 28 Interrumpir el agua y la corriente eléctrica Limpiar la lavadora Limpiar el contenedor de detergentes Cuidar la puerta y el cesto Limpiar la bomba Controlar el tubo de alimentación de agua Precauciones y consejos, 29 ECO7L 1051 Seguridad general Eliminaciones Descripción de la lavadora y comienzo de un
Instalación ES ! Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, verifique que permanezca junto con la lavadora para informar al nuevo propietario sobre el funcionamiento y brindar las correspondientes advertencias. Una cuidadosa nivelación brinda estabilidad a la máquina y evita vibraciones, ruidos y desplazamientos durante el funcionamiento.
Conexión del tubo de descarga 65 - 100 cm Conecte el tubo de descarga, sin plegarlo, a una tubería de descarga o a una descarga de pared colocadas a una altura del piso entre 65 y 100 cm; o apóyelo en el borde de un lavamanos o de una bañera, uniendo la guía suministrada con el aparato, al grifo (ver la figura). El extremo libre del tubo de descarga no debe permanecer sumergido en el agua. ! No utilice prolongaciones ni conexiones múltiples. ! El cable no debe estar plegado ni sufrir compresiones.
Mantenimiento y cuidados ES Interrumpir el agua y la corriente eléctrica Limpiar la bomba • Cierre el grifo de agua después de cada lavado. De este modo se limita el desgaste de la instalación hidráulica de la lavadora y se elimina el peligro de pérdidas. La lavadora posee una bomba autolimpiante que no necesita mantenimiento. Pero puede suceder que objetos pequeños (monedas, botones) caigan en la precámara que protege la bomba, situada en la parte inferior de la misma.
Precauciones y consejos ! La lavadora fue proyectada y fabricada en conformidad con las normas internacionales de seguridad. Estas advertencias se suministran por razones de seguridad y deben ser leídas atentamente. Seguridad general El símbolo del cubo de basura tachado se marca sobre todos los productos para recordar al consumidor la obligación de separarlos para la recogida selectiva.
Descripción de la lavadora y comienzo de un programa ES Panel de control Pilotos DE AVANCE DEL CICLO/COMIENZO RETRASADO Mando de CENTRIFUGADO Botón de ON/OFF Piloto PUERTA Mando de BLOQUEADA TEMPERATURA Contenedor de detergentes Botones con pilotos Mando de Botón con piloto START/ PAUSE FUNCIÓN PROGRAMAS Contenedor de detergentes: para cargar detergentes y aditivos (ver “Detergentes y ropa”). Botón de ON/OFF: para encender y apagar la lavadora. Mando de PROGRAMAS: para elegir los programas.
Pilotos Los pilotos suministran información importante.
Programas Humedad residual % Consumo de energía kWh Agua total lt Duración del ciclo Descripción del Programa Carga máx. (Kg) ES Programas Tabla de programas 1000 - 7 62 2,21 78 170’ 60° (Max. 90°) 1000 - 7 62 1,13 52,5 180’ Temp. max. (°C) Detergentes Velocidad máx. Pre- La- Suavi- Blan(r.p.m.) lava- vado zante queador do Diario 1 2 3 Prelavado Algodón 90°C: blancos sumamente sucios. Programa normal de algodón a 60°C (1): blancos y colores resistentes muy sucios.
Personalizaciones Seleccionar la temperatura ES Girando el mando de la TEMPERATURA se selecciona la temperatura de lavado (ver la Tabla de programas). La temperatura se puede disminuir hasta el lavado en frío ( ). La máquina impedirá automáticamente seleccionar una temperatura mayor que la máxima prevista para cada programa. ! Excepción: cuando se selecciona el programa 2, la temperatura se puede aumentar hasta 90°.
Detergentes y ropa ES Contenedor de detergentes Preparar la ropa El buen resultado del lavado depende también de la correcta dosificación del detergente: si se excede la cantidad, no se lava de manera más eficaz, sino que se contribuye a encostrar las partes internas de la lavadora y a contaminar el medio ambiente. • Subdivida la ropa según: - el tipo de tejido / el símbolo en la etiqueta. - los colores: separe las prendas de color y las blancas. • Vacíe los bolsillos y controle los botones.
Anomalías y soluciones Puede suceder que la lavadora no funcione. Antes de llamar al Servicio de Asistencia Técnica (ver “Asistencia”),controle que no se trate de un problema de fácil solución utilizando la siguiente lista. Anomalías: Posibles causas / Solución: La lavadora no se enciende. • El enchufe no está introducido en la toma de corriente, o no hace contacto. • En la casa no hay corriente. El ciclo de lavado no comienza. • • • • • La puerta no está correctamente cerrada.
