Whirlpool User Guide Ice Maker E, be downloaded at The model number is located on the inside of the ice maker. gz In the USA, register your ice maker at www.whirlpool.com. In Canada, register your ice maker at www.whirlpool.ca, Para una version de etas instructions en espalier, visit www.whirlpool.com, [El 3. | LEARN MORE . in an effort to conserve natural resources, this ice maker includes a condensed User Guide. A complete User Guide can Your safety and the safety of others are very important.
. When the desired thickness is reached, the ice sheet is released and slides onto a cutter grid. The grid divides the sheet into individual cubes. 3. The water containing the rejected minerals is drained after each freezing cycle. 4. Fresh water enters the machine for the next ice making cycle. 5. Cubes fall into the storage bin. When the bin is full, the ice maker shuts off automatically and restarts when mare ice is needed. The ice bin is not refrigerated, and some melting will occur.
5. Tum the filter clockwise until it locks into the housing. Ensure that the alignment arrow on the filter head aligns with the locked symbol on the control box housing. NQTE:! If the filter is not correctly locked into the housing, the ice maker will not produce ice. A Alignment arrow aligned with lacked symbol The Water Filter Status Light The water filter status lights will help you know when to change your water filter.
. Replace the drain cap securely on the water pan, If the drain cap is loose, water will empty from the water pan and you will have either thin ice or no ice. 5. Read and follow all handling information on the cleaner bottle before completing the steps below. Use one 16 oz (473 mL) bottle of approved ice maker cleaner. B. Pour one bottle of solution into the water pan. Fill the bottle twice with tap water and pour it into the water pan, A Water pan B. rain cap 7. Press the CLEAN button.
EE TN EA) Scan the code at left with your mobile device, or visit for recommendations that may help you avoid a service call. lee Maker Operation Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter, Do not use an extension card, Failure to folio these instructions can result in death, fire, or electrical shock.
lee Production Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock, PROBLEM RECOMMENDED SOLUTIONS Ice Maker Runs But Produces No Ice Check that the control is turned on. Check that the water supply is properly connected and turned on, If the drain cap is loose, water will empty from the water pan. and you will have either thin ice or no ice. Tighten the drain cap Clean the drain tube.
Plumbing Problems mE eid Excessive Weight Hazard Use two or more people to move and install ice maker. Failure to do so can result in back or other injury. PROBLEM RECOMMENDED SOLUTIONS Water Not Entering Drain If the drain hose Js not aligned over the drain, move the ice maker to align the drain, Properly NOTE: Service technicians cannot repair plumbing problems outside of the ice maker.
WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance Is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool} will pay for Factory Specified Parts and repair labor to correct defects in materials or workmanship, Service must be provided by a Whirlpool designated service company.
” Whirlpool Guide d'utilisation Machine a lagons A POUR EN SAVOIR PLUS Afin de conserva las ressources naturelles, cette machine a lagons comprend un guide d'utilisation rapide. L'utilisateur = peut télécharger un guide complet sur www.whirlpool.ca. Le numéro de modelé se trouve sur la parole interne de la machine a lagons, i Aux enregistrer la machine a lagons a www.whirlpool.com. 0} Bw Au Canada, enregistrer [a machine a lagons a www.whirlpool.ca, Votre sécurité et celle des autres est trais importante.
2. Une fols qu'elle a atteint 'épaisseur désirée, la plagie de glace se dégage st glisse dans une grille de coupe, ol elle ast taillée en lagons. 3. Leah contenant les déchets minéraux est évacue après chaque programme de congélation. 4. De Eau fraîche s’infiltre de nouveau dans {a machine en vue du prochain programme de fabrication de lagons. 6. Les lagons tombent dans le bac d’entreposage.
5. Boumer le filer dans le sens horaire jusqu ce GULL s’emboîte dans le logement. S'assurer que la flache d'alignement de [a tété du filtre soit alignée avec le symbole de verrouillage sur le logement du module de commande.
4. Réinstaller le bouchon de vidange solidement sur le bac & eau. Aile bouchon de vidange est desserré, l'eau s'écoulera du bac a eau et la glace Sara mince ou il n'y aura pas de glace. 5. Lire ef suivre toutes les instructions apparaissant sur la bouteille de produit de nettoyage avant de suivie 4 étapes suivantes. Utiliser une bouteille de 16 0z (473 ml) de produit de nettoyage approuvé pour la machine a lagons. B. Verser une bouteille de cette solution dans le bac a eau.
Scannez le code a gauche avec votre téléphone portable ou consultez www.whirlpool.ca pour des conseils qui vous permettront peut-être d’éviter une intervention de dépannage. Risque de chou électrique Branches sur une prise & 3 alvéoles relise a la terre, Ne pas enlever la branche de Saison & la terre, Ne pas utiliser un adaptateur. Ne pas utiliser un clébe de rallonge. Le non-respect de ces instructions peut causer un décis, un incendie ou un choc électrique.
Production de lagons 2 Risque de choc électrique Déconnecter la source de courant électrique avant Entretien. Replacer piques of panneaux avant de faire la remise en marche, Le non-respect de ces instructions peut causer un décès ou un choc électrique. PROBLÈME SOLUTIONS RECOMMANDÉES La machine a lagons fonctionne mais ne produit pas de lagons Assurer que la commande est régie & marche.
Problèmes de plomberie Risque du poids excessif Utiliser deux ou plus de personnes pour déplacer at installer la machine a lagons. Le non-respect de celte instruction peut causer une blessure au dos ou d'autre blessures. PROBLÈME SOLUTIONS RECOMMANDÉES Leah ne pénétré pas Si le tuyau de vidange n’est pas aligné au-dessus du drain de vidange, déplacer la machine a lagons pour qu'elle correctement dans le système | s'aligne avec le drain de vidange.
A AAA TC GARANTIE DES GROS APPAREILS MÉNAGERS WHIRLPOOL CORPORATION GARANTIE LIMITÉE Pendant un an & compter de la date d'achat, lorsque ce gros appareil ménager est utilisé et entretenu conformément aux instructions jointes & ou fournies avec le produit, Whirlpool Corporation ou Whirlpool Canada LP {ci-après désignées “Whiripool™) lapera pour les pièces spécifies par l'usine et la pour corriger les vices de latéraux ou de fabrication.