GC640IX GC640WH GC640BK GC751TX GC750X GC641IX GCD641IX GCA641IX GCB641X GCB640X GC641IK GCL640TK GCL641TX GC640TK GCB751X English Operating Instructions HOB Contents Pl ea 08 se to 44 ph ac 8 o gu tiv 24 ne ar ate 24 us an y 2 on te ou 4 e r Operating Instructions,1 Warnings,2 Assistance,2 Description of the appliance,3 Installation,4 Start-up and use,8 Precautions and tips,8 Maintenance and care,9 Troubleshooting,9 After Sales Service,11 Guarantee,12
GB Warnings WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
Description of the appliance Overall view 1 2 3 4 5 Support Grid for Cookware Gas burners Control Knobs for gas burners Ignition for Gas burners* Safety devices* • Gas burners differ in size and power. Use the diameter of the cookware to choose the most appropriate burner to cook with. • Gas burner ignition* enables a specific burner to be lit automatically. • Control Knobs for gas burners adjust the size of the flame. • Safety device* stops the gas flow if the flame is accidentally extinguished.
GB Installation ! Before operating your new appliance please read this instruction booklet carefully. It contains important information for safe use, installation and care of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
• Where the hob is not installed over a built-in oven, a wooden panel must be installed as insulation. This must be placed at a minimum distance of 20 mm from the lower part of the hob. Ventilation To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams). 560 mm . 45 m m.
GB 1. Remove the hob grids and slide the burners off their seats. 2. Unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see table 1 “Burner and nozzle characteristics”). 3. Reassemble the parts following the above procedure in the reverse order. 4. Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Sticker are available from any of our Service Centres. Replacing the Triple ring burner nozzles 1.
Burner and nozzle specifications GB Table 1 Liquid Gas Burner Diameter (mm) Thermal power kW (p.c.s.*) Reduced Fast (R) 100 0.70 3.00 39 Reduced Fast (RR) 100 0.70 2.60 Semi Fast (S) 75 0.40 Auxiliary (A) 55 Triple Crown (TC) Ultrarapid (UR) Flow* (g/h) Thermal power kW (p.c.s.*) Nominal Nozzle 1/100 Flow* (l/h) *** ** 86 218 214 3.00 132 (H) 286 39 80 189 186 2.60 122 (H) 248 1.65 28 64 120 118 1.65 96 (Z) 157 0.40 1.00 28 50 73 71 1.
GB Start-up and use General safety ! The position of the corresponding gas burner is shown on every knob. Gas burners Each burner can be adjusted to one of the following settings using the corresponding control knob: ● Off Maximum Minimum To light one of the burners, hold a lit match or lighter near the burner and, at the same time, press down and turn the corresponding knob anti-clockwise to the maximum setting.
areas, other communal collection areas, or if national legislation allows return it to a retailer when purchasing a similar new product. All major household appliance manufacturers are active in the creation of systems to manage the collection and disposal of old appliances. Maintenance and care Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. The burner does not remain lit when set to minimum.
GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 10
After Sales Service GB No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.hotpointservice.co.
195097584.04 01/2014 - XEROX FABRIANO GB Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.