Installation guide

Ifusinganexistingventsystem,cleanlintfromtheentirelengthof
thesystemandmakesureexhausthoodisnotpluggedwithlint.
Replaceanyplasticormetalfoilventwithrigidmetalorflexible
metalvent.
Typical exhaust installations
Typical installations vent the dryer from the rear of the dryer. Other
installations are possible.
2
J !:
,..........
1, Dryer
2. Elbow
3. Watt
4. Exhaust hood
5. Clamps
6. Rigid metal or flexible metal vent
7. Vent length necessary to connect elbows
8. Exhaust outlet
Optional exhaust installations
This dryer can be converted to exhaust out the right side, left side,
or through the bottom. Contact your local dealer to have the dryer
converted.
Fire Hazard
Cover unused exhaust holes with one of the following
kits:
279818 (white)
279819 (almond)
279915 (graphite)
279925 (biscuit)
Contact your local dealer.
Failure to follow these instructions can result in death,
fire, electrical shock, or serious injury.
Alternate installations for close clearances
Venting systems come in many varieties. Select the type best for
your installation. Two close-clearance installations are shown.
Refer to the manufacturer's instructions.
"'-i ..... """--[
1 2
1. Over-The-Top installation (also available with
one offset elbow)
2. Periscope installation
NOTE: The following kits for close clearance alternate installations
are available for purchase. See the service numbers located in
your "Dryer User Instructions."
• Over-The-Top Installation:
Par[ Number 4396028
• Periscope Installation (For use with dryer vent to wall vent
mismatch):
Par[ Number 4396037 - 0 in. (0 cm) to 18 in. (46.72 cm)
mismatch
Par[ Number 4396011 - 18 in. (45.72 cm) to 29 in. (73.66 cm)
mismatch
Par[ Number 4396014 - 29 in. (73.66 cm) to 50 in. (127 cm)
mismatch
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
2
1, Standard rear offset exhaust installation
2. Left or right side exhaust installation
3. Bottom exhaust installation
3
6