Instructions for use WASHING MACHINE Contents FR GB English,1 Français, 13 NL Nederlands, 37 PT Portuguęs, 49 ES Español, 25 DE Deutsch, 61 GB Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine and starting a wash cycle, 4-5 Control panel Indicator lights Starting a wash cycle Wash cycles, 6 Table of wash cycles Personalisation, 7 ECO8F 1292 Setting the temperature Setting the spin speed
Installation GB ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating.
! Do not use extension cords or multiple sockets. Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; GB ! The cable should not be bent or compressed. ! The power supply cable must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these regulations are not respected.
Description of the washing machine and starting a wash cycle GB Control panel WASH CYCLE PROGRESS indicator lights DISPLAY ON/OFF button with indicator light Detergent dispenser drawer DOOR LOCKED TEMPERATURE button indicator light START/PAUSE SPIN SPEED button WASH CYCLE knob FUNCTION buttons with indicator lights button with indicator light CONTROL PANEL LOCK button with indicator light Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laun
Indicator lights The indicator lights provide important information. This is what they can tell you: Wash cycle phase indicator lights As the WASH CYCLE knob is rotated, the indicator lights illuminate, indicating the stages which will be performed by the machine in accordance with the selected wash cycle. Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress.
Wash cycles GB Wash cycles Table of wash cycles 5 Essentials cycles Cotton + Prewash: extremely soiled whites. Cotton: heavily soiled whites and resistant colours. Cotton (2): lightly soiled whites and delicate colours. Coloured cottons (3): lightly soiled whites and delicate colours. Synthetics: heavily soiled resistant colours. Synthetics: lightly soiled resistant colours. Mix 15’: to refresh lightly soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand).
Personalisation Setting the temperature GB By pressing the TEMPERATURE button to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the spin speed By pressing the SPIN SPEED button to set the spin speed for the selected wash cycle.
Detergents and laundry GB Detergent dispenser drawer Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. ! Do not use hand washing detergents because these create too much foam. Open the detergent dispenser drawer and pour 4 in the detergent or washing additive, as follows.
Precautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully.
Care and maintenance GB Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the washing machine The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or is not making contact. • There is no power in the house. The wash cycle does not start. • • • • • The washing machine door is not closed properly.
Service GB Before calling for Assistance: • Check whether you can solve the problem alone (see “Troubleshooting”); • Restart the programme to check whether the problem has been solved; • If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate. ! Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N).
Mode d’emploi LAVE-LINGE Sommaire FR Français FR Installation, 14-15 Déballage et mise à niveau Raccordements eau et électricité Premier cycle de lavage Caractéristiques techniques Description du lave-linge et démarrage d’un programme, 16-17 Bandeau de commandes Voyants Démarrage d’un programme Programmes, 18 Tableau des programmes Personnalisations, 19 ECO8F 1292 Sélection de la température Sélection de l’essorage Fonctions Produits lessiviels et linge, 20 Tiroir à produits lessiviels Cycle blanchi
Installation FR ! Conserver ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, veiller à ce qu’il suive toujours le lave-linge pour que son nouveau propriétaire soit informé sur son mode de fonctionnement et puisse profiter des conseils correspondants. Une bonne mise à niveau garantit la stabilité de l’appareil et évite qu’il y ait des vibrations, du bruit et des déplacements en cours de fonctionnement.
Raccordement du tuyau de vidange 65 - 100 cm Raccorder le tuyau d’évacuation, sans le plier, à un conduit d’évacuation ou à une évacuation murale placés à une distance du sol comprise entre 65 et 100 cm; ! N’utiliser ni rallonges ni prises multiples. FR ! Le câble ne doit être ni plié ni trop écrasé. ! Le câble d’alimentation ne doit être remplacé que par des techniciens agréés. Attention! Nous déclinons toute responsabilité en cas de non-respect des normes énumérées ci-dessus.
