User Manual www.whirlpool.
USER MANUAL THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on www.whirlpool.eu/register INDEX HEALTH & SAFETY GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EN Health & Safety guide SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls.
Health & Safety guide Use only new hoses to connect the appliance to DISPOSAL OF PACKAGING MATERIALS packaging material is 100% recyclable and is marked with the recycle the water supply. The old hose-sets should not be The symbol . The various parts of the packaging must therefore be disposed of reused. and in full compliance with local authority regulations The supply water pressure must be in the responsibly governing waste disposal. 01-1 Mpa range.
EN User manual PRODUCT DESCRIPTION 1. 2. 3. 4. 5. 1. Worktop 2. Detergent dispenser 3. Control panel 4. Door handle 5. Door 6. Water filter - behind plinth 6. 7. 7. Plinth (removable) 8. Adjustable feet (4) 8. DETERGENT DISPENSER B A 1. Main wash compartment • Detergent for the main wash • Stain remover • Water softener • For a liquid detergent it is recommended to use removable plastic partition A (supplied) for a proper dosage.
User manual CONTROL PANEL 7. 8. 1. “ON/OFF” button 7. 2. Programme selector 3. “Temperature” button 4. “Spin” button 5. “Start delay” button 6. “Start/Pause” button 7. Option buttons 1. 2. 3. 4. 5. 6. 8. “Key lock“button PROGRAMMES For choosing the appropriate programme for your kind of laundry, always respect the instructions on the care labels of the laundry. The value given in the tub symbol is the maximum temperature possible for washing the garment.
EN User manual OPTIONS ! If the selected option is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps) and the wording “No Selection” will appear on the display. ! If the selected option is incompatible with another previously set option, the wording “No Selection” will appear on the display and the option will not be enabled.
User manual PROGRAMME CHART Energy consumption kWh Total water lt Recommended detergent Residual dampness % * Max load 9 Kg Power consumption in off-mode 0.5 W / in left-on mode 8.0 W Mixed 40°C - 40°C 1000 4.5 ** – – – – – White 60°C - 90°C 1200 9.0 ** (90°) – – – Cotton 40°C - 60°C 1200 9.0 255 – 53 1.10 104 Cotton 60°C 60°C 1200 9.0 260 – 53 0.71 57.5 40°C 1200 9.0 255 – 53 1.
EN User manual HOW TO USE THE APPLIANCE FIRST TIME USE The first time the machine is switched on, you will be asked to select the language and the display will automatically show the language selection menu. To select the desired language press the “Temperature” button or “Start delay” button. To confirm the selection press the “Spin” button.
User manual 5. Add detergent Pull out the detergent dispenser and add detergent (and additives/softener) into the relative compartments as described in section “DETERGENT DISPENSER”. Observe the dosing recommendations on the detergent pack.
EN User manual INDICATORS Door can be opened Descaling Failure This indicator will light • before you have started a programme • when you have paused a programme and the water level is not too high, or the laundry is not too hot in that programme phase • when a programme is finished and the laundry can be unloaded A message on the display will regularly (roughly every 50 cycles) advise the user to run an automatic cleaning cycle to clean the washing machine and combat limescale build-up and bad odours.
User manual CLEANING & MAINTENANCE For any cleaning and maintenance, switch off and unplug the washing machine. Do not use flammable fluids to clean the washing machine. CLEANING THE OUTSIDE OF THE WASHING MACHINE Use a soft damp cloth to clean the outer parts of the washing machine. Do not use glass or general purpose cleaners, scouring powder or similar to clean the control panel – these substances might damage the printing.
EN User manual CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE 1. Close water tap and unscrew the inlet hose. 1 3. Now unscrew the inlet hose on the back of the washing machine by hand. Pull out the mesh filter from the valve on the back of the washing machine with pliers and carefully clean it. 2 2. Clean the mesh filter at the hose’s end carefully with a fine brush. 4. Insert the mesh filter again. Connect the inlet hose to water tap and washing machine again.
User manual CLEANING THE WATER FILTER / DRAINING RESIDUAL WATER Switch off and unplug the washing machine before cleaning the water filter or draining residual water. If you used a hot wash programme, wait until the water has cooled down before draining any water. Clean the water filter regularly, to avoid that the water cannot drain after the wash due to obstruction of the filter. If the water cannot drain, the display indicates that the water filter may be clogged. 6.
EN User manual TROUBLESHOOTING Your washing machine is equipped with various automatic safety and feedback functions. They enable failures and needed maintenance to be detected and indicated accordingly. These failures are frequently so minor that they can be removed within a few minutes. Anomalies: Possible causes / Solution: The washing machine does not turn on. • • • The plug is not inserted into the electrical outlet, or not enough to make contact. There has been a power failure.
User manual TRANSPORT AND HANDLING Never lift the washing machine by holding it at the worktop. 1. Pull out the mains plug, and close the water tap. 2. Make sure that door and detergent dispenser are properly closed. 3. Disconnect the inlet hose from the water tap, and remove the drain hose from your draining point. Remove all rest water from the hoses, and fix them so that they cannot get damaged during transport. 16 4. Refit the transport bolts.
EN User manual AFTER-SALES SERVICE BEFORE CALLING THE AFTER-SALES SERVICE 1. See if you can solve the problem by yourself with the help of the suggestions given in the TROUBLESHOOTING 2. Switch the appliance off and back on again to see if the fault persists. IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN TOUCH WITH THE NEAREST AFTER-SALES SERVICE To receive assistance, call the number shown on the warranty booklet or follow the instructions on the website www.whirlpool.
Installation guide x1 17 mm - 0.67 inch x1 12 mm - 0.
Installation guide max 2,0 cm max 0,8 inch max 100cm / 39 inch min 60cm / 24 inch B 8,2 f e et A ma x 2 , 5 m / max 100cm / 39 inch min 60cm / 24 inch ext x4 n n 859991534180EN 19