IN600S/IN900S Instruction Manual Home Appliances
CHARACTERISTICS Dimensions 260 ø 150 280 0÷152 L Hood Type L IN600S 598 IN900S 898 Components 12e 8 9 20 Q.ty Product Components 1 Hood Body, complete with: Controls, Light, Blower, Filters 1 Directional Air Outlet grille 1 Reducer Flange ø 150-120 mm 1 Closing element Ref. 12a 12e Q.ty Installation Components 4 Screws 4,2 x 44,4 2 Screws 2,9 x 9,5 Ref. 1 8 9 12a 1 Q.
ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. • When opening the sliding carriage for the first time after installing the hood, pull it out briskly until it clicks.
MAINTENANCE Grease filters CLEANING METAL SELF-SUPPORTING GREASE FILTERS The filters must be cleaned every 2 months of operation, or more frequently with heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time, after disconnecting the relative fastening elements. • Wash the filters, taking care not to bend them. Allow them to dry before refitting. • When refitting the filters, make sure that the handle is visible on the outside.
Odour filters (Recirculation version) REPLACING ACTIVATED CHARCOAL FILTERS These filters are not washable and cannot be regenerated, and must be replaced every 4 months of operation, or more frequently with heavy usage. • Remove the grease filters. • Remove the saturated activated charcoal filters as shown (A). • Fit new filters (B). • Replace the grease filters.
This appliance conforms to European Low Voltage Directive 73/23/CEE governing electrical safety, European Directive 89/336/ CEE on Electromagnetic Compatibility and Directive 93/68/CEE regarding CE Marking.
Home Appliances Star Service Hotline 24069138 www.whirlpool.com.