Description du lave-linge et démarrage d’un programme FR Bandeau de commandes Voyants DÉROULEMENT CYCLE AFFICHEUR Touche avec voyant ON/OFF Voyant Touche HUBLOT VERROUILLÉ TEMPÉRATURE Tiroir à produits lessiviels Touche ESSORAGE Bouton PROGRAMMES Touches avec voyants FONCTION Touche avec voyant MARCHE/ PAUSE Touche avec voyant VERROUILLAGE DES TOUCHES Tiroir à produits lessiviels: pour charger les produits lessiviels et les additifs (voir “Produits lessiviels et linge”).
Voyants Les voyants fournissent des informations importantes. Voilà ce qu’ils signalent: Voyants phase en cours Au fur et à mesure qu’on tourne le bouton des PROGRAMMES, les voyants s’allument pour indiquer les phases que l’appareil effectue selon le programme choisi.
Programmes FR Programmes Tableau des programmes 5 Programmes Quotidien Coton Prélavage 90°C: blancs extrêmement sales. Coton: blancs et couleurs résistantes très sales. Coton (2): blancs et couleurs délicates peu sales. Coton (3): blancs peu sales et couleurs délicates. Synthétique: couleurs résistantes très sales. Synthétique: couleurs résistantes peu sales. MIX 15': pour rafraîchir rapidement du linge peu sale (ne convient pas pour la laine, la soie et le linge à laver à la main).
Personnalisations Sélection de la température Appuyer sur la touche TEMPÉRATURE pour sélectionner la température de lavage (voir Tableau des programmes). La température peut être abaissée jusqu’au lavage à froid ( ). La machine interdira automatiquement toute sélection d’une température supérieure à la température maximale prévue pour chaque programme. Sélection de l’essorage Appuyer sur la touche ESSORAGE pour sélectionner la vitesse d’essorage du programme sélectionné.
Produits lessiviels et linge FR Tiroir à produits lessiviels Linge ou vêtements particuliers Un bon résultat de lavage dépend aussi d’un bon dosage de produit lessiviel: un excès de lessive ne lave pas mieux, il incruste l’intérieur du lave-linge et pollue l’environnement. Chemises: sélectionner le programme 8 approprié au lavage de chemises de couleurs et textiles différents. Il en prend le plus grand soin en réduisant le froissage.
Précautions et conseils ! Ce lave-linge a été conçu et fabriqué conformément aux normes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attentivement.
Entretien et soin FR Coupure de l’arrivée d’eau et du courant • Fermer le robinet de l’eau après chaque lavage. Cela réduit l’usure de l’installation hydraulique du lave-linge et évite tout danger de fuites. Nettoyage de la pompe Le lave-linge est équipé d’une pompe autonettoyante qui n’exige aucune opération d’entretien. Il peut toutefois arriver que de menus objets (pièces de monnaie, boutons) tombent dans la préchambre qui protège la pompe, placée en bas de cette dernière.
Anomalies et remèdes Il peut arriver que le lave-linge ne fonctionne pas bien. Avant d’appeler le Service de dépannage (voir “Assistance”), contrôler s’il ne s’agit pas par hasard d’un problème facile à résoudre à l’aide de la liste suivante. Anomalies: Causes / Solutions possibles: Le lave-linge ne s’allume pas. • La fiche n’est pas branchée dans la prise de courant ou mal branchée. • Il y a une panne de courant. Le cycle de lavage ne démarre pas. • • • • • Le hublot n’est pas bien fermé.
Assistance FR Avant d’appeler le service après-vente: • Vérifier si on ne peut pas résoudre l’anomalie par ses propres moyens (voir “Anomalies et Remèdes”); • Remettre le programme en marche pour contrôler si l’inconvénient a disparu; • Autrement, contacter le Centre d’Assistance technique agréé au numéro de téléphone indiqué sur le certificat de garantie. ! Ne jamais s’adresser à des techniciens non agréés. Communiquer: • le type de panne; • le modèle de l’appareil (Mod.); • son numéro de série (S/N).