Asistencia ES Antes de llamar al Servicio de Asistencia Técnica: • Verifique si la anomalía la puede resolver Ud. solo (ver “Anomalías y soluciones”); • Vuelva a poner en marcha el programa para controlar si el inconveniente fue resuelto; • Si no es así, llame al Servicio de Asistencia técnica autorizado, al número de teléfono indicado en el certificado de garantía. ! No recurra nunca a técnicos no autorizados. Comunique: • el tipo de anomalía; • el modelo de la máquina (Mod.); • el número de serie (S/N ).
Gebruiksaanwijzing WASAUTOMAAT Inhoud NL Nederlands NL Installatie, 38-39 Uitpakken en waterpas zetten Hydraulische en elektrische aansluitingen Eerste wascyclus Technische gegevens Onderhoud en verzorging, 40 Afsluiten van water en stroom Reinigen van de wasautomaat Reinigen van het wasmiddelbakje Onderhoud van deur en trommel Reinigen van de pomp Controleren van de buis van de watertoevoer Voorzorgsmaatregelen en advies, 41 ECO7L 1051 Algemene veiligheid Afvalverwijdering Beschrijving van de wasaut
Installatie NL ! Het is belangrijk deze handleiding te bewaren voor latere raadpleging. In het geval u het apparaat verkoopt, of u verhuist, moet het boekje bij de wasautomaat blijven zodat de nieuwe gebruiker de functies en betreffende raadgevingen kan doornemen. ! Lees de instructies aandachtig door: u vindt er belangrijke informatie betreffende installatie, gebruik en veiligheid. Uitpakken en waterpas zetten Uitpakken 1. De wasautomaat uitpakken. 2.
Aansluiting van de afvoerbuis 65 - 100 cm Verbind de buis, zonder hem te buigen, aan een afvoerleiding of aan een afvoer in de muur tussen de 65 en 100 cm van de grond ! Het snoer mag niet gebogen of samengedrukt worden. ! De voedingskabel mag alleen door een bevoegde installateur worden vervangen. Belangrijk! De fabrikant kan niet aansprakelijk worden gesteld wanneer deze normen niet worden nageleefd.
Onderhoud en verzorging NL Afsluiten van water en stroom Reinigen van de pomp • Sluit na iedere wasbeurt de kraan af. Hiermee beperkt u slijtage van de waterinstallatie van de wasmachine en voorkomt u lekkage. De wasautomaat is voorzien van een zelfreinigende pomp en hoeft dus niet te worden onderhouden. Het kan echter gebeuren dat kleine voorwerpen (muntjes, knopen) in het voorvakje dat de pomp beschermt en zich aan de onderkant ervan bevindt, terechtkomen.
Voorzorgsmaatregelen en advies ! De wasmachine is ontworpen en geproduceerd volgens de internationale veiligheidsnormen. Deze aanwijzingen zijn voor uw eigen veiligheid geschreven en moeten aandachtig worden doorgenomen. Algemene veiligheid Het symbool op het product van de “afvalcontainer met een kruis erdoor” herinnert u aan uw verplichting, dat wanneer u het apparaat vernietigt, het apparaat apart moet worden ingezameld.
Beschrijving van de wasautomaat en starten van een programma NL Bedieningspaneel Controlelampjes VOORTGANG CYCLUS/ UITGESTELDE START CENTRIFUGEKNOP ON/OFF toets Controlelampje DEUR GEBLOKKEERD TEMPERATUUR KNOP Toets met controlelampje Wasmiddelbakje Toetsen met controlelampjes FUNCTIE START/PAUSE PROGRAMMAKNOP Wasmiddelbakje: voor wasmiddelen en wasversterkers (zie “Wasmiddelen en wasgoed”). Toets ON/OFF: voor het in- en uitschakelen van de wasautomaat.
Controlelampjes De controlelampjes geven belangrijke informatie.
Programma’s Overgebleven vochtigheid % Energieverbruik kWh Totaal waterlt Duur cyclus 1000 - 7 62 2,21 78 170’ 60° 2 Standaardprogramma voor katoen op 60° (1): zeer vuil wit en kleurecht bont wasgoed. (Max. 90°) 1000 - 7 62 1,13 52,5 180’ 3 Standaardprogramma voor katoen op 40° (2): niet zo vuile witte en bonte fijne was. 4 Synthetisch: Zeer vuile kleurvaste bonte was.
