Instruction for Use

ManualsBrandsWhirlpool ManualsDishwashersHIP 4O23 WGTL

INSTRUCTION FOR USE

THANK YOU FOR PURCHASING A HOTPOINT-ARISTON PRODUCT.

To receive more comprehensive help and support, please register your product at:

www.hotpoint.eu/register

Before using the appliance carefully read Health and Safety guide.

PRODUCT DESCRIPTION

APPLIANCE

1. Upper rack

Cutlery rack

3. Foldable flaps

4. Upper rack height adjuster

5. Upper spray arm

6. Lower rack

7. Space Zone

8. Lower spray arm

9. Filter Assembly

10. Salt reservoir

11. Detergent and Rinse Aid dispensers

12. Rating plate

13. Control panel

0000 000 00000

Service:

CONTROL PANEL

1. ON/OFF button

2. PREVIOUS button

3. NEXT button

4. Tablet Detergent (All-in-one) button

5. Zone Wash button

6. Zone Wash

indicator ligh

7. Display

8. Eco program indicator light

9. Start Delay indicator light

10. Program number and remaining time indicator

11. Closed water tap indicator light

12. Rinse Aid refill indicator light

13. Salt refill indicator light

14. Tablet Detergent (All-in-one) indicator light

15. Zone Wash 3D button with indicator light

16. Turbo button with indicator light

17. Extra Dry button with indicator light

18. Start Delay button with indicator light

19. START button with indicator light

5678910 11 13121

234

14 15 16 17 18 19

Summary of content (12 pages)

PAGE 1
EN INSTRUCTION FOR USE THANK YOU FOR PURCHASING A HOTPOINT-ARISTON PRODUCT. To receive more comprehensive help and support, please register your product at: www.hotpoint.eu/register Before using the appliance carefully read Health and Safety guide. PRODUCT DESCRIPTION APPLIANCE 1 2 7 8 9 3 10 4 11 5 1. Upper rack 2. Cutlery rack 3. Foldable flaps 4. Upper rack height adjuster 5. Upper spray arm 6. Lower rack 7. Space Zone 8. Lower spray arm 9. Filter Assembly 10. Salt reservoir 11.
PAGE 2
FIRST TIME USE SETTING MENU AND SALT ADVICE REGARDING THE FIRST TIME USE FILLING THE SALT RESERVOIR After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack. The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components. • It is important that the salt reservoir be never empty. • It is important to set the water hardness. SETTING MENU 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 3
EN FIRST TIME USE RINSE AID AND DETERGENT FILLING THE RINSE AID DISPENSER FILLING THE DETERGENT DISPENSER Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control panel is lit. Only use detergent which has been specifically designed for dishwashers. To achieve the best washing and drying results, the combined use of detergent, rinse aid liquid and refined salt is required.
PAGE 4
PROGRAMS TABLE Drying phase Program P1 Eco 50° P2 Auto Intensive 65° P3 Auto Normal 55° P4 Auto Fast 50° P5 Delicates 45° P6 Express 30’ 50° P7 Good Night P8 Sanitizing P9 Soak P10 Self- Clean Available options *) Detergent dispenser B Tub Duration of Water wash program consumption (h:min)**) (litres/cycle) Energy consumption (kWh/cycle) 3:40 9.5 0.93 2:00 - 3:10 14 - 17 1.50 - 1.85 1:30 - 2:30 14.5 - 16 1.15 - 1.30 - 0:55 - 1:20 13 - 14.5 1.15 - 1.25 - 1:40 11.5 1.
PAGE 5
EN OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. TABLET DETERGENT (All-in-one) START DELAY This setting allows you to optimize the performance of the program according to the type of detergent used.
PAGE 6
DAILY USE 1. CHECK WATER CONNECTION Check that the dishwasher is connected to the water supply and that the top is open. 2. LOAD THE RACKS (see LOADING THE RACKS) 3. FILLING THE DETERGENT DISPENSER (see PROGRAMS TABLE). 4. SWITCH ON THE DISHWASHER Open the door and press the ON/OFF button. Please note that buttons are deactivated while door is opened more then 3/4 from vertical (closed) position. 5.
PAGE 7
EN LOADING THE RACKS CUTLERY RACK FOLDABLE FLAPS WITH ADJUSTABLE POSITION The third rack was designed to house the cutlery. Arrange the cutlery as shown in the figure. A separate arrangement of the cutlery makes collection easier after washing and improves washing and drying performance. Knives and other utensils with sharp edges must be positioned with the blades facing downwards. The geometry of the rack makes it possible to place such small items as coffee cups in the area in the middle.
PAGE 8
CARE AND MAINTENANCE ATTENTION: Always unplug the appliance when cleaning it and when performing maintenance work.Do not use flammable liquids to clean the machine. CLEANING THE DISHWASHER Any marks on the inside of the appliance may be removed using a cloth dampened with water and a little vinegar. The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
PAGE 9
EN INSTALLATION ATTENTION: If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. CONNECTING THE WATER SUPPLY ELECTRICAL CONNECTION Adaptation of the water supply for installation should only be performed by a qualified technician. The water inlet and outlet hoses may be positioned towards the right or the left in order to achieve the best possible installation. Make sure the dishwasher does not bend or squash the hoses.
PAGE 10
TROUBLESHOOTING Your dishwasher may not work properly. Before contacting the Service Centre check if the problem can be solved by going through the following list. PROBLEMS POSSIBLE CAUSES SOLUTIONS The dishwasher won’t The appliance has not been plugged in properly. Insert the plug into the socket. start or does not Power outage. The dishwasher starts automatically when the power returns. respond to comThe dishwasher door is not closed. Vigorously push the door until you hear the “click”. mands.
PAGE 11
EN TECHNICAL DATASHEET CONTACTING AFTER-SALES SERVICE The technical data containing the energy consumption data can be downloaded from the website: docs.hotpoint.eu You can find our contact details in the warranty manual. When contacting our Client After-sales Service, please state the codes provided on your product's rating plate.
PAGE 12
195157176.