Corporation Electric Range Use and Care Guide

The oven light
The oven light will come on when you
push the Oven Light Switch on the
control panel. Push the switch again to
turn off the light,
Electrical Shock and Personal
Injury Hazard
. Make sure oven and light bulb are
cool and power to the oven has
been turned off before replacing
the light bulb. Failure to do so
could result in electrical shock or
burns.
. The bulb cover must be in place
when using the oven. The cover
protects the bulb from breaking,
and from high oven temperatures.
Since bulb cover is made of glass,
be careful not to drop it. Broken
glass could cause injury.
To replace the oven light:
1. Unplug appliance or disconnect at
the main power supply.
2. Remove the glass bulb cover in the
back of the oven by screwing it out
counterclockwise.
3. Remove the light bulb from its
socket. Replace with a 40-watt
appliance bulb.
4. Replace the bulb cover by screwing
it in clockwise. Plug in appliance or
reconnect at the main power
supply.
NOTE: Make sure oven light is off during
the Self-Cleaning cycle. Keeping oven
light on will shorten bulb life.
Page 14