GA630RTX GB630RTX GA640.1RX GB640.
GB Warnings WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
GB Assistance Communicating: • The type of problem encountered. • appliance model (Mod.) • serial number (S/N) This information is found on the data plate located on the appliance and/or on the packaging.
Description of the appliance Overall view 1 2 3 4 5 Support Grid for Cookware Gas burners Control Knobs for gas burners Ignition for Gas burners* Safety devices* • Gas burners differ in size and power. Use the diameter of the cookware to choose the most appropriate burner to cook with. • Gas burner ignition* enables a specific burner to be lit automatically. • Control Knobs for gas burners adjust the size of the flame. • Safety device* stops the gas flow if the flame is accidentally extinguished.
600mm min. 420mm min. ! Before operating your new appliance please read this instruction booklet carefully. It contains important information for safe use, installation and care of the appliance. 650mm min. Installation If the hob is installed beneath a wall cabinet, the latter must be situated at a minimum of 700 mm above the hob. GB ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
GB wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams). 560 mm . 45 m m. ! The hob can only be installed above built-in ovens with a cooling ventilation system. Where a hob is installed above an oven without a forced ventilation cooling system, adequate ventilation must be provided inside the cabinet by means of air holes through which air can pass (see figure).
Replacing the nozzles on separate “double flame “ burners 1. Remove the grids and slide the burners from their housings. The burner consists of 2 separate parts (see figure); 2. Unscrew the burers with a 7 mm wrench spanner. The internal burner has a nozzle, the external burner has two (of the same size). Replace the nozzle with models suited to the new type of gas (see table 1). 3. Replace all the components by repeating the steps in reverse order. 6.
GB Burner and nozzle specifications (for 65 cm versions only) Table 1 Liquid Gas Burner Thermal power kW (p.c.s.*) Nominal By-pass 1/100 (mm) Thermal power kW (p.c.s.*) Reduced (mm) (mm) Fast (R) 100 0.70 3.00 39 Reduced Fast (RR) 100 0.70 2.60 Semi Fast (S) 75 0.40 Auxiliary (A) 55 Triple Crown (TC) Double flame (DCDR internal) (1) Double flame (1) Diameter Natural Gas Nozzle 1/100 Flow* (g/h) Thermal power kW (p.c.s.
Burner and nozzle specifications (for 75 cm versions only) Table 1 GB Liquid Gas Burner Diameter Thermal power kW (p.c.s.*) Nominal By-pass 1/100 (mm) Thermal power kW (p.c.s.*) Reduced (mm) (mm) Reduced Fast (RR) 100 0.70 2.60 39 Semi Fast (S) 75 0.40 1.65 Auxiliary (A) 55 0.40 Triple Crown (TC) 130 Ultrarapid (UR) Natural Gas Nozzle 1/100 Flow* (g/h) Thermal power kW (p.c.s.*) Nominal Nozzle 1/100 Flow* (l/h) *** ** 80 189 186 2.60 122 (H3) 248 28 64 120 118 1.
GB Start-up and use ! The position of the corresponding gas burner is shown on every knob. Gas cooker hobs are equipped with discrete power adjustment that allows for accurately adjusting the flame to 5 different power levels. Thanks to this system, gas hobs are also capable of guaranteeing the same cooking results for each recipe, as the optimal power level for the desired type of cooking can be identified in an easier, more accurate way.
Practical Advice on Using the Half Fish-Kettle Burner * The two “Half Fish-Kettle” burners, are eliptic in form and can be turned up to 90°. This makes the cooktop more flexible in terms of how it can be used. To turn the two burners 90°, proceed as follows: • Make sure that the burners are cool; • Lift the burner completely out of its housing; • Replace it in its housing in the position desired; • Make sure that the burners are positioned correctly before use.
GB Maintenance and care Troubleshooting Switching the appliance off It may happen that the appliance does not function properly or at all. Before calling the service centre for assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open. Disconnect your appliance from the electricity supply before carrying out any work on it.
After Sales Service GB No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.hotpointservice.co.
GB Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.
GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 15
195097459.