Instruction for Use

18
Heat Exchanger
Before cleaning or
carrying out
maintenance, switch off
the dryer.
Clean the heat exchanger
at least every three
months, proceeding as
follows:
A.
Open the door and press
the heat exchanger flap
button on the bottom of
the door entrance.
B.
The heat exchanger flap
opens.
C.
Fold the heat exchanger
handle upwards to the
horizontal position and
remove the heat
exchanger.
D.
Clean the heat exchanger
under running water by
turning it around to reach
all sides.
E.
Wipe away dust and lint
from the seals and the heat
exchanger.
F.
Remove the lint in the heat
exchanger housing. Keep
the drainage hole (left side
in front in the housing) free
from lint.
G.
Replace the condenser in its
housing (TOP or HAUT
mark upwards) and press
the handle.
H.
Close the flap.
The heat exchanger aluminium
plates may become discoloured
over time.
A
B
C
D