Persoonlijke instellingen Instellen van de temperatuur NL Door aan de TEMPERATUURKNOP te draaien kunt u de wastemperatuur instellen (zie Programmatabel). De temperatuur kan verlaagd worden tot aan koud wassen ( ). De machine voorkomt dat u een temperatuur instelt die hoger is dan het maximum voorzien voor dat programma. ! Uitzondering: als u het programma 2 selecteert kunt u de temperatuur tot op 90° instellen.
Wasmiddelen en wasgoed NL Wasmiddelbakje Voorbereiden van het wasgoed Een goed wasresultaat hangt ook af van de juiste dosis wasmiddel: te veel wasmiddel maakt het wassen niet beter. Het wasmiddel blijft aan de binnenzijde van de wasautomaat zitten en zorgt voor het vervuilen van het milieu. • • • ! Gebruik waspoeder voor witte katoenen was, voor de voorwas en voor het wassen op temperaturen van meer dan 60°C. ! Volg de aanwijzingen op de wasmiddelverpakking.
Storingen en oplossingen Het kan gebeuren dat de wasautomaat niet werkt. Voor u contact opneemt met de Servicedienst (zie “Service”)moet u controleren of het niet een storing betreft die u zelf makkelijk kunt verhelpen met behulp van de volgende lijst. Storingen: Mogelijke oorzaken / Oplossing: De wasautomaat gaat niet aan. • De stekker zit niet in het stopcontact of niet ver genoeg om contact te maken. • Het hele huis zit zonder stroom. De wascyclus start niet. • • • • • De deur zit niet goed dicht.
Service NL Voordat u de Servicedienst inschakelt: • Controleer eerst of u het probleem zelf kunt oplossen (zie “Storingen en oplossingen”). • Start het programma opnieuw om te controleren of de storing is verholpen; • Als dit niet het geval is moet u contact opnemen met de erkende Technische Servicedienst via het telefoonnummer dat op het garantiebewijs staat. ! Wendt u nooit tot een niet erkende installateur. Vermeld: • het type storing; • het model van de machine (Mod.); • het serienummer (S/N).
Instruções para utilização MÁQUINA DE LAVAR ROUPA Sumário PT Português PT Instalação, 50-51 Desembalar e nivelar Ligações hidráulicas e eléctricas Primeiro ciclo de lavagem Dados técnicos Manutenção e cuidados, 52 Interromper a alimentação de água e de corrente eléctrica Limpar a máquina de lavar roupa Limpar a gaveta dos detergentes Cuidados com a porta de vidro e o tambor Limpar a bomba Verificar o tubo de alimentação de água Precauções e conselhos, 53 ECO7L 1051 Segurança geral Eliminação Descriçã
Instalação PT ! É importante guardar este manual para poder consultá-lo a qualquer momento. Se a máquina for vendida, cedida ou transferida, certifique-se que este manual permaneça com a máquina para informar o novo proprietário acerca do seu funcionamento e das respectivas advertências. ! Leia com atenção estas instruções: há importantes informações acerca da instalação, da utilização e da segurança. Desembalar e nivelar Desembalar 1. Tire a máquina de lavar roupa da embalagem. 2.
Ligação do tubo de descarga 65 - 100 cm Ligue o tubo de descarga, sem dobrálo, a um conduto de descarga ou a uma descarga de parede colocados entre 65 e 100 cm do chão; ! Não empregue extensões nem fichas múltiplas. ! O cabo não deve ser dobrado nem apertado. ! O cabo de alimentação deve ser substituído somente por técnicos autorizados. Atenção! O fabricante declina toda a responsabilidade se estas regras não forem respeitadas.
Manutenção e cuidados PT Interromper a alimentação de água e de corrente eléctrica • Feche a torneira da água depois de cada lavagem. Desta maneira diminuiu-se o desgaste do sistema hidráulico da máquina de lavar roupa e elimina-se o risco de inundação. • Tire a ficha da tomada eléctrica quando for limpar a máquina de lavar roupa e durante os trabalhos de manutenção. Limpar a máquina de lavar roupa A parte externa e as peças em borracha podem ser limpas com um pano molhado com água morna e sabão.
Precauções e conselhos ! Esta máquina de lavar roupa foi projectada e fabricada em conformidade com os regulamentos internacionais de segurança. Estas advertências são fornecidas por razões de segurança e devem ser lidas com atenção. Segurança geral • Este aparelho foi projectado exclusivamente para um uso doméstico. • constituído por um contentor de lixo barrado com uma cruz deve ser colocado em todos os produtos por forma a recordar a obrigatoriedade de recolha separada.
