Installation guide

ManualsBrandsWhirlpool Manualswall ovenOfficial Whirlpool electric built-in double oven

Quick Reference

Table of Contents:

Pages

E_ Product dimensions

[_ Cutout dimensions

E_ Before you start

[_ Electrical requirements

[_] Installation steps

If you need assistance:

Check your Use and Care Guide for atoll-free number to call or call

the dealer from whom you purchased this appliance. The dealer is

risted in the Yerlow Pages of your phone directory under

"Appliances -- HousehoMd-- Major -- Service and Repair,"

Call when you:

Have questions about built-in oven installation or operation.

Need to obtain the name and number of an authorized service

company.

When you call, you will need:

D The builbin oven model number.

The built-in oven serial number.

Both numbers are listed on the model/serial rating plate, located on

the oven door or on the oven frame.

Summary of content (5 pages)

PAGE 1
Quick Reference Table of Contents: Pages E_ Product dimensions [_ Cutout dimensions E_ Before you start [_ Electrical requirements [_] Installation steps If you need assistance: Check your Use and Care Guide for a toll-free number to call or call the dealer from whom you purchased this appliance. The dealer is risted in the Yerlow Pages of your phone directory under "Appliances -- HousehoMd-- Major -- Service and Repair," Call when you: Have questions about built-in oven installation or operation.
PAGE 2
Your safety and the safety of others are very imp0rtaet. Double oven Single oven We have provided many important safety messages in this manualand on your appliance, Atwaye read and obey aHsafety messages= 25=3/e"max. 25=3/8" max. j- recessed width recessed width This is the safety alert symbol. This symboi alerts you to potentiai hazards that can kiii or hurt you and others. \ 29"max_ overall 27=1/2" recessed height height 61" max, overs[[ Ati safety messageswiii foiiow the safety alert sym
PAGE 3
ff codes permit and a separate grounding wire is used, it is recommended that a qualified electrician determine that the grounding path and wire gauge are in accordance with bca[ codes. [_ A time-delay fuse or circuit breaker is recommended. if the house has aluminum wiring, follow the procedure below. a.) Connect the aluminum wiring to the copper wire using special connectors designed and Underwriters Laboratories-listed for joining copper to aluminum.
PAGE 4
Electrical connection If your house has aluminum wiring, see "Electrical requirements", Page 2. Electrical Shock Hazard Turn power supply off before connecting wires. cable from iunetion power suppl,/ eabb from power supph! iunetion box _ white _ c>_ w,re _ _>_/¢" grounding oven cable wires -factory crimped Figure 1 cable from oven conduit connector Figure 2 eabte from oven Use 8 gauge solid copper wire. Electrically ground range.
PAGE 5
if oven does not operate: if you need service: [_ Check that circuit breaker is not tdpped or house fuse blown. Maintain the quality built into your built-in oven by calling an authorized service company. To obtain the name and number of an authorized service company: [_ See Use and Care Guide for troubleshooting list.