THREESPEED AUTOMATIC WASHER For questions about features, operation/performance, parts, accessories or service call: 1-800-253-1301 In Canada, for assistance call: 1-800-461-5681, for installation and service call: 1-800-807-6777 or visit our website at www.whirlpool.com or www.whirlpooLcom/canada Table of Contents ..............................................................
kBLE OFCONTENTS WASHER SAFELY ...................................................................... 3 PAR'IS AND FEATURES ............................................................ 4 WASHER USE ............................................................................. Understanding Washer Cycles .................................................... Loading ......................................................................................... Normal Washer Sounds .................................
WASHER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety follow the safety alert symbol and either the word "DANGER" or This is themessages safety alertwillsymbol. "WARNING." These words mean: Youcan be killed or seriously injured if you don't immediately follow instruction•.
PARTSANDFFATURES 1 6 • • 7 4 1. 2. Control panel Model and serial number label 3. Liquid fabric softener dispenser 4. 5. XTRA ROLL ACTION Lid TM 6. 7, 8.
WASHER USE Loading suggestions For these suggested full-sized to the highest setting. When the Cycle Control knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down. During agitation, the agitator creates a continuous rollover action that provides a thorough cleaning of the wash load.
Drop a sorted load of clothes loosely into your washer. 2. • Load evenly to maintain washer balance. Mix large and small items. • Items should move easily through the wash water. Overloading can cause poor cleaning. • To reduce wrinkling of permanent press clothes and some synthetic knits, use a large load size to provide more space (see step 5). (OPTIONAL STEP) Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser.
6. Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest water safe for fabric. Follow garment label instructions. • Your washer uses the ACCUWASH TM automatic temperature control. The ACCUWASH feature maintains a uniform water temperature by regulating incoming hot and cold water. This helps eliminate undissolved detergent and ensures consistent cleaning resu)ts. The cold wash is regulated at approximately 75_F (24°C).
When using extra detergent for heavily soiled clothes, or washing speciaFcare items, you may find an extra rinse and spin is needed. 1. Push in the Cycle Control knob and turn it clockwise to any of the Rinse settings. 2. Pull out the Cycle Control knob. The washer fills to the selected load size, agitates, drains, and spins. NOTE; Your washer has an EXTRA RINSE selector that allows you to add an extra rinse automatically to any wash cycle. See "Starting Your Washer.
• Is your voltage low? Check your electrical source or call an electrician. Do not use an extension cord. TROUBLESHOOTING First try the solutions suggested the cost of a service call... Washer continues to fill or drain, or the cycle seems stuck here and possibly avoid Is the top of drain hose lower than the water level in washer? The top of the hose must be higher than the water level in the washer for proper operation. See the Installation Instructions.
Load is wrinkled Agitator operation • The top of the agitator is loose, or moves in only one direction. This is normal. Did you unload the washer promptly?. Unload the washer as soon as it stops• Did you use the right cycle for the load being washed? Use the Casual/Permanent Press cycle or another cycle with low spin speeds (if available) to reduce wrinkling• Dispensers clogged or bleach leaking Did you overload the washer?.
ASSISTANCEOR SERVICE Before calling for assistance or service, please check "Troubleshooting." It may save you the cost of a service call. If you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help Whirlpool to better respond to your request. If you need replacement parts If you need to order replacement parts, Whirlpool recommends that you only use FSP ®factory specified parts.
WtIIRLPOOLGOLD ®WASHER WARRANTY ONE-YEAR FULL WARRANTY For one year from the date of purchase, when this washer is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation will pay for FSP" replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company.