GC640BK GC640IX GC640TK GC640TX GC640WH GC641IK GC641IX GC750X GC751TX GCA641IX GCB641X GCB751X GCL640TK GCL641TX GF751TX English Operating Instructions HOB Contents Operating Instructions,1 Warnings,2 Description of the appliance,3 Installation,4 Start-up and use,8 Precautions and tips,8 Maintenance and care,9 Troubleshooting,9 Product Guarantee and Repair Information,10
GB Warnings WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
Description of the appliance Overall view 1. 2. 3. 4. 5. Support Grid for COOKWARE GAS BURNERS Control Knobs for GAS BURNERS Ignition for GAS BURNERS SAFETY DEVICES • GAS BURNERS differ in size and power. Use the diameter of the cookware to choose the most appropriate burner to cook with. • Control Knobs for GAS BURNERS adjust the size of the flame. • GAS BURNER IGNITION enables a specific burner to be lit automatically. • SAFETY DEVICE stops the gas flow if the flame is accidentally extinguished.
Positioning ! Keep packaging material out of the reach of children. It can become a choking or suffocation hazard (see Precautions and tips). ! The appliance must be installed by a qualified professional according to the instructions provided. Incorrect installation may cause harm to people and animals or may damage property. ! This unit may be installed and used only in permanently ventilated rooms in accordance with current national regulations.
• Where the hob is not installed over a built-in oven, a wooden panel must be installed as insulation. This must be placed at a minimum distance of 20 mm from the lower part of the hob. Ventilation To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams). 560 mm . 45 m m.
GB 2. Unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see table 1 “Burner and nozzle characteristics”). 3. Reassemble the parts following the above procedure in the reverse order. 4. Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Sticker are available from any of our Service Centres.
Burner and nozzle specifications GB Table 1 Liquid Gas Burner Diameter Thermal power kW (p.c.s.*) Nominal By-pass 1/100 (mm) Thermal power kW (p.c.s.*) Reduced (mm) (mm) Fast (R) 100 0.70 3.00 39 Reduced Fast (RR) 100 0.70 2.60 Semi Fast (S) 75 0.40 Auxiliary (A) 55 Triple Crown (TC) Ultrarapid (UR) Flow* (g/h) Thermal power kW (p.c.s.*) Nominal Nozzle 1/100 Flow* (l/h) ** 86 218 214 3.00 132 (H) 286 39 80 189 186 2.60 122 (H) 248 1.65 28 64 120 118 1.
GB Start-up and use Precautions and tips ! The position of the corresponding gas burner is shown on every knob. ! This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.
the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. Respecting and conserving the environment • Cook your food in closed pots or pans with well-fitting lids and use as little water as possible. Cooking with the lid off will greatly increase energy consumption. • Use purely flat pots and pans.
GB Product Guarantee and Repair Information Guarantee 12 Months Parts and Labour Guarantee Your appliance has benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase.
GB 11
195126178.02 03/2015 - XEROX FABRIANO GB Indesit Company S.p.A. Viale Aristide Merloni,47 60044 Fabriano (AN) www.hotpoint.co.