Installation

5019 610 56085

Attention: When carrying out the following

operations it is advisable to wear protective gloves.

These instructions should be carefully followed

both to prevent injury and in order not to damage

the oven door and hinges.

How to remove the oven door:

1. Open the oven door fully

(see fig. 1).

2. Lift the two catches and push them forwards as far

as they go (see fig. 2).

3. Remove the door by closing it partially and pulling it

upwards (see fig. 3).

To remove the oven door:

1. Place the oven door on a horizontal surface (fig. 1).

2. Unscrew the 2 glass support screws

(A)

(fig. 1, fig.

2).

3. Lift the bottom of the first sheet of glass and remove

it (fig. 3).

4. Remove the second sheet of glass (depending on the

model) (fig. 4).

5. Refit the sheets of glass in reverse order making sure

that:

- The word SAFEGLASS on the second sheet is

legible (if provided, fig.4).

- The word SAFEGLASS on the last sheet is facing

upwards.

Pay attention to the hinges when cleaning and/or

removing the door (fig. 6).

To remount the door:

1. Insert the hinges into their grooves and lower the

door fully.

2. Lower the two catches.

3. Close the oven door fully.