Health & Safety and Installation guide
EN ENGLISH Health and Safety guide Installation guide 2 3 6
SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED Before using the appliance read these safety instructions. Keep them nearby close at hand for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inapropriate use of the appliance or incorrect setting of controls. complete ventilation of the room).
ELECTRICAL WARNINGS For installation to comply with current safety regulations, an omnipolar switch with minimum contact gap of 3 mm is required and the appliance must be earthed. If the power cable is damaged, replace with an identical one. The power cable must only be replaced by a qualified technician in compliance with the manufacturer instruction and current safety regulations. Contact an authorized service center.
EN SAFEGUARDING THE ENVIRONMENT DISPOSAL OF PACKAGING MATERIALS The packaging material is 100% recyclable and is marked with the recycle symbol . The various parts of the packaging must therefore be disposed of responsibility and in full compliance with local authority regulations governing waste disposal.
x2 90°C 6
EN 20 mm 345 mm 540 mm 95 mm 482 mm 595 mm 537 mm 89° max 5,5 mm 572 mm 10 mm 595 mm 538 mm min 550 mm 600 mm min 550 mm min 560 mm 5 mm 583 + 2 mm min 560 mm 7
= 001 8 = 4 0 0 010 9 0 0 939 Printed in Italy