User Manual Model : FFCR80120
3 2
USER MANUAL EN INDEX USER MANUAL 3 HEALTH & SAFETY GUIDE Safety Instructions Product description Detergent dispenser Technical data for water connection Control panel Programmes Options & Functions Programme chart Door Accessories How to use the appliance First time use Daily use Display Indicators Hints and tips Cleaning & maintenance Cleaning the outside of the washing machine Checking the water supply hose Cleaning the mesh filters in the water supply hose Cleaning the detergent dispenser Cleaning th
Health & Safety guide SAFETY INSTRUCTIONS Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls. Very young children (0-3 years) should be kept away from the appliance.
EN Health & Safety guide Use only new hoses to connect the appliance to the water supply. The old hose-sets should not be reused. The supply water pressure must be in the 0.1-1 Mpa range. ELECTRICAL WARNINGS It must be possible to disconnect the appliance from the power supply by unplugging it if plug is accessible, or by a multi-pole switch installed upstream of the socket in accordance with the wiring rules and the appliance must be earthed in conformity with national electrical safety standards.
User manual PRODUCT DESCRIPTION 1. Worktop 2. Detergent dispenser 3. Control panel 4. Door handle 5. Door 6. Water filter - behind plinth 7. Plinth (removable) 8. Adjustable feet (4) DETERGENT DISPENSER 1. Main wash compartment • Detergent for the main wash • Stain remover • Water softener • For a liquid detergent it is recommended to use removable plastic partition A (supplied) for a proper dosage. If powder detergent is used, place the partition into slot B. 2.
EN User manual CONTROL PANEL 1. “ON/OFF” button 2. Programme selector 3. “Start/Pause” button 4. “Spin” button 5. “Intensive rinse” button 6. “Clean+” button 7. “Start delay” button 8. “FreshCare+” / “Key lock“button 9. “Temperature” button“ PROGRAMMES For choosing the appropriate programme for your kind of laundry, always respect the instructions on the care labels of the laundry. The value given in the tub symbol is the maximum temperature possible for washing the garment.
User manual OPTIONS ! If the selected function is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps). ! If the selected function is incompatible with another previously set function the function will not be enabled.
EN User manual PROGRAMME CHART Cotton - Test wash cycles in compliance with regulations 1061/2010 These are the reference programs for the energy label. Set this wash cycles with a temperature of 40°C or 60°C. They are the most efficient programmes in terms of energy and water consumption for washing normally soiled cotton laundry. The actual water temperature may differ from the declared one. This data may differ in your home due to changing conditions in inlet water temperature, water pressure etc.
User manual HOW TO USE THE APPLIANCE FIRST TIME USE Remove any manufacturing debris: • Select the “Cotton” programme at a temperature of 60°C. • Pour a small quantity of detergent powder into the main wash compartment  of the detergent dispenser (maximum 1/3 of the quantity the detergent manufacturer recommends for lightly soiled laundry). • Start the programme without adding any laundry (with empty drum). • See section “DAILY USE” for more information on how to select and start a programme.
User manual 5. Add detergent Pull out the detergent dispenser and add detergent (and additives / softener) into the relative compartments as described in section “DETERGENT DISPENSER”. Observe the dosing recommendations on the detergent pack. Correct dosing of detergent / additives is important, because: • it optimizes the cleaning result. • it avoids irritating residues of surplus detergent in your laundry. • it saves money by avoiding waste of surplus detergent.
User manual DISPLAY INDICATORS Door locked This indicator will light up • after you have started a programme • the porthole door is locked FreshCare+ This indicator will light up • after you press Freshcare+ button Start delay This indicator will light up • after you press Start delay button Key lock This indicator will light up • after you press Key lock button Washing phase indicator This indicator shows the current programme phase, running from left to right through wash, rinse and drain.
EN User manual CLEANING & MAINTENANCE For any cleaning and maintenance, switch off and unplug the washing machine. Do not use flammable fluids o clean the washing machine. CLEANING THE OUTSIDE OF THE WASHING MACHINE Use a soft damp cloth to clean the outer parts of the washing machine. Do not use glass or general purpose cleaners, scouring powder or similar to clean the control panel - these substances might damage the printing.
User manual CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE 1. Close water tap and unscrew the inlet hose. 3. Now unscrew the inlet hose on the back of the washing machine by hand. Pull out the mesh filter from the valve on the back of the washing machine with pliers and carefully clean it. 2. Clean the mesh filter at the hose’s end carefully with a fine brush. 4. Insert the mesh filter again. Connect the inlet hose to water tap and washing machine again. Do not use a tool to connect the inlet hose.
EN User manual CLEANING THE WATER FILTER / DRAINING RESIDUAL WATER Switch off and unplug the washing machine before cleaning the water filter or draining residual water. If you used a hot wash programme, wait until the water has cooled down before draining any water. Clean the water filter regularly, to avoid that the water cannot drain after the wash due to obstruction of the filter. If the water cannot drain, the display indicates that that the water filter may be clogged. 6.
User manual TROUBLESHOOTING Your washing machine is equipped with various automatic safety and feedback functions. They enable failures and needed maintenance to be detected and indicated accordingly. These failures are frequently so minor that they can be removed within a few minutes. Anomalies: Possible causes / Solution: The washing machine does not turn on. • The plug is not inserted into the electrical outlet, or not enough to make contact. • There has been a power failure.
User manual EN TRANSPORT AND HANDLING Never lift the washing machine by holding it at the worktop. 1. Pull out the mains plug, and close the water tap. 2. Make sure that door and detergent dispenser are properly closed. 3. Disconnect the inlet hose from the water tap, and remove the drain hose from your draining point. Remove all rest water from the hoses, and fix them so that they cannot get damaged during transport. 4. Refit the transport bolts.
User manual AFTER-SALES SERVICE BEFORE CALLING THE AFTER-SALES SERVICE 1. See if you can solve the problem by yourself with the help 2. Switch the appliance off and back on again to see if IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN TOUCH WITH THE NEAREST AFTERSALES SERVICE • the service number (number after the word Service on the rating plate). the fault persists. of the suggestions given in the TROUBLESHOOTING.
EN Installation guide x1 17 mm - 0.67 inch x1 12 mm - 0.
Installation guide max 2,0 cm max 0,8 inch max 100cm / 39 inch min 60cm / 24 inch B 8,2 f e et A ma x 2 , 5 m / max 100cm / 39 inch min 60cm / 24 inch x4 E2 n n
859991541490
