Setup and user guide

ManualsBrandsWhirlpool ManualsDomestic AppliancesFWF 91496B UK

1 “ON/OFF” button

2 Programme selector

3 “Start/Pause” button

4 “Spin” button

5 “Start delay” button

6 “FreshCare+” /

“Key lock“button

7 “Temperature” button

DISPLAY INDICATORS

Door locked

FreshCare+ activated

Start delay activated

Key lock activated

Washing phase

Indicates washing phase of the cycle

Failure: Call Service

Refer to Troubleshooting section

Failure: Water lter clogged

Water cannot be drained; water lter

might be blocked

Failure: No water

No or not sucient inlet water.

In the event of any failure, refer to the

“TROUBLESHOOTING” section

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

CONTROL PANEL

PROGRAMME CHART

PRODUCT DESCRIPTION

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter - behind plinth

7. Plinth (removable)

8. Adjustable feet (4)

DETERGENT DISPENSER

Main wash compartment

Detergent for the main wash, stain remover

or water softener. For a liquid detergent it

is recommended to use removable plastic

partition A (supplied) for a proper dosage.

If powder detergent is used, place the

partition into slot B.

Prewash compartment

Detergent for the prewash.

Softener compartment

Fabric softener. Liquid starch.

Pour in softener or starch solution only up to the “max” mark.

Release button 

Press to remove tray for cleaning.

This data may dier in your home due to changing conditions in inlet water

temperature, water pressure etc. Approximate programme duration values refer to the

default setting of the programmes, without options.

* After programme end and spinning with maximum selectable spin speed, in default

programme setting.

** The duration of the programme is shown on the display.

The washer adapts water, energy and programme duration to your wash load.

6th Sense - the sensor technology adapts water, energy and programme duration to your

wash load.

Cotton - Test wash cycles in compliance with regulations 1061/2010

These are the reference programs for the energy label. Set this wash cycles with a

temperature of 40°C or 60°C. They are the most ecient programmes in terms of energy

and water consumption for washing normally soiled cotton laundry. The actual water

temperature may dier from the declared one.

For all Test Institutes

Long wash cycle for cottons: set wash cycle Cotton with a temperature of 40°C.

Synthetic program along: set wash cycle Synthetics with a temperature of 40°C.

Quick guide

2.1. 3. 4. 5.

6.7.



Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed.

For more detailed instructions on how to remove them, see the Installation Guide.

Max load 9 Kg

Power consumption in o -mode 0.5 W / in left-on mode 8.0 W

Detergents and additives

Recommended

detergent

Residual

dampness % *

Energy

consumption

kWh

Total water lt

Programme

Temperatures

Max. spin

speed

(rpm)

Max

load

(kg)

Duration

(Minutes)

Prewash

Main

wash

Softener

Powder Liquid

Default Range

Mixed 40°C - 40°C 1000 4.5 ** –

 

–



– – –

White 60°C

- 90°C 1400 9.0 **

 (90°)    

– – –

Cotton 40°C

- 60°C 1400 9.0 255 –

   

53 1,10 104

Cotton 60°C

- 60°C 1400 9.0 260 –

   

53 0,70 57,5

- 40°C 1400 9.0 255 –

   

53 1,10 104

Sport 40°C

- 40°C 600 4.0 ** –

 

–



– – –

Duvet 30°C

30°C

1000 3.5 ** –

 

–



– – –

Jeans 40°C

- 40°C 800 4.0 ** –

 

–



– – –

Spin + Drain – – 1400 9.0 ** – – – – – – – –

Rinse + Spin – – 1400 9.0 ** – –



– – – – –

Rapid 30’ 30°C

- 30°C 800 4.5 ** –

 

–



– – –

Colours 15° 15°C 15°C 1000 4.5 ** –

 

–



– – –

Wool 40°C

- 40°C 800 2.0 ** –

 

–



– – –

Delicates 30°C

- 30°C - 1.0 ** –

 

–



– – –

Synthetics 40°C

- 60°C 1200 4.5 200 –

   

32 0,80 78



Dosing required  Dosing optional

Summary of content (4 pages)

PAGE 1
EN Quick guide THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your product on www.whirlpool.eu/register Before using the appliance carefully read the Safety Instruction. Before using the machine, it is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, see the Installation Guide.
PAGE 2
PROGRAMMES FIRST TIME USE For choosing the appropriate programme for your kind of laundry, always respect the instructions on the care labels of the laundry. The value given in the tub symbol is the maximum temperature possible for washing the garment. Mixed For washing lightly to normally soiled resilient garments in cotton, linen, synthetic fibres and mixed fibres. White For washing normally to heavily soiled towels, underwear, table and bed linen, etc in resilient cotton and linen.
PAGE 3
EN Quick guide KEY LOCK To lock the control panel, press and hold the “Key lock” button for approximately 3 seconds. When the display visualises a key symbol , the control panel is locked (with the exception of the “ON/OFF” button). This prevents unintentional changes to programmes, especially with children near the machine. To unlock the control panel, press and hold the “Key lock” button for approximately 3 seconds again.
PAGE 4
TROUBLESHOOTING The washing machine may sometimes not work properly for certain reasons. Before calling the After-sales service, it is recommended to check to see if the problem can be easily resolved using the following list. Anomalies: Possible causes / Solution: • The washing machine does not turn on. • • The plug is not inserted into the electrical outlet, or not enough to make contact. There has been a power failure. The door is not fully closed. The wash cycle does not start.