Use and care guide

Problem Possible cause Solution

The oven or the burner will not

switch on.

Power cut.

Disconnection from the

mains electricity.

Check for the presence of mains electrical

power and whether the oven is connected to

the electricity supply.

Wait at least one minute, then try to switch

the oven on again and see if the problem

persists.

Gas supply interrupted. Check that the gas tap upstream of the oven

is open or that the liquid gas cylinder (if

being used) is not empty.

Switch-on procedure

carried out incorrectly.

Wait at least one minute and then repeat the

steps described in the “How to operate the

oven” section.

In the event of problems, turn the adjustment knob back to the position and open the oven door.

DAILY USE

Before calling the After-Sales Service:

See if you can solve the problem yourself with the

help of the suggestions given in the “Troubleshoot-

ing”.

If after the above checks the fault still occurs, get in

touch with the nearest After-sales Service.

Always specify:

• a brief description of the fault;

• the type and exact model of the oven;

• the service number (number after the word Service

on the rating plate), located on the right hand edge of

the oven cavity (visible when the oven door is open).

The service number is also indicated on the guarantee

booklet;

• your full address;

• your telephone number.

If any repairs are required, please contact an autho-

rised After-sales Service (to guarantee that original

spare parts will be used and repairs carried out cor-

rectly).

AFTER SALES SERVICE