Specifications
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
..call your
If Refrigerator
COOL-LINE * Section is
service
TOO COLD
assistance
telephone
If ICE isn’t
number
MADE FAST ENOUGH
(page 161.
If BOTH SECTIONS
are TOO WARM
Power Saving Control...
REFRIGERATOR
INDICATOR
LIGHT
POWER SAVING CONTROL
LIGHT SWITCH FREEZE
Setting the controls...
Controls forthe refrigerator and freezer are In the
Give the refrigerator time to cool down com-
refrigerator. When the refrigerator is plugged in for
the first time...
1. Set the REFRIGERA-
These settings
should be about right for nor-
TOR CONTROL TO 4.
mal household refrigerator usage.
2. Set the FREEZER
The controls will be set about right when milk or
and turn the knob.
Refrigerator Control adjustments range from 1 to
8. Freezer Control adjustments range from A to D.
Changing the control settings...
l
Adjust the Refrigerator Control first
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount ot food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Heavy ice usage
Very cold room temperature
(can’t cycle often enough]
Refrigerator
Freezer
Door opened often
Large amount of food added
Refrigerator
Freezer
Very warm or very cold
room temperatures
1. Use the “CONSUMES LESS ENERGY” setting when
The Power Saving Control on the Control Con-
humidity is low.
sole operates electric heaters around the door
2. Use the “REDUCES EXTERIOR MOISTURE” setting if
openings. These heaters help keep morsture from
moisture forms on the outside of the refrigerator.
forming on the outside of the refrigerator
The indicator light will glow when the switch is in
POWEP SAVING CONTPOL
the “REDUCES EXTERIOR MOISTURE” positron.