Instruction for Use

9
Before cleaning or carrying out maintenance,
press the ON/OFF push button and close the
water tap.
1.
Clean the appliance exterior with a neutral
detergent. Do not use abrasive detergents.
2.
Regularly wipe the door seal and inside of the
door with a damp cloth to remove any food
residues.
If the spray nozzles become clogged with
food residues,
clean the spray arms as follows:
Upper spray arm:
•
Detach the spray arm by pushing it up
1
and
turning it counter-clockwise
2
then pull it
down
3
.
•
Rinse the nozzles under running water.
•
Remount the spray arm by aligning it with the
rotary mounting and insert it.
Make sure the spray arm rotates freely.
Lower spray arm:
•
Pull the spray arm up (see drawing).
•
Rinse the nozzles under running water.
•
Remount the spray arm by aligning it with the
rotor pin and insert it.
•
Remount the spray arm and pull it down.
Make sure the spray arm rotates freely.
Cleaning the filters:
1.
Rotate the central filter
H
by turning it
counter-clockwise and extract it by pulling it
up.
2.
Pull out the cylindrical filter
L
and extract it
from the microfilter
M
separate the plastic
filters by gently pushing on both pieces and
pull (see drawing).
3.
Having removed the central filter you have
also the possibility to take out the
G
filter (it is
sufficient to lift it out).
4.
Clean all the components.
While reassembling please note that the
filters must be correctly assembled to
ensure good washing results.
MAINTENANCE AND CLEANING
1
2
3