Setup and user guide

4
See Use and Care Guide for more details on functions / see
last page for information on how to obtain the Use and
Care Guide
1. LOAD LAUNDRY
• Prepare your laundry according to the
recommendations in section “HINTS AND TIPS”.
• Make sure that fasteners are closed and ribbons tied
together.
• Open the door and load the laundry.
Observe the maximum load sizes given in the
programme chart
2. CLOSE DOOR
• Make sure that no laundry gets stuck
between door glass and rubber seal.
• Close the door so that you can hear it
click shut.
3. OPEN THE WATER TAP
• Make sure that the washing machine is
connected to the mains.
• Open the water tap
4. SWITCH ON WASHING MACHINE
• Press the On/O button. An animation appears,
and there is a sound. The programme which was
used last lights up. Afterwards the washing
machine is ready to be operated.
5. SET THE DESIRED PROGRAMME
• Select programme:
Press the programme symbol on the control panel.
Programme name, default duration, temperature and
spin speed as well as maximum laundry load appear on
the display.
• Change temperature, if needed
Press the temperature button; the display
indicates that the temperature can be set.
• Press the temperature button repeatedly
OR
• press the UP or DOWN key until the needed
temperature appears on the display.
• Change spin speed, if needed
Press the Spin button; the display indicates that
the spin speed can be set.
• Press the Spin button repeatedly
OR
• press the UP or DOWN key until the needed spin
speed, or Rinse hold, appears on the display.
• Select options, if needed
Press the options button. The options which are
selectable for the programme appear on the
display.
Press the UP or DOWN key to navigate through the list of
options. Press the OK key to select an option; the option
symbol lights up on the control panel.
To deselect a selected option, press the OK key again.
Some options / functions can be selected by directly
pressing the button:
1 2
If such an option is not selectable for the programme, it
switches o automatically when the button is pressed.
Refer to section OPTIONS, FUNCTIONS AND INDICATORS
for more information.
6. ADD DETERGENT
• If you want to add the detergent manually,
carefully pull out the detergent dispenser and
add detergent (and additives) now, as indicated
in section DETERGENT DISPENSER.
Do not pull hard when opening the dispenser.
Observe the dosing recommendations on the
detergent pack. If you have selected PREWASH or
FINISH IN, observe the instructions in section
PROGRAMMES AND OPTIONS, and FUNCTIONS.
Afterwards carefully close the detergent dispenser.
• If you want the washing machine to dose the
detergent automatically, simply make sure the Auto
Dosing function is activated (refer to section OPTIONS,
FUNCTIONS AND INDICATORS / Auto dosing). The
detergent is added by the auto dosing system after
programme start.
7. START PROGRAMME
• Press and hold “Start/Pause” until the button
lights up solidly; the programme starts.
• If you have selected Auto dosing, the display
indicates dispensing of the detergent after programme
start. Observe the instructions in section OPTIONS,
FUNCTIONS AND INDICATORS / Auto dosing function.
8. CHANGE A RUNNING PROGRAMME, IF
NEEDED
You can still change the settings while a programme is
running. The changes will be applied, provided the
respective programme phase has not nished yet.
• Press the relevant button (for example the “Spin
speed” button to change the spin speed). The display
indicates that the value can be set.
• Press the UP or DOWN key to adjust the value. For
options selectable with the options button: press UP or
DOWN key to select an option; afterwards press the OK
key to conrm or deselect the option.
The programme will continue automatically.
To change the settings of a running programme, you can
also
• Press “Start/Pause” to pause the running programme
• Change your settings
• Press “Start/Pause” again to continue the programme.
9. PAUSE A RUNNING PROGRAMME AND OPEN
THE DOOR, IF NEEDED
• Press and hold “Start/Pause” to pause a running
programme.
• Provided water level is not too high, or laundry is
not too hot, the door indicator lights up. You
can open the door, for example to add/remove
laundry.
DAILY USE