Instruction for Use

EN5
Disposal of packing
The packing material is 100% recyclable and marked with the recycling symbol ( ). The various parts of the packing must not be dispersed in the environment, but
disposed of in compliance with local regulations.
Disposal
This appliance is marked in conformity with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
By ensuring that this appliance is correctly disposed of, the user can help prevent potentially negative consequences for the environment and the health of people.
The symbol on the appliance or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to an
appropriate collection point for recycling WEEE.
- This appliance, intended to come into contact with food products, complies with Regulation ( ) no. 1935/2004, and has been designed, manufactured and
marketed in conformity with the safety requirements of “Low Voltage” Directive 2006/95/EC (replacing 73/23/EEC as amended) and protection requirements of
“EMC” Directive 2004/108/EC.
SAFEGUARDING THE ENVIRONMENT
DECLARATION OF CONFORMITY
INSTALLATION
Min. 40 cm
Min. 10 cm
After unpacking the product, check for
any damage during transport. In case
of problems, contact the dealer or the
After-Sales Service.
For buit-in dimensions and installation
instruction see the pictures in this
paragraph.
A minimum distance must be
maintained between the hob and the
hood above it. Please refer to the user
manual of the hood for more
informations.
R = Min. 6,5 mm
Max. 8 mm
490 mm
560 mm
0
+2
0
+2
Min. 70 mm
6 mm
min 20 mm
513 mm
583 mm
0
+2
0
+2
560 mm
490 mm
R = 11,5 mm
0
+2
0
+2
R = Min. 6,5 mm
FLUSH INSTALLATION
482 mm
552 mm
42/46 mm
510 mm
580 mm
Min. 70 mm
STANDARD INSTALLATION
580 X 510 mm