IDL 40 Geschirrspuler Installations und Gebrauch Dishwasher Installation and use
IDL 40 Geschirrspuler Informationen für Installation und Gebrauch 1 Dishwasher Instructions for installation and use 11
Die Sicherheit - Eine gute Gewohnheit und unsere Verpflichtung ACHTUNG Lesen Sie bitte die Hinweise dieser Anleitung aufmerksam durch. Sie enthalten wichtige Angaben über die Sicherheit bei der Installation, Benutzung und Wartung des Gerätes. Dieses Gerät entspricht den folgenden EGRichtlinien: - 73/23/EWG (Niederspannung) und nachfolgenden Änderungen; - 89/336/EWG (elektromagnetische Verträglichkeit) und nachfolgenden Änderungen. - 97/17/CE (Etikettierung) 1.
Aus der Nähe betrachtet (Innenraum) E G F H J K I L Oberkorb Unterer Sprüharm Oberer Sprüharm Salzbehälterdeckel Höhenverstellung des Korbes Filtereinsatz Unterkorb Reiniger- und Klarspülbehälter Technische daten Breite Tiefe Höhe Fassungsvermögen Anschluß-Wasserdruck Betriebsspannung Leistung Sicherung DE cm. 45 cm. 60 cm.
Salz.... Salz Der Gehalt an Salzen im Wasser variiert je nach Ortschaft. Je höher der Salzgehalt, desto höher die Wasserhärte. Würde hartes Wasser in den Geschirrspüler eingelassen, käme es zu Verkrustungen auf dem Geschirr. Dank des Entkalkers, in den Geschirrspüler-Spezialsalz eingefüllt werden muß, wird das Wasser vom Kalk befreit. Einfüllen von Salz in den Entkalker Verwenden Sie bitte nur Spezialsalz für Geschirrspüler. Der Salzbehälter befindet sich unter dem Unterkorb und wird wie folgt gefüllt: 1.
Reiniger-und Klarspüler .... Reiniger Der Einsatz spezifischer Reiniger für Geschirrspüler garantiert bessere Reinigungsergebnisse. Füllen Sie den Reiniger vor Beginn des Spülgangs gemäß den Anweisungen des Abschnitts "Programm-Tabelle" ein. Der Reinigerbehälter befindet sich im Innern der Tür. Einfüllen des Reinigers Drücken Sie die Taste "B”, um den Deckel “A" zu öffnen. Füllen Sie beide Kammern "C ", "D" bis zum Rand mit Spülmittel. Schließen Sie daraufhin den Deckel, bis er einrastet.
Einsortieren des Geschirrs Beschickungsbeispiele Entfernen Sie die gröbsten Speisereste, bevor Sie das Geschirr in die Körbe einsortieren, damit die Filter nicht verstopfen, was die Reinigungskraft herabsetzen würde. Stark verschmutzte Töpfe und Pfannen mit angetrockneten Speiseresten sollten vorher eingeweicht werden. Sie vermeiden hierdurch, Spülgänge wiederholen zu müssen. Ziehen Sie die Körbe ganz heraus, Sie erleichtern sich hierdurch das Einsortieren des Geschirrs.
Inbetriebnahme des Gerätes Einstellen eines Spülprogramms Nach Abschluss sämtlicher Arbeitsschritte gemäß den Hinweisen vorstehender Abschnitte, und der Kontrolle, dass der Wasserhahn auch vollständig aufgedreht wurde, drücken Sie die auf der Schalterblende befindliche ON/OFF-Taste "A", die Anzeigeleuchte "B" leuchtet auf. Der Geschirrspüler ist somit elektrisch eingeschaltet; wählen Sie nun ein Spülprogramm.
Programmtabelle Spülen im Geschirrspüler garantiert höchste Hygienesicherheit und Sauberkeit. 6SOSURJUDPP +LQZHLVH ]XU 3URJUDPPZDKO %HVFKUHLEXQJ GHV 6SOJDQJV Normal verschmutztes Geschirr und Töpfe. Normaler täglicher Abwasch Verlängerter Spülgang bei 60°C Kaltes Klarspülen Heißes Klarspülen bei 70°C Trocken Öko-Sparprogramm mit niedrigem Energieverbrauch, geeignet für normal verschmutztes Geschirr.
Tips zum Sparen - Dosieren Sie die richtige Reinigermenge: Durch Einfüllen einer zu hohen Reinigermenge wird Ihr Geschirr nicht sauberer, Sie belasten hierdurch nur die Umwelt. - Schalten Sie den Geschirrspüler erst ein, wenn er voll beladen ist. Sie sparen hierdurch wertvolle Energie. Schalten Sie evtl. das Einweichprogram ein, um Geruchsbildung oder ein Antrocknen der Speisereste zu vermeiden.
Reinigung und Pflege Die Siebkomposition 1 Wenn Sie jederzeit ein gutes A B 2 Reinigungsergebnis wünschen, müssen Sie die Siebkomposition sauber halten. Anhand des Siebes wird das Spülwasser von Speiseresten C gereinigt und perfekt gefiltert in Umlauf gebracht. Es ist daher empfehlenswert, nach jedem Spülgang die gröberen Essensreste, die Sie im Grobsieb „C“ und im halbrunden Sieb „A“ finden, zu entfernen. Zum Herausnehmen brauchen Sie nur den Griff des Filtereinsatzes nach oben zu ziehen.
Installation Aufstellen Stellen Sie das Gerät an der gewünschten Stelle auf. Das Gerät kann mit den Seitenteilen, oder mit der Rückseite an angrenzende Möbelteile oder an die Wand angelehnt werden. Der Geschirrspüler ist mit Zufuhr- und Ablaufschläuchen bestückt, die, je nach den Installationsgegebenheiten, sowohl nach rechts als auch nach links geleitet werden können.
Safety Is a Good Habit to Get Into NOTICE Carefully read the instructions contained in this manual, as they provide important information which is essential to safe and proper installation, use and maintenance of the appliance. This appliance complies with the following EEC directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications; - 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications. - 97/17/EEC Labelling 1.Carefully dispose of the packing material. 2.
Close-up View (Interior) E G F H J K I L Bottom Sprayer Arm Upper Rack Salt Container Cap Top Sprayer Arm Washing Filter Rack Height Adjustor Detergent and Rinse Aid Dispenser Lower Rack Technical characteristics Width cm. 45 Depth cm. 60 Height cm.
Salt ...... Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water. Loading the Salt into the Softener Always use salt intended for use with dishwashers. The salt container is located beneath the lower rack and should be filled as follows: 1.
Detergent and Rinse Aid .... Rinse Aid This product makes dishes sparkle more as it improves their drying. The rinse aid container is situated on the inside of the appliance door; you should refill it when you see the container is empty by means of indicator “D”. (If your dishwasher is fitted with a “low rinse aid” indicator light, fill the container up when the indicator light flashes or lights up). Detergent Detergent specifically intended for use with dishwashers must be used.
Loading the Dishwasher Load examples Before placing the dishes in the dishwasher, remove the larger food particles to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed. This will eliminate the need for extra wash cycles. Pull out the racks to facilitate loading the dishwasher.
Turning on the Appliance First of all. Turn on the water tap completely and press ON-OFF button "A". you will hear a short beep and indicator light "B" lights up. Now the appliance is on and awaiting instructions. If you have left out a dish… You can interrupt a wash cycle by pressing the ON-OFF button, then place the dishes you had left out into the appliance, which will start up from where it was interrupted when you turn it back on. Starting and selecting the cycle.
Wash Cycle Table Dishwasher washing guarantees your dishes will be cleaned in a hygienic setting for safer, cleaner results. &\FOH &\FOH VHOHFWLRQ LQVWUXFWLRQV &\FOH GHVFULSWLRQ 'HWHUJHQW IRU SUH ZDVK ZDVK 5LQVH $LG :DVK F\FOH GXUDWLRQ WROHUDQFH Normally dirty pans and dishes. Standard daily cycle. Wash at 60°C. Cold rinse Rinse with hot water at 70°C. Drying. JU Environmentally-friendly cycle, with low energy consumption levels, suitable for normally dirty pans and dishes.
Energy Saving Tips - It is important to try and run the dishwasher when it is fully loaded in order to save on energy. In order to prevent odors from forming and food from caking onto the dishes, you can run the hold cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are.
Cleaning and Special Maintenance The filter assembly If you want consistent good results from your dishwasher, you need to clean the filter 1 assembly. The food particles are A B 2 removed from the wash water, allowing it to be recirculated during the cycle, filtered perfectly. For this reason, it is a good idea C to remove the larger food particles trapped inside the cup “C” and the semi-circular filter A after each wash; pull the cup handle upwards to remove them. Just rinse them under running water.
Installation Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation. Levelling the Appliance Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level.
Merloni Elettrodomestici P06/2004 - 195045049.00 - Xerox Business Services - DocuTech Viale Aristide Merloni 47 60044 Fabriano Italy Tel +39 0732 6611 Fax +39 0732 662501 www.merloni.