Instruction for Use

EN15
To switch on the hob, press and hold the key for at least two seconds. A dot lights up next
to the key.
A beep sounds when the hob switches on. The display shows 0 for each cooking zone.
It the hob has already been on and the cooking zones have not cooled to the appropriate
temperature, an Hsymbol is shown on the display for any cookings zones that are still hot.
Select the required cooking zone within 25 seconds, by pressing the or keys to switch
it on.
The cooking zone will stay selected for 6 seconds. After this, you need to select it again by
pressing or .
The hob features special functions for each different cooking zone.
If within about 25 seconds none of the cooking zones are used, the hob switches itself off
automatically for safety reasons.
IMPORTANT:for safety reasons, the hob is equipped with an automatic cut-off function
after 1 hour at the maximum power setting or after 6 hours at minimum power or gentle
heat setting.
During normal use of the cooking zones, once a zone has been selected the power level can
be set from level 1 to 9 using the or keys. Pressing the key from 0 will set the hob
straight to 9.
Pressing the and keys at the same time switches off the cooking zone.
After the cooking zone has been switched off, an H appears on the associated display to
indicate that it is still hot.
This will stay on until the temperature in the cooking zone falls to a safe level.
If the hob is switched off while the hotplates are still warm, the H sign will stay on until the
cooking zone has cooled.
To use the special functions when the cooking zone is in use, press the relative key on the
special functions bar. To help understand how the appliance works, a deep beep sounds
when you try to select an operation that is not allowed. The special fast boiling and gentle
heat functions can be enabled separately for each cooking zone. The special gentle heat
function is indicated with clockwise rotation movement on the display of the cooking zones
it has been enabled for.
The fast boiling function is indicated on the display with three horizontal bars that light up
one after the other from the bottom up.
To change the special function simply select the required cooking zone and press the
relative key for the new special function you want to set.
INSTRUCTIONS FOR USE