Refrigerator User Manual

5-4
Programming (continued)
Figure 7
Adjusting Temperature Set Points:
Pressing and holding TEMPERATURE starts a 3 second countdown. During the
countdown using the dispenser cancels the countdown and no dispensing is permitted.
The number 3 blinks 3 times and an invalid tone sounds 3 times,. The user has to release both
the pad and the button and press the button again to start the countdown over.
During the countdown, pressing any other button or releasing the pad cancels the countdown.
The user has to start over. Please note: the blinking and toning is synchronized so that the
moment the number ‘3’ blinks, the tone is sounded. After 3 seconds, the TEMPERATURE
shows up with the
CURRENT refrigerator setting.
See gure 7.
Pressing TEMPERATURE changes between the refrigerator and freezer compartments and
displays the current setting. Pressing the ICE MODE pad or after 60 seconds of no activity, the
display will revert back to the normal screen.