Descrição da máquina de lavar roupa e como iniciar um programa PT Painel de comandos Indicadores LUMINOSOS DE AVANÇO DO CICLO/ INÍCIO POSTERIOR Selector de CENTRIFUGAÇÃO Tecla de ON/OFF Selector da TEMPERATURA Indicador luminoso PORTA BLOQUEADA Tecla com indicador luminoso Gaveta dos detergentes Teclas com indicadores luminosos de START/PAUSE FUNÇÕES Selector de PROGRAMAS Gaveta dos detergentes: para colocar detergentes e aditivos (veja “Detergentes e roupa”).
Indicadores luminosos Os indicadores luminosos fornecem informações importantes. Vejamos o que significam: Indicadores luminosos fase em curso Uma vez seleccionado e iniciado o ciclo de lavagem desejado, os indicadores luminosos se acenderão progressivamente para indicar o estado de avanço: Lavagem Início posterior Se tiver sido activada a função “Início posterior” (veja “Personalizações”) depois de ter iniciado o programa, começará a lampejar o indicador luminoso relativo ao atraso seleccionado.
Programas Tabela dos programas Velocità max. (rotações por minuto) Lavagem Amaciador Lixívia Carga max. (Kg) Humidade residual % Consumo de energia kWh Água total lt Durata ciclo Descrição do Programa Temp. max. (°C) Prélavagem Programas PT 90° 1000 - 7 62 2,21 78 170’ 1000 - 7 62 1,13 52,5 180’ 1000 - 7 62 1,00 75 170’ Detersivi Quotidiano (programas para todos os dias) 1 Algodão Pré-lavagem 90°C: brancos e coloridos resistentes muito sujos.
Personalizações Seleccione a temperatura Gire o selector da TEMPERATURA para seleccionar a temperatura de lavagem (veja a Tabela dos programas). A temperatura pode ser diminuída até a lavagem a frio ( ). A máquina impedirá automaticamente a configuração de uma temperatura superior à máxima prevista para cada um dos programas. ! Excepção: seleccionando o programa 2 a temperatura pode ser aumentada até a 90º.
Detergentes e roupa PT Gaveta dos detergentes Preparar a roupa O bom resultado da lavagem depende também do emprego da dose certa de detergente: com excessos não se lava de maneira mais eficaz, mas contribui-se para formar crostas nas peças internas da máquina de lavar roupa e poluir o meio ambiente. • Divida a roupa em função: - do tipo de tecido / do símbolo na etiqueta. - das cores: separe as peças coloridas das brancas. • Esvazie as algibeiras e verifique se há botões soltos.
Anomalias e soluções Pode acontecer que a máquina de lavar roupa não funcione. Antes de telefonar para a Assistência Técnica (veja “Assistência”), verifique se não se trata de um problema fácil de resolver com ajuda da seguinte lista. Anomalias: Possíveis causas / Solução: A máquina de lavar roupa não liga. • A ficha não está colocada na tomada eléctrica, ou não o suficiente para haver contacto. • Em casa não há corrente. O ciclo de lavagem não inicia. • • • • • A porta de vidro não está bem fechada.
Assistência PT Antes de contactar a Assistência Técnica: • Verifique se consegue resolver a anomalia sozinho (veja “Anomalias e soluções”); • Reinicie o programa para verificar se o inconveniente foi resolvido; • Em caso negativo, contacte a o Centro de Assistência técnica autorizada no número de telefone indicado no certificado de garantia. ! Nunca recorra a técnicos não autorizados. Comunique: • o tipo de anomalia; • o modelo da máquina (Mod.); • o número de série (S/N).
Istruzioni per l’uso LAVABIANCHERIA Sommario I Italiano I Installazione, 62-63 Disimballo e livellamento Collegamenti idraulici ed elettrici Primo ciclo di lavaggio Dati tecnici Manutenzione e cura, 64 Escludere acqua e corrente elettrica Pulire la lavabiancheria Pulire il cassetto dei detersivi Curare oblò e cestello Pulire la pompa Controllare il tubo di alimentazione dell’acqua Precauzioni e consigli, 65 ECO7L 1051 Sicurezza generale Smaltimento Descrizione della lavabiancheria e avviare un progra
Installazione I ! È importante conservare questo libretto per poterlo consultare in ogni momento. In caso di vendita, di cessione o di trasloco, assicurarsi che resti insieme alla lavabiancheria per informare il nuovo proprietario sul funzionamento e sui relativi avvertimenti. ! Leggere attentamente le istruzioni: ci sono importanti informazioni sull’installazione, sull’uso e sulla sicurezza. Disimballo e livellamento Disimballo 1. Disimballare la lavabiancheria. 2.