Manual de instrucciones LAVADORA Sumario ES Español ES Instalación, 26-27 Desembalaje y nivelación Conexiones hidráulicas y eléctricas Primer ciclo de lavado Datos técnicos Descripción de la lavadora y comienzo de un programa, 28-29 Panel de control Pilotos Poner en marcha un programa Programas, 30 Tabla de programas Personalizaciones, 31 ECO8F 1292 Seleccionar la temperatura Seleccionar el centrifugado Funciones Detergentes y ropa, 32 Contenedor de detergentes Ciclo de blanqueo Preparar la ropa Pre
Instalación ES ! Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, verifique que permanezca junto con la lavadora para informar al nuevo propietario sobre el funcionamiento y brindar las correspondientes advertencias. ! Lea atentamente las instrucciones: ellas contienen importante información sobre la instalación, el uso y la seguridad.
Conexión del tubo de descarga 65 - 100 cm Conecte el tubo de descarga, sin plegarlo, a una tubería de descarga o a una descarga de pared colocadas a una altura del piso entre 65 y 100 cm; ! No utilice prolongaciones ni conexiones múltiples. ES ! El cable no debe estar plegado ni sufrir compresiones. ! El cable de alimentación debe ser sustituido sólo por técnicos autorizados. ¡Atención! La empresa fabricante declina toda responsabilidad en caso de que estas normas no sean respetadas.
Descripción de la lavadora y comienzo de un programa ES Panel de control PANTALLA Botón TEMPERATURA Botón y piloto de ENCENDIDO/ APAGADO Pilotos DE AVANCE DEL CICLO Piloto PUERTA BLOQUEADA Contenedor de detergentes Botón CENTRIFUGADO Mando de PROGRAMAS Botones con pilotos FUNCIÓN Botón con piloto PUESTA EN MARCHA/ PAUSA Botón y piloto de BLOQUEO DE BOTONES Contenedor de detergentes: para cargar detergentes y aditivos (ver “Detergentes y ropa”).
Pilotos Los pilotos suministran información importante. He aquí lo que nos dicen: Pilotos fase en curso Girando el mando PROGRAMAS, los pilotos se iluminarán indicando las fases que la máquina realizará según el programa elegido. Una vez seleccionado y puesto en marcha el ciclo de lavado deseado, las luces testigo se encenderán progresivamente para indicar su estado de avance: Pilotos de temperatura Seleccionando un valor de temperatura, el piloto correspondiente se iluminará.
Programas ES Programas Tabla de programas 5 Diario (programas para todos los días) Prelavado Algodón 90°C: blancos sumamente sucios. Algodón: blancos y colores resistentes muy sucios. Algodón (2): blancos y colores delicados poco sucios. Algodón de color (3): blancos poco sucios y colores delicados. Sintético: colores resistentes muy sucios. Sintético: colores resistentes poco sucios.
Personalizaciones Seleccionar la temperatura ES Presionando el botón TEMPERATURA se selecciona la temperatura de lavado (ver la Tabla de programas). La temperatura se puede disminuir hasta el lavado en frío ( ). La máquina impedirá automáticamente seleccionar una temperatura mayor que la máxima prevista para cada programa. Seleccionar el centrifugado Presionando el botón CENTRIFUGADO se selecciona la velocidad de centrifugado del programa seleccionado.
Detergentes y ropa ES Contenedor de detergentes ¿Cuánto pesa la ropa? El buen resultado del lavado depende también de la correcta dosificación del detergente: si se excede la cantidad, no se lava de manera más eficaz, sino que se contribuye a encostrar las partes internas de la lavadora y a contaminar el medio ambiente. 1 sábana 400/500 g 1 funda 150/200 g 1 mantel 400/500 g 1 albornoz 900/1200 g 1 toalla 150/250 g ! No use detergentes para el lavado a mano porque producen demasiada espuma.
Precauciones y consejos ! La lavadora fue proyectada y fabricada en conformidad con las normas internacionales de seguridad. Estas advertencias se suministran por razones de seguridad y deben ser leídas atentamente.
