Refrigerator User Manual

6-5
Machine Compartment Components (continued)
Condenser Fan: The condenser fan motor
is a step motor and cannot be checked with
an Ohmmeter. The condenser fan blade can
be pulled off to replace without removing the
assembly.
1. Unplug the refrigerator or disconnect
power.
2. Pull off the fan blade.
3. Disconnect the wire harness.
4. Remove the screws securing the motor
to the mounting bracket and remove
To remove the condenser fan assembly:
1. Disconnect power to the refrigerator.
2. Remove 1/4” screw and slide the
assembly out of the brackets in the base.
Wire Harness
Screws
2
Slide
Screw
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
To remove the condenser fan motor: