Setup and user guide

ManualsBrandsWhirlpool ManualsDomestic AppliancesFSCR80433

PRODUCT DESCRIPTION

Before using the appliance, carefully

read the Health and Safety and Use and

Care guides.

DAILY REFERENCE

GUIDE

CONTROL PANEL

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter/emergency

drain hose

(if available) - behind

plinth -

7. Plinth (removable)

8. Adjustable feet (4)

APPLIANCE

Before using the machine, the

transport bolts must be removed.

For more detailed instructions on how to

remove them, see the Installation Guide.

1. On/O button

(Reset/Drain if pressed

and held down)

2. Programme button

3. Colours 15° button

4. Fresh Care button

5. Dosing Aid button

6. Knob (Turn to select/

Press to conrm)

7. Finish in button

8. Temperature button

9. Spin Speed button

10. Options button

(Key lock if pressed and

held down)

11. Start / Pause button

12. Display

13. Programmes area

30’

40°

60°

MAX

1. 7.2.

6. 8.4. 10.3. 9.5. 11.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your appliance on www.whirlpool.eu/register

Summary of content (8 pages)

PAGE 1
EN DAILY REFERENCE GUIDE THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on www.whirlpool.eu/register Before using the appliance, carefully read the Health and Safety and Use and Care guides. Before using the machine, the transport bolts must be removed. For more detailed instructions on how to remove them, see the Installation Guide. PRODUCT DESCRIPTION 1. APPLIANCE 2. 1. Worktop 2. Detergent dispenser 3. Control panel 4.
PAGE 2
DETERGENT DISPENSER 1. Main wash compartment • Detergent for the main wash • Stain remover • Water softener 2. Prewash compartment • Detergent for the prewash. 3. Softener compartment • Fabric softener • Liquid starch Pour in softener or starch solution only up to the “max” mark. 4. Release button (Press to remove the detergent dispenser for cleaning).
PAGE 3
4. SWITCH ON WASHING MACHINE • Press the On/Off button until the programme button lights up. An animation appears, and there is a sound. Afterwards the washing machine is ready to be operated. 5. SET THE DESIRED PROGRAMME GUIDED MODE - the button light guides you through setting your programme in the following order: selection of programme / temperature / spin speed / options. As soon as you confirm a selection by pressing the knob, the button light will jump to the next step.
PAGE 4
SETTINGS The following settings can be changed / selected: Display language / key tones / cycle end alert/ display contrast / water hardness / dosing aid (adjust dosing amounts for the detergents you use) / eco mode (automatic switch-off function after programme end) / return to factory settings. • Press and hold the Programme button for at least 3 seconds. • Turn the knob to select the setting which you want to change; confirm it by pressing the knob.
PAGE 5
EN Cold/95°C max MIXED Cold/60°C 4.0 SYNTHETICS Cold/60°C 3.0 — DELICATES Cold/40°C 1.5 — — — — 1000 WOOL Cold/40°C 1.0 — — — — 1000 COLOURS Cold/60°C 4.0 — 1000 Cold/30°C 3.0 — — — — RINSE&SPIN — max — — — — SPIN — max — — — — DRAIN — max — — — SHIRTS Cold/40°C 1.5 — — DUVET Cold/60°C 3.0 — 1000 BED LINEN Cold/60°C 3.5 — max CASHMERE Cold/30°C 1.0 SPORT Cold/40°C 3.0 JEANS Cold/60°C 4.0 1000 BABY ITEMS Cold/60°C 4.
PAGE 6
PROGRAMMES Observe the recommendations on the care labels of your laundry. ECO COTTON Normally soiled cotton laundry. At 40°C and 60°C standard cotton programme and most favourable programme in terms of combined water and energy consumption for washing cotton laundry. The values on the Energy label are based on this programme COTTON Normally to heavily soiled and robust cotton and linen laundry, such as towels, underwear, table linen etc.
PAGE 7
EN OPTIONS which are selectable by pressing the Options button Prewash Helps to clean heavily soiled laundry by adding a prewash phase to the wash programme selected. Extends the programme by about 20 minutes. Add detergent to the prewash compartment of the detergent dispenser as well, or directly into the drum. Use powder detergent for the main wash in order to ensure that the detergent stays in the detergent dispenser until the start of the main wash phase.
PAGE 8
MAINTENANCE AND CLEANING AND TROUBLESHOOTING For maintenance and cleaning, and for troubleshooting, see the Use and Care Guide. CONTACTING AFTER-SALES SERVICE Provide both numbers shown on the service sticker inside the door when contacting the After-Sales Service team. http://www.whirlpool.com The phone number can be found in the warranty booklet.