Instruction for Use

17
IMPORTANT: Before switching on the hob, deactivate the SAFETY DEVICE by pressing button “E”.
IMPORTANT: The hob's safety features include an automatic switching off function. Prolonged use of the same heat
setting causes switching off of the cooking zone (e.g. after approx. 1 hour at maximum heat setting, the cooking zone
switches off).
A
B
C
D
E
F
B
C
B
C
B
C
B
C
G
A On/Off E Safety
B Heat setting increase F Timer
C Heat setting decrease G Activates/deactivates the dual cooking zone
D Fast boil
To switch the hob on, keep button “A” pressed for approx. 2 seconds. The 4 cooking zone displays show “0”.
If within about 10 sec. none of the cooking zones is activated, the hob switches itself off automatically on safety
grounds.
Press one of the buttons “B” corresponding to the cooking zone you intend to use.
Select the heat setting required with buttons “B” or “C”. The other selectable cooking settings go from 1 - 9.
IMPORTANT: After setting the required power level, the induction cooking zone is deactivated within 60
seconds if a cooking pot or pan is not placed on it.
To modify the power of a cooking zone, press the buttons “B” or “C”.
If the cooking zone is on, it can be switched off by pressing the buttons “B” and “C” at the same time.
Press button “A” to switch off all activated plates.
The CHILD SAFETY function is switched on by holding down button “E” until a dot lights up above the
function button. This function locks all the buttons except the hob switching off button “A”. The function
remains on even after the hob is switched off and on again and can be deactivated by pressing button “E” again
until the dot above the function button goes off.
The TIMER function (if available) can be used as a clock and also for programming the operation of the required
cooking zones. To activate the function, press the button with the clock symbol “F”. To programme the timer
for a given cooking zone, first select the desired cooking zone using one of the buttons “B”. A dot lights up
next to the display of the selected cooking zone. Within 10 seconds, set the cooking time using buttons “F”
+/- (99-10 min).
The Timer function begins automatically and the red indicator dot remains lit.
At the end of the set cooking time, an acoustic signal sounds. If the cooking zone has been programmed to
operate with the timer, it is switched off and the indicator dot switches off too.
The timer function can only be used to activate one cooking zone.
To use the “minute minder” function, press the button with the clock symbol “F”, set the power of the cooking
zone to 0 (zero) and then press buttons “F” +/- to set the desired time.
When the set time has elapsed, an acoustic signal sounds.
The FAST BOIL function sets a heating level higher than max. to bring water rapidly to the boil.
To activate the function, select a cooking zone with button “B” and press button “D”.
A “P” appears on the display.
DUAL COOKING ZONE function (if available). Press button “G” to deactivate or activate the outer ring of
the double cooking zone.
H
RESIDUAL HEAT INDICATOR.
When the cooking zone is switched off, the residual heat indicator “H” remains on or flashes alternating with
“0” until the temperature of the hob returns within safety levels.
UntitledBooktemp.book Page 17 Wednesday, December 10, 2008 12:43 PM