Instruction for Use

GB12
- Never use steam cleaning equipment.
- Disconnect the appliance from the power supply.
IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean
immediately with a damp cloth.
• Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin the enamel surface.
• Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions.
IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals.
WARNING:
CLEANING
1. Control panel
a. ON/OFF light key
Press briefly to switch the lights on and off.
Press and hold down to adjust the light intensity.
b. Motor ON/OFF key and speed selection (suction power)
Note: Press the button for 2 seconds to switch the hood off:
c. Selected speed LED
2. Grease filter (above the perimeter suction filter)
3. Halogen bulbs
4. Perimeter suction panel
DESCRIPTION OF THE HOOD
1
2
3
3
4
1 2 3
abc