Instruction for Use

5019 618 33044/B
1. Control panel
2. Grease filters
3. Grease filter handles
4. Light above cooker (according to the model)
5. Telescopic flue
To clean the grease filter
Clean the grease filter once a month.
1. Disconnect the electrical power supply.
2. Remove the grease filters - Fig. 1:
a - push the handles backwards
b - and then downwards.
3. After cleaning the grease filter refit in reverse order, making sure
the entire extraction surface is covered.
Fitting or replacing the carbon filter:
Change the carbon filter every six months.
1. Disconnect the electrical power supply.
2. Remove the grease filters (Fig. 1 - a, b).
3. Fit the filter/s over the motor: Align the pins R on the cowl with
the slots S, then turn the filter clockwise until it locks in place.
4. Carry out in the reverse order to remove.
5. Refit the grease filters.
Replacing bulbs
1. Disconnect the electrical power supply.
2. Remove the grease filters (Fig. 1 - a, b).
3. Remove the burnt-out bulb.
Replace using 40W max E14 bulbs only.
4. Refit the grease filters.
Halogen lamps:
Use a small screwdriver or other suitable
tool to prise off the cover. Refit the cover.
5. Use only max 40 W - E14 bulbs or
max 20 W halogen bulbs
(depending on the model), taking
care not to touch them with your
hands.
CONTROL PANEL
Light switch.
The switch has two positions
(lights OFF - lights ON).
To switch on the lights: move the switch to the right.
Extraction speed selection switch.
The extraction speed switch has different settings, depending on
the amount of steam and fumes.
To increase the extraction speed: move the switch to the right.
Fig.1
Fig.2
GB
CZ SK H
PL
RUS
BG
RO