Mantenimiento y cuidados ES Interrumpir el agua y la corriente eléctrica • Cierre el grifo de agua después de cada lavado. De este modo se limita el desgaste de la instalación hidráulica de la lavadora y se elimina el peligro de pérdidas. Limpiar la bomba La lavadora posee una bomba autolimpiante que no necesita mantenimiento. Pero puede suceder que objetos pequeños (monedas, botones) caigan en la precámara que protege la bomba, situada en la parte inferior de la misma.
Anomalías y soluciones Puede suceder que la lavadora no funcione. Antes de llamar al Servicio de Asistencia Técnica (ver “Asistencia”),controle que no se trate de un problema de fácil solución utilizando la siguiente lista. ES Anomalías: Posibles causas / Solución: La lavadora no se enciende. • El enchufe no está introducido en la toma de corriente, o no hace contacto. • En la casa no hay corriente. El ciclo de lavado no comienza. • • • • • La puerta no está correctamente cerrada.
Asistencia ES Antes de llamar al Servicio de Asistencia Técnica: • Verifique si la anomalía la puede resolver Ud. solo (ver “Anomalías y soluciones”); • Vuelva a poner en marcha el programa para controlar si el inconveniente fue resuelto; • Si no es así, llame al Servicio de Asistencia técnica autorizado, al número de teléfono indicado en el certificado de garantía. ! No recurra nunca a técnicos no autorizados. Comunique: • el tipo de anomalía; • el modelo de la máquina (Mod.
Gebruiksaanwijzing WASAUTOMAAT Inhoud NL Nederlands NL Installatie, 38-39 Uitpakken en waterpas zetten Hydraulische en elektrische aansluitingen Eerste wascyclus Technische gegevens Beschrijving van de wasautomaat en starten van een programma, 40-41 Bedieningspaneel Controlelampjes Een programma starten Programma’s, 42 Programmatabel Persoonlijke instellingen, 43 ECO8F 1292 Instellen van de temperatuur Instellen van de centrifuge Functies Wasmiddelen en wasgoed, 44 Wasmiddelbakje Bleekcyclus Voorber
Installatie NL ! Het is belangrijk deze handleiding te bewaren voor latere raadpleging. In het geval u het apparaat verkoopt, of u verhuist, moet het boekje bij de wasautomaat blijven zodat de nieuwe gebruiker de functies en betreffende raadgevingen kan doornemen. Een correcte nivellering geeft de machine stabiliteit en voorkomt trillingen, lawaai en het zich verplaatsen van de automaat tijdens de werking.
Aansluiting van de afvoerbuis 65 - 100 cm Verbind de buis, zonder hem te buigen, aan een afvoerleiding of aan een afvoer in de muur tussen de 65 en 100 cm van de grond ! Het snoer mag niet gebogen of samengedrukt worden. ! De voedingskabel mag alleen door een bevoegde installateur worden vervangen. Belangrijk! De fabrikant kan niet aansprakelijk worden gesteld wanneer deze normen niet worden nageleefd.
Beschrijving van de wasautomaat en starten van een programma NL Bedieningspaneel Controlelampjes VOORTGANG CYCLUS DISPLAY Toets met controlelampje Controlelampje DEUR TEMPERATUURTOETS GEBLOKKEERD AAN/UIT Wasmiddelbakje CENTRIFUGETOETS Toetsen met controlelampjes FUNCTIE PROGRAMMAKNOP Toets met controlelampje START/PAUZE Toets met controlelampje TOETSBLOKKERING Wasmiddelbakje: voor wasmiddelen en wasversterkers (zie “Wasmiddelen en wasgoed”).
