Specifications
23
Copyright© by AOS 2015. All rights reserved.
In order for a Series 100 Flame Guard® water heater to
operate, the pilot must be lit. The heat from the pilot
ame creates an
electrical current in the thermopile. The
thermopile generates the power needed to operate the
electronic gas control without requiring an external power
source.
The electronic gas control incorporates an LED status
indicator with advanced self diagnosc features. The elec-
tronic Gas Valve monitors the operaon of the heater and
will ash an error code if it idenes an issue.
A temperature limit switch or ECO (Energy Cut O) sensor
located in the gas control valve is used to shut o the
water heater if the water temperature exceeds 189°F
(87°C) for 155°F models or 199°F (93°C) for 180°F models.
Gas Water Heater Operation
Insucient combuson air supply or blocked venlaon
can also acvate the thermal cuto switch. When these
condions have been corrected, the thermal switch can
be reset.