Troubleshooting guide

19
FLUSH LOOK MODELS
Factory Installed Flush Look Trim Package
A FLUSH LOOK (BUILT-IN) model can be purchased with factory
installed perimeter molding around the doors. This molding extends
beyond the top of the door to hide the top hinges and is designed to
accommodate custom panels for both the refrigerator and freezer
doors.
These models have a modified top hinge to allow the door to open
fully with the perimeter molding in place.
A perimeter kit
(Fig. 31) is supplied with these models that can be
attached to the front edge of the refrigerator cabinet to fill any possible gaps up to 3/4" on
the sides and top of the unit.
Fig. 30
TOP
PERIMETER
MOLDING
Adapting Free Standing Models
Free Standing models can be adapted to have a similar appearance to factory-built Flush Look
models. The custom panel molding kit for the refrigerator and freezer doors can be ordered separately
and installed on the unit. These moldings do not extend beyond the top of the door. Therefore the
hinges will be visible.
SIDE
PERIMETER
MOLDING
Fig. 31
Fig. 28
Fig. 29
CUT OUT FOR
DOOR
TRIM
HINGE
COVER
HINGE