Instruction for Use

ENGLISH 8
the grease lter may become dull; this does
not effect its ltering capacity.
Greaseltermaintenance:
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease lters: pull the spring
release handle, then remove the lter
downwards.
3. After cleaning the grease lter, remount
in reverse order ensuring the entire
extraction surface is covered.
Charcoalltermaintenance
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease lter
3. If charcoal lters are already present
(two lters tted, covering the protection
grids of the motor impeller) and must
be replaced, turn the central handle
anticlockwise to unlock them. Reverse
procedure to install new ones.
4. Ret the grease lter.
Charcoal lter is neither lavable nor
regenerable.
Replace the charcoal lter every 4
months.
ReplacingtheHalogenlamps
WARNING:- Only use 20W MAX - G4
halogen lamps.
1. Disconnect the hood from the electric
power supply.
2. Insert the blade of a small at
screwdriver where indicated by the
three points, and with a gentlepressure
remove the light cover from its position.
3. Remove the faulty lamp and replace
with a new one.
4. Replace the cover (spring lock system).
IMPORTANT: make sure you don’t
touch the lamp with your hands.