Instructions for use WASHING MACHINE Contents GB Installation, 2-3 GB English,1 DE Deutsch,37 I Italiano,13 NL Nederlands,49 F Français,25 ES Español,61 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine and starting a wash cycle, 4-5 Control panel Indicator lights Starting a wash cycle Wash cycles, 6 Table of wash cycles PT Português,73 Personalisation, 7 Setting the temperature Setting the spin speed Func
Installation GB This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating.
Do not use extension cords or multiple sockets. Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; GB The cable should not be bent or compressed. The power supply cable must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these regulations are not respected.
Description of the washing machine and starting a wash cycle GB Control panel WASH CYCLE PROGRESS DELAY TIMER button DISPLAY ON/OFF button FUNCTION buttons with indicator lights TEMPERATURE Detergent dispenser drawer knob Detergent dispenser drawer: used to dispense detergents and washing additives (see Detergents and laundry). ON/OFF button: switches the washing machine on and off. WASH CYCLE knob: programmes the wash cycles. During the wash cycle, the knob does not move.
Indicator lights The indicator lights provide important information. This is what they can tell you: Wash cycle phase indicator lights Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress.
Wash cycles Table of wash cycles Wash cycles GB Description of the wash cycle Max. load Detergents Max. Max. (kg) Cycle temp.
Personalisation Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.
Detergents and laundry GB Detergent dispenser drawer Preparing the laundry Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. Divide the laundry according to: - the type of fabric/the symbol on the label - the colours: separate coloured garments from whites.
Precautions and tips This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety This appliance was designed for domestic use only.
Care and maintenance GB Cutting off the water and electricity supplies Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the washing machine The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see Assistance), make sure that the problem cannot be not solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. The appliance is not plugged into the socket fully, or is not making contact. There is no power in the house. The wash cycle does not start. The washing machine door is not closed properly.
Service Before calling for Assistance: Check whether you can solve the problem alone (see Troubleshooting); Restart the programme to check whether the problem has been solved; If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate. GB Always request the assistance of authorised technicians. Have the following information to hand: the type of problem; the appliance model (Mod.); the serial number (S/N).
Istruzioni per luso LAVABIANCHERIA Sommario I Italiano I Installazione, 14-15 Disimballo e livellamento Collegamenti idraulici ed elettrici Primo ciclo di lavaggio Dati tecnici Descrizione della lavabiancheria e avviare un programma, 16-17 Pannello di controllo Spie Avviare un programma Programmi, 18 Tabella dei programmi Personalizzazioni, 19 IWD 6103 Impostare la temperatura Impostare la centrifuga Opzioni Detersivi e biancheria, 20 Cassetto dei detersivi Ciclo candeggio Preparare la biancheria
Installazione I È importante conservare questo libretto per poterlo consultare in ogni momento. In caso di vendita, di cessione o di trasloco, assicurarsi che resti insieme alla lavabiancheria per informare il nuovo proprietario sul funzionamento e sui relativi avvertimenti. Leggere attentamente le istruzioni: ci sono importanti informazioni sullinstallazione, sulluso e sulla sicurezza. Disimballo e livellamento Disimballo 1. Disimballare la lavabiancheria. 2.
Collegamento del tubo di scarico 65 - 100 cm Collegare il tubo di scarico, senza piegarlo, a una conduttura di scarico o a uno scarico a muro posti tra 65 e 100 cm da terra; Non usare prolunghe e multiple. I Il cavo non deve subire piegature o compressioni. Il cavo di alimentazione deve essere sostituito solo da tecnici autorizzati. Attenzione! Lazienda declina ogni responsabilità qualora queste norme non vengano rispettate.
Descrizione della lavabiancheria e avviare un programma I Pannello di controllo Tasto PARTENZA RITARDATA Tasto ON/OFF Manopola Cassetto dei detersivi: per caricare detersivi e additivi (vedi Detersivi e biancheria). Tasto ON/OFF: per accendere e spegnere la lavabiancheria. Manopola PROGRAMMI: per impostare i programmi. Durante il programma la manopola resterà ferma. Tasti e spie OPZIONE: per selezionare le opzioni disponibili. La spia relativa allopzione selezionata rimarrà accesa.