Controlelampjes De controlelampjes geven belangrijke informatie. Ze geven informatie over: Controlelampjes lopende fase Als u aan de PROGRAMMAKNOP draait gaan de controlelampjes aan van de fases die de wasautomaat uitvoert. Deze hangen af van het gekozen programma. Als u de gewenste wascyclus heeft geselecteerd en gestart gaan de controlelampjes één voor één aan om te tonen op welk punt de cyclus is: Controlelampje temperatuur Als u een temperatuur selecteert gaat het bijbehorende controlelampje aan.
Programma’s NL Programma’s Programmatabel Beschrijving van het Programma 11 Katoen 12 Synthetisch 13 Snelle was Delprogramma’s A Spoelen B Centrifugeren C Afpompen 90° 60° 40° 40° 60° 40° 1200 1200 1200 1200 800 800 - 8 8 8 8 4 4 30 800 - - 1,5 90° 60° 40° 40° 30° 40° 1200 1200 800 600 0 600 - - 8 8 4 2 2 2 Waterafvoer Waterafvoer Waterafvoer 1200 - - 8 800 - - 3 800 - - 3 - 1200 1200 0 - - -
Persoonlijke instellingen Instellen van de temperatuur NL De TEMPERATUURTOETS indrukken te draaien kunt u de wastemperatuur instellen (zie Programmatabel). De temperatuur kan verlaagd worden tot aan koud wassen ( ). De machine voorkomt dat u een temperatuur instelt die hoger is dan het maximum voorzien voor dat programma. Instellen van de centrifuge De CENTRIFUGETOETS indrukken. te draaien stelt u de snelheid van de centrifuge van het gekozen programma in.
Wasmiddelen en wasgoed NL Wasmiddelbakje Een goed wasresultaat hangt ook af van de juiste dosis wasmiddel: te veel wasmiddel maakt het wassen niet beter. Het wasmiddel blijft aan de binnenzijde van de wasautomaat zitten en zorgt voor het vervuilen van het milieu. ! Gebruik nooit wasmiddelen voor handwas aangezien die te veel schuim vormen.
Voorzorgsmaatregelen en advies ! De wasmachine is ontworpen en geproduceerd volgens de internationale veiligheidsnormen. Deze aanwijzingen zijn voor uw eigen veiligheid geschreven en moeten aandachtig worden doorgenomen.
Onderhoud en verzorging NL Afsluiten van water en stroom Reinigen van de pomp • Sluit na iedere wasbeurt de kraan af. Hiermee beperkt u slijtage van de waterinstallatie van de wasmachine en voorkomt u lekkage. De wasautomaat is voorzien van een zelfreinigende pomp en hoeft dus niet te worden onderhouden. Het kan echter gebeuren dat kleine voorwerpen (muntjes, knopen) in het voorvakje dat de pomp beschermt en zich aan de onderkant ervan bevindt, terechtkomen.
Storingen en oplossingen Het kan gebeuren dat de wasautomaat niet werkt. Voor u contact opneemt met de Servicedienst (zie “Service”)moet u controleren of het niet een storing betreft die u zelf makkelijk kunt verhelpen met behulp van de volgende lijst. Storingen: Mogelijke oorzaken / Oplossing: De wasautomaat gaat niet aan. • De stekker zit niet in het stopcontact of niet ver genoeg om contact te maken. • Het hele huis zit zonder stroom. De wascyclus start niet. • • • • • De deur zit niet goed dicht.
Service NL Voordat u de Servicedienst inschakelt: • Controleer eerst of u het probleem zelf kunt oplossen (zie “Storingen en oplossingen”). • Start het programma opnieuw om te controleren of de storing is verholpen; • Als dit niet het geval is moet u contact opnemen met de erkende Technische Servicedienst via het telefoonnummer dat op het garantiebewijs staat. ! Wendt u nooit tot een niet erkende installateur. Vermeld: • het type storing; • het model van de machine (Mod.); • het serienummer (S/N).
