Setup and user guide

EN
3
See the section on DAILY USE for information on how to select and start
a programme.
FIRST CYCLE
If you plug in the washing machine, it will switch on automatically.
You will be asked to set the desired display language.
Press the UP or DOWN key to select the desired language,
afterwards conrm by pressing the OK key.
Afterwards adjust the washing machine to your local water
hardness (select soft, medium or hard), and determine if you want
to use softener or detergent for Tank 2 of the detergent dispenser
(auto dosing system).
To remove any residues from the manufacturing process:
• Select the “Cotton” programme at a temperature of 95°C
• Add a small amount of heavy duty detergent to the
manual dosing compartment of the detergent
dispenser (maximum 1/3 of the quantity recommended
by the detergent manufacturer for lightly soiled
laundry) and press the Auto dosing buttons - the light of these
buttons must be o.
• Start the programme without adding any laundry.
AUTO DOSING FUNCTION
The detergent dispenser of the washing machine is equipped with a
two tanks system for the automatic dispensing of liquid detergent
and softener.
Before using this function, follow the instructions in the USE AND
CARE GUIDE/AUTO DOSING – FIRST USE to:
1. Set the correct water hardness level
2. Set tank 2 content. By default, Tank 1 is set for a detergent (your
main detergent), and Tank 2 is set for fabric softener. If you do not use
fabric softener, set Tank 2 for another detergent.
3. Check/adjust the preset dosing quantities.
By default, the system comes with the following dosing values:
• 80 ml detergent for Tank 1
• 30 ml softener for Tank 2
You need to adjust these preset dosing values to the dosing values
reported on the detergent and softener package that you intend to
use.
After the Auto Dosing function is set for use, ll the tanks with the
appropriate content and install the labels on the tanks accordingly, as
explained in the USE AND CARE GUIDE / AUTO DOSING – FIRST USE.
FIRST TIME USE
6th SENSE LIVE FEATURE
Find detailed information on how to use the 6th Sense Live feature in
the 6th Sense Live app or in the Use & Care guide.
Thanks to the 6th Sense Live feature, your appliance can be
connected to the Internet.
Using the 6th Sense Live app on your smartphone / tablet, you can:
• monitor the status of the appliance
• get informed on the programme status
• set and start a programme
• change, modify, or reset a running programme
• access additional contents
Technical requirements:
• A wireless router 2.4Ghz WiFi b/g/n connected to the Internet.
Please note that the appliance has to be installed in a place well
covered by your wireless network (good signal strength).
• For Android users: a smart phone running Android 4.3 (or higher)
with a 1280x720 screen resolution (or higher).
• For iOS users: a smart phone or a tablet running iOS 8 (or higher).
To use the 6th Sense Live feature:
• Download the 6th Sense Live app from your App Store and install
it on your smartphone / tablet. The app provides the Terms of Use
(legal terms), which require your acceptance in order to use the
6th Sense Live feature.
• Register your washing machine using the application and connect
it to your home wireless network.