Spie Le spie forniscono informazioni importanti. Ecco che cosa dicono: Spie fase in corso Una volta selezionato e avviato il ciclo di lavaggio desiderato, le spie si accenderanno progressivamente per indicarne lo stato di avanzamento: Spia oblò bloccato La spia accesa indica che loblò è bloccato per impedire lapertura; per aprire loblò è necessario che la spia sia spenta.
Programmi Tabella dei programmi Programmi I Descrizione del Programma Temp. max. (°C) Carico Velocità Detersivi max. (Kg) max. (giri al Prela- Lavag- Candeg- Ammor- Nor- Eco minuto) vaggio gio gina bidente male Time Durata ciclo Giornalieri 1000 1000 1000 1000 1000 1000 800 800 l - l l l l l l l l l l l l l l l l l l l l l l l 6 6 6 6 6 3,25 6 3,25 2,5 2 2,5 2 7 Lana: per lana, cachemire, ecc. 8 Seta/Tende: per capi in seta, viscosa, lingerie.
Personalizzazioni Impostare la temperatura Ruotando la manopola TEMPERATURA si imposta la temperatura di lavaggio (vedi Tabella programmi). La temperatura si può ridurre sino al lavaggio a freddo ( ). La macchina impedirà automaticamente di impostare una temperatura maggiore a quella massima prevista per ogni programma. Impostare la centrifuga Ruotando la manopola CENTRIFUGA si imposta la velocità di centrifuga del programma selezionato.
Detersivi e biancheria I Cassetto dei detersivi Preparare la biancheria Il buon risultato del lavaggio dipende anche dal corretto dosaggio del detersivo: eccedendo non si lava in modo più efficace e si contribuisce a incrostare le parti interne della lavabiancheria e a inquinare lambiente. Suddividere la biancheria secondo: - il tipo di tessuto / il simbolo sulletichetta. - i colori: separare i capi colorati da quelli bianchi. Vuotare le tasche e controllare i bottoni.
Precauzioni e consigli La lavabiancheria è stata progettata e costruita in conformità alle norme internazionali di sicurezza. Queste avvertenze sono fornite per ragioni di sicurezza e devono essere lette attentamente. Sicurezza generale Questo apparecchio è stato concepito esclusivamente per un uso di tipo domestico. recupero e riciclaggio dei materiali che li compongono ed impedire potenziali danni per la salute e l'ambiente.
Manutenzione e cura I Escludere acqua e corrente elettrica Pulire la pompa Chiudere il rubinetto dellacqua dopo ogni lavaggio. Si limita così lusura dellimpianto idraulico della lavabiancheria e si elimina il pericolo di perdite. La lavabiancheria è dotata di una pompa autopulente che non ha bisogno di manutenzione. Può però succedere che piccoli oggetti (monete, bottoni) cadano nella precamera che protegge la pompa, situata nella parte inferiore di essa.
Anomalie e rimedi Può accadere che la lavabiancheria non funzioni. Prima di telefonare allAssistenza (vedi Assistenza), controllare che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco. Anomalie: Possibili cause / Soluzione: La lavabiancheria non si accende. La spina non è inserita nella presa della corrente, o non abbastanza da fare contatto. In casa non cè corrente. Il ciclo di lavaggio non inizia. Loblò non è ben chiuso.
Assistenza Prima di contattare lAssistenza: Verificare se lanomalia può essere risolta da soli (vedi Anomalie e rimedi). Riavviare il programma per controllare se linconveniente è stato ovviato; In caso negativo, contattare il Numero Unico 199.199.199*. I Non ricorrere mai a tecnici non autorizzati. Comunicare: il tipo di anomalia; il modello della macchina (Mod.); il numero di serie (S/N).