Instruções para utilização MÁQUINA DE LAVAR ROUPA Sumário PT Português PT Instalação, 50-51 Desembalar e nivelar Ligações hidráulicas e eléctricas Primeiro ciclo de lavagem Dados técnicos Descrição da máquina de lavar roupa e como iniciar um programa, 52-53 Painel de comandos Indicadores luminosos Iniciar um programa Programas, 54 Tabela dos programas Personalizações, 55 ECO8F 1292 Seleccione a temperatura Seleccione a centrifugação Funções Detergentes e roupa, 56 Gaveta dos detergentes Ciclo para b
Instalação PT ! É importante guardar este manual para poder consultá-lo a qualquer momento. Se a máquina for vendida, cedida ou transferida, certifique-se que este manual permaneça com a máquina para informar o novo proprietário acerca do seu funcionamento e das respectivas advertências. ! Leia com atenção estas instruções: há importantes informações acerca da instalação, da utilização e da segurança. Desembalar e nivelar Desembalar 1. Tire a máquina de lavar roupa da embalagem. 2.
Ligação do tubo de descarga 65 - 100 cm Ligue o tubo de descarga, sem dobrá-lo, a um conduto de descarga ou a uma descarga de parede colocados entre 65 e 100 cm do chão; ! Não empregue extensões nem fichas múltiplas. PT ! O cabo não deve ser dobrado nem apertado. ! O cabo de alimentação deve ser substituído somente por técnicos autorizados. Atenção! O fabricante declina toda a responsabilidade se estas regras não forem respeitadas.
Descrição da máquina de lavar roupa e como iniciar um programa Painel de comandos Indicadores LUMINOSOS DE AVANÇO DO CICLO PT VISOR Indicador luminoso Tecla Tecla e indicador luminoso TEMPERATURA LIGA/DESLIGA Gaveta dos detergentes Tecla CENTRIFUGAÇÃO Selector de PROGRAMAS PORTA BLOQUEADA Teclas com indicadores luminosos de Tecla com indicador luminoso INÍCIO/ PAUSA FUNÇÕES Tecla e indicador luminoso BLOQUEIO TECLAS Gaveta dos detergentes: para colocar detergentes e aditivos (veja “Deterge
Indicadores luminosos Os indicadores luminosos fornecem informações importantes. Vejamos o que significam: Indicadores luminosos fase em curso Girando o selector dos PROGRAMAS, os indicadores luminosos acendem-se indicando as fases que a máquina efectuará conforme o programa escolhido.
Programas PT Programas Tabela dos programas Descrição do Programa 11 Algodão 12 Sintéticos 13 Rápido 30’ Programas Parciais A Enxaguamentos B Centrifugação C Descarga Detergentes PréLavalavagem Lixívia gem Amaciador Carga Duração max.
Personalizações Seleccione a temperatura PT Pressionando a tecla TEMPERATURA para seleccionar a temperatura de lavagem (veja a Tabela dos programas). A temperatura pode ser diminuída até a lavagem a frio ( ). A máquina impedirá automaticamente a configuração de uma temperatura superior à máxima prevista para cada um dos programas. Seleccione a centrifugação Pressionando a tecla CENTRIFUGAÇÃO para seleccionar a velocidade de centrifugação do programa seleccionado.
Detergentes e roupa PT Gaveta dos detergentes O bom resultado da lavagem depende também do emprego da dose certa de detergente: com excessos não se lava de maneira mais eficaz, mas contribui-se para formar crostas nas peças internas da máquina de lavar roupa e poluir o meio ambiente. ! Não use detergentes para lavagem à mão, porque formam espuma demais.
Precauções e conselhos ! Esta máquina de lavar roupa foi projectada e fabricada em conformidade com os regulamentos internacionais de segurança. Estas advertências são fornecidas por razões de segurança e devem ser lidas com atenção. Os consumidores devem contactar as autoridades locais ou os pontos de venda para solicitar informação referente ao local apropriado onde devem depositar os electrodomésticos velhos.
