Use & care guide

25
Fabric Care Product Updates
Maytag and Whirlpool Dryers
Motor Pulley Comes Loose
Model Numbers Serial Number Range M035 -M105
MEDB200VQ0 MGDB200VQ0 WED7300XW0 WGD7400XW0 YMEDB850WQ0
MEDB400VQ0 MGDB400VQ0 WED7400XW0 WGD7600XW0 YMEDB850WR0
MEDB800VQ0 MGDB800VQ0 WED7600XW0 WGD7800XB0 YWED7300XW0
MEDB850WB0 MGDB850WB0 WED7800XB0 WED7800XB0 YWED7400XW0
MEDB850WL0 MGDB850WL0 WED7800XL0 WGD7800XW0 YWED7600XW0
MEDB850WQ0 MGDB850WQ0 WED7800XW0 YMEDB400VQ0 YWED7800XL0
MEDB850WR0 MGDB850WR0 WGD7300XW0 YMEDB850WL0
Customer Concern:
Blower pulley comes loose from blower sha.
Cause:
The pulley may not have been ghtened
properly.
Correcon:
1. a.) Unplug dryer or disconnect the
power. Remove front panel and lint
chute, see gure 1.
b.) Remove the blower pulley (Fig-
ure 2), completely from the bearing
sha (if not already disengaged).
Figure 1
Figure 2Connued on next page.