Mode demploi LAVE-LINGE Sommaire FR Français FR Installation, 26-27 Déballage et mise à niveau Raccordements eau et électricité Premier cycle de lavage Caractéristiques techniques Description du lave-linge et démarrage dun programme, 28-29 Bandeau de commandes Voyants Démarrage dun programme Programmes, 30 Tableau des programmes Personnalisations, 31 IWD 6103 Sélection de la température Sélection de lessorage Fonctions Produits lessiviels et linge, 32 Tiroir à produits lessiviels Triage du lin
Installation FR Conserver ce mode demploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, veiller à ce quil suive toujours le lave-linge pour que son nouveau propriétaire soit informé sur son mode de fonctionnement et puisse profiter des conseils correspondants. Une bonne mise à niveau garantit la stabilité de lappareil et évite quil y ait des vibrations, du bruit et des déplacements en cours de fonctionnement.
Raccordement du tuyau de vidange 65 - 100 cm Raccorder le tuyau dévacuation, sans le plier, à un conduit dévacuation ou à une évacuation murale placés à une distance du sol comprise entre 65 et 100 cm; Nutiliser ni rallonges ni prises multiples. FR Le câble ne doit être ni plié ni trop écrasé. Le câble dalimentation ne doit être remplacé que par des techniciens agréés. Attention! Nous déclinons toute responsabilité en cas de non-respect des normes énumérées ci-dessus.
Description du lave-linge et démarrage dun programme FR Bandeau de commandes Voyants Touche DÉROULEMENT CYCLE DÉPART DIFFÉRÉ Touche MARCHE/ Touches avec voyants AFFICHEUR ARRÊT FONCTION Bouton PROGRAMMES Tiroir à produits lessiviels: pour charger les produits lessiviels et les additifs (voir Produits lessiviels et linge). Touche MARCHE/ARRÊT: pour allumer ou éteindre le lave-linge. Bouton PROGRAMMES: pour sélectionner les programmes. Pendant le programme, le bouton ne tournera pas.
Voyants FR Les voyants fournissent des informations importantes. Voilà ce quils signalent:. Voyants phase en cours Une fois que le cycle de lavage sélectionné a démarré, les voyants sallument progressivement pour indiquer son stade davancement: Lavage Rinçage Essorage Vidange Fin de Lavage Touches fonction et voyants correspondants La sélection dune fonction entraîne lallumage du voyant correspondant.
Programmes Tableau des programmes Programmes FR Description du Programme Charge maxi Vitesse Detersivi Temp. (Kg) maxi maxi.
Personnalisations Sélection de la température FR Tourner le bouton TEMPÉRATURE pour sélectionner la température de lavage (voir Tableau des programmes). La température peut être abaissée jusquau lavage à froid ( ). La machine interdira automatiquement toute sélection dune température supérieure à la température maximale prévue pour chaque programme. Sélection de lessorage Tourner le bouton ESSORAGE pour sélectionner la vitesse dessorage du programme sélectionné.
Produits lessiviels et linge FR Tiroir à produits lessiviels Triage du linge Un bon résultat de lavage dépend aussi dun bon dosage de produit lessiviel: un excès de lessive ne lave pas mieux, il incruste lintérieur du lave-linge et pollue lenvironnement. Trier correctement le linge daprès: le type de textile / le symbole sur létiquette. les couleurs: séparer le linge coloré du blanc. Vider les poches et contrôler les boutons.
Précautions et conseils Ce lave-linge a été conçu et fabriqué conformément aux normes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attentivement. Sécurité générale Cet appareil est conçu pour un usage domestique.
Entretien et soin FR Coupure de larrivée deau et du courant Fermer le robinet de leau après chaque lavage. Cela réduit lusure de linstallation hydraulique du lave-linge et évite tout danger de fuites. Nettoyage de la pompe Le lave-linge est équipé dune pompe autonettoyante qui nexige aucune opération dentretien. Il peut toutefois arriver que de menus objets (pièces de monnaie, boutons) tombent dans la préchambre qui protège la pompe, placée en bas de cette dernière.
