Energy Guide

PRODUCT MODEL NUMBERS
Because Whirlpool Corporation includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10353374
02/20/2017
Electric Built-in Cooktop
G7CE3034X, G7CE3055X, G7CE3635X, G7CE3655X, G9CE3065X,
G9CE3074X, G9CE3675X, W5CE3024X, W5CE3625A
PRODUCT DIMENSIONS
A. Glass depth - black and white models - 21
3
/
4
" (55.2 cm)
Glass depth - stainless steel models - 22
1
/
4
" (56.4 cm)
B. Glass width - 30" (76.2 cm) models - 30
7
/
8
" (78.4 cm)
Glass width - 36" (91.4 cm) models - 36
5
/
16
" (92.3 cm)
C. Frame depth - 20
1
/
4
" (51.5 cm)
D. Frame width - 30" (76.2 cm) models - 28
15
/
16
" (73.5 cm)
Frame width - 36" (91.4 cm) models - 34
7
/
16
" (87.5 cm)
E. Cooktop height - 3
3
/
4
" (9.6 cm)
F. Cooktop height including conduit (located at rear of
cooktop, right side) - 5
1
/
4
" (13.5 cm)
A
B
D
F
E
C
CABINET DIMENSIONS
IMPORTANT: If installing a range hood or microwave hood combination
above the cooktop, follow the range hood or microwave hood
combination installation instructions for dimensional clearances above
the cooktop surface.
A. 30" (76.2 cm) on 30" models; 36" (91.4 cm) on 36" models
B. Combustible area above countertop (shown by dashed box above)
C. 30" (76.2 cm) minimum clearance between top of cooktop platform
and bottom of uncovered wood or metal cabinet (24" [61 cm]
minimum clearance if bottom of wood or metal cabinet is covered by
not less than
1
/
4
" [0.6 cm] flame retardant millboard covered with not
less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or
0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)
D. 13" (33 cm) recommended upper cabinet depth
E. 2" (5.1 cm) on most models; 2
5
/
8
" (6.7 cm) on model JEC4430B
F. 20
1
/
2
" (52.0 cm) recommended cutout.
Will fit in cutout from 20
3
/
8
"-20
9
/
16
" (51.8-52.2 cm).
G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop
within minimum horizontal clearances to cooktop
H. Junction box or outlet: 7" (17.8 cm) minimum from top of countertop
I. Junction box or outlet: 9" (23.0 cm) maximum from right side of
cabinet
J. 29
1
/
2
" (74.9 cm) recommended cutout on 30" (76.2 cm) models.
Will fit in cutout from 29
1
/
16
"-29
9
/
16
" (73.8-75.1 cm) on 30" (76.2 cm)
models.
35
1
/
2
" (90.2 cm) recommended cutout on 36" (91.4 cm) models.
Will fit in cutout from 34
9
/
16
"-35
9
/
16
" (87.8-90.3 cm) on 36" (91.4 cm)
models.
K. 1" (2.5 cm) minimum distance to nearest left and right side
combustible surface above cooktop
L. 1" (2.5 cm) minimum clearance between back wall and countertop
NOTES: After making the countertop cutout, some installations may
require notching down the base cabinet side walls to clear the cooktop
base. To avoid this modification, use a base cabinet with sidewalls wider
than the cutout.
If cabinet has a drawer, a 5
1
/
2
" (14.0 cm) depth clearance from the top
of the countertop to the top of the drawer (or other obstruction) in base
cabinet is required.
A 3-wire or 4-wire, single phase, 120/240 volt, 60-Hz., AC only
electrical supply is required on a separate, 40-amp circuit fused on
both sides of the line. The model/serial number rating plate is located
on the metal cabinet underneath the cooktop. See the following
illustration.
A. Model/serial number plate
D
A
E
I
J
K
G
H
L
C
F
B
A
ELECTRICAL REQUIREMENTS
NOTE: A separate 30-amp circuit fused on both sides of the
line can be used for models W5CE3024 and G9CE3065.