Operating Instructions REFRIGERATOR/FREEZER COMBINATION Contents GB English Installation, 2-3 Positioning and connection Reversible doors Description of the appliance, 4-5 Control panel Overall view Start-up and use, 6-7-8-9-10 Starting the appliance Navigating the display Chiller system Evwer Fresh Using the refrigerator to its full potential Using the freezer to its full potential FF200DP FF200DX Maintenance and care, 11 Switching the appliance off Cleaning the appliance Avoiding mould and unpleas
Installation GB ! Before operating your new appliance, please read these operating instructions carefully. They contain important information for safe use, installation and care of the appliance. Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
Fitting a new plug Reversible doors IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... If it is necessary to change the direction in which the doors open, please contact the Technical Assistance Centre.
Description of the appliance GB Control panel ON/OFF ALARM RESET STANDBY (display energy saving mode) REFRIGERATOR temperature adjustment REFRIGERATOR display ALARM FREEZER display FREEZER temperature adjustment HOLIDAY SUPER COOL COOL CARE ZONE EVER FRESH I CARE ON/OFF The entire product (both the refrigerator and freezer compartments) may be switched on by pressing this button. The red LED indicates that the product is switched off, while the green LED shows that it is operating.
Overall view GB The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.
Start-up and use GB Starting the appliance ! After transportation of the appliance, carefully place it in an upright position and wait at least 3 hours before connecting it to the electricity mains, to make sure it operates as it should. Clean the inside of the refrigerator well using warm water and bicarbonate of soda before placing food inside it. The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on.
Chiller system No Frost The electronic cooling system No Frost is characterised by the presence of aeration cells on the upper walls of the refrigerator compartment. The No Frost system, thanks to the presence of a number of aeration cells, enables the constant circulation of air inside the compartment, while the internal temperature of the refrigerator is kept even using the same compartment ventilation system.
GB 7. Once the air suction phase has been completed, the Ever Fresh LED switches off automatically. 8. Unlock the container from its position by pressing the button on the shelf. D E C 9. Take it out of the refrigerator and turn the knob clockwise to the CLOSE position to avoid accidental opening (see figure A). The absence of air inside the container is indicated by the valve at the bottom (see figure D). 10.
1 2 SHELVES: with or without grill. Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. Using the freezer to its full potential The Cool Care Zone is a special compartment inside the freezer which allows the user to select any of the 4 different operating modes in accordance with specific requirements and the type of food stored inside.
GB ICE CARE tray The fact that they are situated on the top part of the freezer drawers ensures greater cleanliness: the ice no longer comes into contact with the food placed inside the freezer compartment; furthermore, the dripping of the water during filling is avoided (a lid to cover up the hole after filling with water is also provided). 1. Pull out the tray by pushing it up. Check that the tray is ompletely empty and fill it with water through the opening provided. 2.
Maintenance and care Switching the appliance off Replacing the light bulb During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (15W or 25W). 1.
Precautions and tips GB ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments; - 2002/96/CE..
Troubleshooting Malfunctions: Possible causes / Solutions: GB The display is completely switched off. The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The motor does not start. The appliance comes with a motor protection control (see Start-up and use). The display is on but it is dim. Pull out and reverse the plug before putting it back in the socket.
Guarantee GB 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.
After Sales Service GB No one is better placed to care for your Hotpoint appliance during the course of its working life than us the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08709 066 066 Republic of Ireland: 0818 313 413 www.hotpointservice.co.
195075923.