Instruction for Use

EN14
Hold function
With the hold function you can temporarily hold the cooking processes currently
underway to prevent food from burning or liquids overflowing from pots due to
unwanted overboiling. When the hold function is enabled, all cooking areas switched
on are brought to the same keep-warm temperature as the special keep-warm
function.
Enabling and removing the hold function
Press the key to enable the hold function. A dot lights up on the key to indicate it
has been switched on. Two flashing vertical bars appear on the displays of all cooking
zones. If the gentle heat function is being used in one of the cooking zones, the keep-
warm temperature will be the same as the gentle heat temperature, given that the
latter is the cooler of the two. To switch off the hold function, press the hold key again.
All levels previous to the hold function being switched on are restored when the
hold function is removed. Any times set using the timer will continue to count down
during the entire time the hold function is enabled. The hold function switches off
automatically after 2 hours. DO NOT LEAVE THE HOB UNATTENDED FOR ANY REASON
WHATSOEVER EVEN WHEN THE HOLD FUNCTION IS ON.