Product specifications

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product.
Specications subject to change without notice.
Gas Cooktop Features & Specications
Product Dimensions
Cut-Out Dimensions
C
D
E
*
Note: 24" (61 cm) min. clearance if bottom of wood or metal
cabinet is protected by not less than
1
⁄4" (0.6 cm) ame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.04 cm) stainless steel, or 0.024" (0.06 cm) aluminum or
0.020" (0.05 cm) copper. 30" (76.2 cm) min. clearance between
top of cooking platform and bottom of unprotected wood or
metal cabinet.
36" models require a 36" minimum base cabinet. After making
the countertop cutout, some installations may require notching
down the base cabinet side walls to clear the burner box. To
avoid this modication, use a base cabinet with side walls
wider than the cutout. If cabinet has a drawer, a 4" depth
clearance from the countertop to the top of the drawer (or other
obstruction) in base cabinet is required. The drawer depth may
need to be shortened to avoid interfering with the regulator. All
dimensions are shown in inches.
Cooktop
Model
Cutout
Width
A
Cutout
Depth
B
Overall
Width
C
Depth
D
Burner
Box
Height
E
GLT3657R 35
1
⁄ 4 19 36
5
⁄ 16 21
1
⁄ 8 2
7
⁄ 8
All dimensions are shown in inches. Note: Dimensions A and B below.
Model No. Whirlpool Gold®
36" GLT3657R
Cooktop
Tempered-Glass Cooktop Yes
Burner Type Sealed
AccuSimmer® System Burner Yes
Ignition Electronic
Burner BTU/hr. Rating:
Right Front 12,500
Left Front 12,500
Right Rear 9,100
Center Rear 6,000
Left Rear 6,000
Porcelain-Coated Cast-Iron Grates Yes
Non-Turn Grates Yes
Lift-O Control Knobs Yes
General Information
LP Conversion Kit Included Yes
Approval Over Single Oven Yes
Approval with Downdraft Yes
Approx. Shipping Weight (lbs.) 47