Manutenção e cuidados PT Interromper a alimentação de água e de corrente eléctrica • Feche a torneira da água depois de cada lavagem. Desta maneira diminuiu-se o desgaste do sistema hidráulico da máquina de lavar roupa e elimina-se o risco de inundação. • Tire a ficha da tomada eléctrica quando for limpar a máquina de lavar roupa e durante os trabalhos de manutenção. Limpar a bomba Esta máquina de lavar roupa é equipada com uma bomba com limpeza automática que não precisa de operações de manutenção.
Anomalias e soluções Pode acontecer que a máquina de lavar roupa não funcione. Antes de telefonar para a Assistência Técnica (veja “Assistência”), verifique se não se trata de um problema fácil de resolver com ajuda da seguinte lista. PT Anomalias: Possíveis causas / Solução: A máquina de lavar roupa não liga. • A ficha não está colocada na tomada eléctrica, ou não o suficiente para haver contacto. • Em casa não há corrente. O ciclo de lavagem não inicia.
Assistência PT Antes de contactar a Assistência Técnica: • Verifique se consegue resolver a anomalia sozinho (veja “Anomalias e soluções”); • Reinicie o programa para verificar se o inconveniente foi resolvido; • Em caso negativo, contacte a o Centro de Assistência técnica autorizada no número de telefone indicado no certificado de garantia. ! Nunca recorra a técnicos não autorizados. Comunique: • o tipo de anomalia; • o modelo da máquina (Mod.); • o número de série (S/N).
Bedienungsanleitungen WASCHVOLLAUTOMAT INHALTSVERZEICHNIS DE Deutsch DE Installation, 62-63 Auspacken und Aufstellen Wasser- und Elektroanschlüsse Erster Waschgang Technische Daten Beschreibung des Waschvollautomaten und Starten eines Waschprogramms, 64-65 Bedienblende Kontrollleuchten Starten eines Waschprogramms Waschprogramme, 66 Programmtabelle Personalisierungen, 67 ECO8F 1292 Temperatureinstellung Schleudereinstellung Funktionen Waschmittel und Wäsche, 68 Waschmittelschublade Bleichen Vorsorti
Installation DE ! Es ist äußerst wichtig, diese Bedienungsanleitung sorgfältig aufzubewahren, um sie jederzeit zu Rate ziehen zu können. Sorgen Sie dafür, dass sie im Falle eines Umzugs oder einer Übergabe an einen anderen Benutzer das Gerät stets begleitet, damit auch der neue Inhaber die Möglichkeit hat, diese zu Rate zu ziehen. ! Lesen Sie die Hinweise bitte aufmerksam durch, sie liefern wichtige Informationen hinsichtlich der Installation, des Gebrauchs und der Sicherheit.
Anschluss des Ablaufschlauches 65 - 100 cm Schließen Sie den Ablaufschlauch ohne ihn dabei abzuknicken an einen geeigneten Abfluss an. Die Mindestablaufhöhe beträgt 65 - 100 cm (gemessen vom Boden), oder hängen Sie diesen mittels des Schlauchhalters gesichert in ein Becken oder Wanne ein; Befestigen Sie diesen mittels des mitgelieferten Schlauchhalters z.B. an einen Wasserhahn (siehe Abbildung). Das freie Ablaufschlauchende darf nicht unter Wasser positioniert werden.
Beschreibung des Waschvollautomaten und Starten eines Waschprogramms DE Bedienblende Kontrollleuchten DISPLAY PROGRAMMABLAUF Taste TEMPERATUREN Taste mit Kontrollleuchte Kontrollleuchte GERÄTETÜR GESPERRT EIN/AUS Waschmittelschublade Taste SCHLEUDERN Wählschalter Tasten mit Kontrollleuchten FUNKTIONEN Taste mit Kontrollleuchte START/ PAUSE PROGRAMME Taste mit Kontrollleuchte TASTENSPERRRE Waschmittelschublade: für Waschmittel und Zusätze (siehe „Waschmittel und Wäsche“).
