Instruction for Use

24
GB
Something Wrong with your Cooker?
PROBLEM CHECK
Burner will not light:
Burner ports Ignitor
Hotplate burner
If all burners fail to ignite:
Check that sparks appear at the burners; a clicking
noise should be heard.
If not;
Check that the electricity supply is turned on.
If the electricity supply has failed, the hotplate, grill
and top oven burners can be lit by a match.
I
f only one burner fails to ignite:
Check that the burner is dry and that spillage of food
or cleaning fluid remains are not affecting the ignitor
or burner ports.
Clean away any debris with a dry nylon brush such as
an old toothbrush. If a wire wool pad has been used
for cleaning around the burner ensure the ignitor is
free from any stray strands. Any water on the burner
should be dried with a cloth or kitchen towel.
On the hotplate make sure that all the burner parts
are correctly seated.
HOB GAS BURNER
SAFETY DEVICE
ELECTRONIC
LIGHTING DEVICE
Hob burner ignites, but goes out when
control knob is released:
Models with Hob Gas Burner Safety Devices to Prevent Leaks*
These models can be identified by the presence
of the device itself. Since the hob burners are equipped
with a safety device, you must hold the control knob for
about 3-7 seconds after the burner has been lighted to
allow the gas to pass until the safety thermocouple has
heated.
*(only available on certain models).