Collegamento del tubo di scarico 65 - 100 cm Collegare il tubo di scarico, senza piegarlo, a una conduttura di scarico o a uno scarico a muro posti tra 65 e 100 cm da terra; ! Non usare prolunghe e multiple. I ! Il cavo non deve subire piegature o compressioni. ! Il cavo di alimentazione deve essere sostituito solo da tecnici autorizzati. Attenzione! L’azienda declina ogni responsabilità qualora queste norme non vengano rispettate.
Manutenzione e cura I Escludere acqua e corrente elettrica • Chiudere il rubinetto dell’acqua dopo ogni lavaggio. Si limita così l’usura dell’impianto idraulico della lavabiancheria e si elimina il pericolo di perdite. • Staccare la spina della corrente quando si pulisce la lavabiancheria e durante i lavori di manutenzione. 2.
Precauzioni e consigli ! La lavabiancheria è stata progettata e costruita in conformità alle norme internazionali di sicurezza. Queste avvertenze sono fornite per ragioni di sicurezza e devono essere lette attentamente. Sicurezza generale Il simbolo del cestino barrato è riportato su tutti i prodotti per ricordare gli obblighi di raccolta separata. Per ulteriori informazioni, sulla corretta dismissione degli elettrodomestici, i detentori potranno rivolgersi al servizio pubblico preposto o ai rivenditori.
Descrizione della lavabiancheria e avviare un programma I Pannello di controllo SPIE AVANZAMENTO CICLO/PARTENZA RITARDATA Manopola CENTRIFUGA Tasto ON/OFF Spia OBLÒ BLOCCATO Manopola TEMPERATURA Tasto con spia Cassetto dei detersivi Tasti con spie FUNZIONE START/ PAUSE Manopola PROGRAMMI Cassetto dei detersivi: per caricare detersivi e additivi (vedi “Detersivi e biancheria”). Tasto ON/OFF: per accendere e spegnere la lavabiancheria. Manopola PROGRAMMI: per impostare i programmi.
Spie Le spie forniscono informazioni importanti.
Programmi Tabella dei programmi Lavaggio Ammorbidente Candeggina Carico max. (Kg) Umidità residua % Consummo energia kWh Acqua totale lt Durata ciclo 1 Cotone + Prelavaggio: Bianchi estremamente sporchi. 1000 - 7 62 2,21 78 170’ 2 60° Cotone standard 60° (1): bianchi e colorati resistenti molto sporchi. (Max. 90°) 1000 - 7 62 1,13 52,5 180’ 3 Cotone standard 40° (2): bianchi poco sporchi e colori delicati.
Personalizzazioni Impostare la temperatura I Ruotando la manopola TEMPERATURA si imposta la temperatura di lavaggio (vedi Tabella programmi). La temperatura si può ridurre sino al lavaggio a freddo ( ). La macchina impedirà automaticamente di impostare una temperatura maggiore a quella massima prevista per ogni programma. ! Eccezione: selezionando il programma 2 la temperatura può essere portata sino a 90°.
Detersivi e biancheria I Cassetto dei detersivi Preparare la biancheria Il buon risultato del lavaggio dipende anche dal corretto dosaggio del detersivo: eccedendo non si lava in modo più efficace e si contribuisce a incrostare le parti interne della lavabiancheria e a inquinare l’ambiente. • Suddividere la biancheria secondo: - il tipo di tessuto / il simbolo sull’etichetta. - i colori: separare i capi colorati da quelli bianchi. • Vuotare le tasche e controllare i bottoni.
Anomalie e rimedi Può accadere che la lavabiancheria non funzioni. Prima di telefonare all’Assistenza (vedi “Assistenza”), controllare che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco. Anomalie: Possibili cause / Soluzione: La lavabiancheria non si accende. • La spina non è inserita nella presa della corrente, o non abbastanza da fare contatto. • In casa non c’è corrente. Il ciclo di lavaggio non inizia.
Assistenza 195117482.01 11/2013 - Xerox Fabriano I Prima di contattare l’Assistenza: • Verificare se l’anomalia può essere risolta da soli (vedi “Anomalie e rimedi”). • Riavviare il programma per controllare se l’inconveniente è stato ovviato; • In caso negativo, contattare il Numero Unico 199.199.199*; ! Non ricorrere mai a tecnici non autorizzati. Comunicare: • il tipo di anomalia; • il modello della macchina (Mod.