Refrigerator User Manual

4-16
Freezer Components (continued)
Tech Sheet Do not discard
FOR SERVICE TECHNICIAN’S USE ONLY
DANGER
Electrical Shock Hazard
Only authorized technicians should perform diagnostic
voltage measurements.
After performing voltage measurements, disconnect
power before servicing.
Failure to follow these instructions can result in death or
electrical shock.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
When performing live voltage measurements, you must do the following:
Verify the controls are in the off position so that the appliance does not start when energized.
Allow enough space to perform the voltage measurements without obstructions.
Keep other people a safe distance away from the appliance to prevent potential injury.
Always use the proper testing equipment.
After voltage measurements, always disconnect power before servicing.
Voltage Measurement Safety Information
DANGER
Electrical Shock Hazard
Only authorized technicians should
perform diagnostic voltage measurements.
After performing voltage measurements,
disconnect power before servicing.
Failure to follow these instructions can
result in death or electrical shock.
WARNING
Electrical Shock Hazard
Plug into a grounded (earthed) outlet.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before
operatating.
To check for proper voltage, complete the following steps:
1. Disconnect power.
2. Connect voltage measurement equipment.
3.Reconnectpowerandconrmvoltagereading.
4. Disconnect power after performing voltage measurement.