Setup and user guide

ManualsBrandsWhirlpool ManualsOtherHSCX 90422

1. On/O button (Reset if long

pressed)

2. Programme button (Water

conductivity setting if long

pressed)

3. Cycle end alert

4. Key lock

5. Steam option

6. Knob (Turn to select / Press to

conrm)

7. Start delay

8. Drying time

9. Dryness level

10. Options button

11. Start / Pause button

12. Display

13. Programmes area

CONTROL PANEL

1. Worktop

2. Control panel

3. Water tank

4. Door

5. Door handle

6. Door lter (behind door)

7. Bottom lter (behind ap)

8. Adjustable feet (4)

DAILY REFERENCE

GUIDE

PRODUCT DESCRIPTION

APPLIANCE

2. 7.3. 8.

12.

4. 9.5. 10. 11.6.

13.

THANK YOU FOR PURCHASING A WHIRLPOOL

PRODUCT

To receive more comprehensive help and support, please

WWW

You can download the Safety Instructions and

the Use and Care Guide by visiting our website

docs. whirlpool. eu and following the

instructions on the back of this booklet.

Before using the appliance carefully read the Health and Safety guide.

Summary of content (8 pages)

PAGE 1
EN DAILY REFERENCE GUIDE THANK YOU FOR PURCHASING A WHIRLPOOL PRODUCT To receive more comprehensive help and support, please register your product at www.‌whirlpool.‌eu‌/‌register WWW You can download the Safety Instructions and the Use and Care Guide by visiting our website docs.‌whirlpool.‌e u and following the instructions on the back of this booklet. Before using the appliance carefully read the Health and Safety guide. PRODUCT DESCRIPTION APPLIANCE 1. Worktop 2. Control panel 3. Water tank 4.
PAGE 2
FIRST TIME USE BEFORE USING THE DRYER CHECK DRAIN HOSE AND WATER TANK Make sure that the drain hose on the back of the dryer is fixed correctly, either to the dryer’s water tank (see picture), or to your domestic sewage system (see Installation guide). Also make sure that the water tank is correctly inserted.
PAGE 3
EN Turn the knob to select the desired drying time. Confirm it by pressing the knob. Set dryness level, if needed If you want to change the dryness level, make sure that the Dryness level button « lights up. Turn the knob to select the desired dryness level, then press the knob to confirm. Select options, if needed If you want to select additional options, make sure that the Options button « lights up. The options which are selectable for your programme are indicated by lighting arrows.
PAGE 4
HINTS AND TIPS Respect the care labels of your laundry; make sure that it is appropriate for being treated in a dryer. CARE LABELS The dots indicate the temperature degree for drying the laundry. Normal temperature Reduced temperature ADAPTING THE DRYER TO WATER CONDUCTIVITY The drying results are affected by the conductivity of the water used during washing.
PAGE 5
EN PROGRAMME CHART ECO COTTON max — COTTON Selectable by options button — Rapid Gentle Fresh Care Drying time Steam option Dryness level Max Load (Kg) Programme Care Labels Directly selectable — — — max — — MIXED 2.0 — SYNTHETICS — — — — — 3.5 — DELICATES WOOL EXCELLENCE BIG ITEMS 2.5 — — 1.0 — — 3.0 — — — — — — — — — — — — — — — AIRING STEAM REFRESH DRYING TIME Selectable / Optional — max — — 1.
PAGE 6
PROGRAMMES Make sure that your laundry is suitable to be treated in a tumble dryer. Refer to HINTS AND TIPS / Care labels. ECO COTTON For drying normally wet cotton laundry. Standard cotton programme, suitable to dry normal wet cotton laundry. Most efficient programme in terms of energy consumption for drying cotton laundry. The values on the Energy Label are based on this programme. COTTON For drying cotton laundry. MIXED For drying mixed laundry made of cotton, linen, synthetic fibres and their blends.
PAGE 7
EN Cupboard dry (dry enough to be placed in a cupboard at the end of the drying cycle) Extra dry (maximum dryness level) and confirm by pressing the knob. OPTIONS WHICH ARE SELECTABLE WITH THE OPTIONS BUTTON Fresh Care Helps to prevent creasing if you cannot unload the laundry soon after programme end. The dryer starts to tumble the laundry periodically a few minutes after programme end. This tumbling will last up to approximately 12 hours after end of the programme.
PAGE 8
CARE AND MAINTENANCE WARNING Switch off and unplug the dryer before doing any cleaning and maintenance. EMPTY WATER TANK AFTER EACH DRYING CYCLE Hold the handle and carefully pull out the water tank. Hold the full water tank with both hands. Empty the water and insert the container by pushing it back into place. Make sure that it is properly inserted. Caution, the water in the water tank can still be hot. CLEAN THE BOTTOM FILTER AFTER ABOUT EVERY FIFTH DRYING CYCLE Be Careful.