Kontrollleuchten Die Kontrollleuchten liefern wichtige Hinweise. Sie signalisieren: Laufende Programmphase Wird der Wahlschalter PROGRAMME gedreht, leuchten die jeweiligen Kontrollleuchten auf und zeigen so die Programmphasen an, die das Gerät auf der Grundlage der Programmwahl durchführen wird. Wurde das Waschprogramm gewählt und gestartet, leuchten die Kontrollleuchten nach und nach auf, und zeigen so den jeweiligen Programmstand an.
Waschprogramme Programmtabelle Waschprogramme DE 1 3 4 4 5 6 6 Programme für die tägliche Wäsche Baumwolle + Vorwasche 90°C: stark verschmutzte Weiß- und farbechte Buntwäsche. Baumwolle: stark verschmutzte Weiß- und farbechte Buntwäsche. Baumwolle (2): leicht verschmutzte Weiß- und empfindliche Buntwäsche. Baumwolle-Buntwäsche (3): leicht verschmutzte Weißwäsche und empfindliche Buntwäsche. Synthetik: stark verschmutzte, farbechte Buntwäsche. Synthetik: leicht verschmutzte farbechte Buntwäsche.
Personalisierungen Temperatureinstellung Durch Drücken der Taste „TEMPERATUREN“, um die Waschtemperatur einzustellen (siehe Programmtabelle). Die Temperatur kann bis auf Kaltwäsche ( ) herabgesetzt werden. Der Waschvollautomat verhindert automatisch die Einstellung einer höheren Schleuderstufe, sollte diese die für das jeweilige Programm vorgeschriebene Höchstgeschwindigkeit übersteigen.
Waschmittel und Wäsche DE Waschmittel und Wäsche Ein gutes Waschergebnis hängt auch von einer korrekten Waschmitteldosierung ab: Eine zu hohe Dosierung bedeutet nicht unbedingt reinere Wäsche, sie trägt nur dazu bei, die Maschineninnenteile zu verkrusten und die Umwelt zu belasten. ! Verwenden Sie keine Handwaschmittel, sie verursachen eine zu hohe Schaumbildung.
Vorsichtsmaßregeln und Hinweise ! Der Waschvollautomat wurde nach den strengsten internationalen Sicherheitsvorschriften entworfen und gebaut. Nachstehende Hinweise werden aus Sicherheitsgründen geliefert und sollten aufmerksam gelesen werden.
Reinigung und Pflege DE Abstellen der Wasser- und Stromversorgung • Drehen Sie den Wasserhahn nach jedem Waschvorgang zu. Hierdurch wird der Verschleiß der Wasseranlage verringert und Wasserlecks vorgebeugt. • Ziehen Sie den Netzstecker aus der Steckdose, bevor Sie Ihren Waschvollautomaten reinigen. Reinigung des Gerätes Die Gehäuseteile und die Teile aus Gummi können mit einem mit warmer Spülmittellauge angefeuchteten Tuch gereinigt werden.
Störungen und Abhilfe Bei Funktionsstörung: Bevor Sie sich an den Technischen Kundendienst wenden (siehe „Kundendienst“), vergewissern Sie sich zuerst, ob es sich nicht um eine Kleinigkeit handelt, die Sie selbst beheben können. Ziehen Sie hierzu nachstehendes Verzeichnis zu Rate. DE Störungen: Mögliche Ursachen / Lösungen: Der Waschvollautomat schaltet sich nicht ein. • Der Stecker steckt nicht in der Steckdose, oder nicht so, dass der Kontakt hergestellt wird. • Der Strom ist ausgefallen.
Kundendienst 195087566.00 09/2010 - Xerox Fabriano DE Bevor Sie sich an den Kundendienst wenden: • Sollten einige Kontrollen vorab selbst durchgeführt werden (siehe „Störungen und Abhilfe“); • Starten Sie daraufhin das Programm erneut, um sicherzustellen, dass die Störung auch wirklich behoben wurde; • Ist dies nicht der Fall, dann kontaktieren Sie den autorisierten Kundendienst unter der auf dem Garantieschein befindlichen Telefonnummer.