Anomalies et remèdes Il peut arriver que le lave-linge ne fonctionne pas bien. Avant dappeler le Service de dépannage (voir Assistance), contrôler sil ne sagit pas par hasard dun problème facile à résoudre à laide de la liste suivante. FR Anomalies: Causes / Solutions possibles: Le lave-linge ne sallume pas. La fiche nest pas branchée dans la prise de courant ou mal branchée. Il y a une panne de courant. Le cycle de lavage ne démarre pas. Le hublot nest pas bien fermé.
Assistance Avant dappeler le service après-vente: Vérifier si on ne peut pas résoudre lanomalie par ses propres moyens (voir Anomalies et Remèdes); Remettre le programme en marche pour contrôler si linconvénient a disparu; Autrement, contacter le Centre dAssistance technique agréé au numéro de téléphone indiqué sur le certificat de garantie. FR Ne jamais sadresser à des techniciens non agréés. Communiquer: le type de panne; le modèle de lappareil (Mod.); son numéro de série (S/N).
Bedienungsanleitungen WASCHVOLLAUTOMAT INHALTSVERZEICHNIS DE Deutsch DE Installation 38-39 Auspacken und Aufstellen Wasser- und Elektroanschlüsse Erster Waschgang Technische Daten Beschreibung des Waschvollautomaten und Starten eines Waschprogramms 40-41 Bedienblende Kontrollleuchten Starten eines Waschprogramms Waschprogramme, 42 Programmtabelle Personalisierungen 43 IWD 6103 Temperatureinstellung Schleudereinstellung Funktionen Waschmittel und Wäsche 44 Waschmittelschublade Bleichen Vorsortieren
Installation DE Es ist äußerst wichtig, diese Bedienungsanleitung sorgfältig aufzubewahren, um sie jederzeit zu Rate ziehen zu können. Sorgen Sie dafür, dass sie im Falle eines Umzugs oder einer Übergabe an einen anderen Benutzer das Gerät stets begleitet, damit auch der neue Inhaber die Möglichkeit hat, diese zu Rate zu ziehen.
Anschluss des Ablaufschlauches 65 - 100 cm Schließen Sie den Ablaufschlauch ohne ihn dabei abzuknicken an einen geeigneten Abfluss an. Die Mindestablaufhöhe beträgt 65 - 100 cm (gemessen vom Boden), oder hängen Sie diesen mittels des Schlauchhalters gesichert in ein Becken oder Wanne ein; Befestigen Sie diesen mittels des mitgelieferten Schlauchhalters z.B. an einen Wasserhahn (siehe Abbildung). Das freie Ablaufschlauchende darf nicht unter Wasser positioniert werden.
Beschreibung des Waschvollautomaten und Starten eines Waschprogramms DE Bedienblende Kontrollleuchten Taste STARTZEIT- PROGRAMMABLAUF VORWAHL Taste ON/OFF DISPLAY Tasten mit Kontrollleuchten FUNKTIONEN Wählschalter Wählschalter PROGRAMME Waschmittelschublade: für Waschmittel und Zusätze (siehe Waschmittel und Wäsche). Taste ON/OFF: Zum Ein- und Ausschalten Ihres Waschvollautomaten. Wählschalter PROGRAMME: Zur Wahl der Waschprogramme.
Kontrollleuchten Die Kontrollleuchten liefern wichtige Hinweise. Sie signalisieren: Laufende Programmphase Wurde das Waschprogramm gewählt und gestartet, leuchten die Kontrollleuchten nach und nach auf, und zeigen so den jeweiligen Programmstand an. Kontrollleuchte Gerätetür gesperrt: Ist diese Kontrollleuchte eingeschaltet, bedeutet dies, dass das Bullauge gesperrt ist; warten Sie, bis die Leuchte erlischt, um das Bullauge zu öffnen (etwa 3 Minuten).
Waschprogramme Programmtabelle Waschprogramme DE Beschreibung des Programms Max. Max. Max.
Personalisierungen Temperatureinstellung DE Drehen Sie den Wählschalter TEMPERATUREN, um die Waschtemperatur einzustellen (siehe Programmtabelle). herabgesetzt werden. Die Temperatur kann bis auf Kaltwäsche Der Waschvollautomat verhindert automatisch die Einstellung einer höheren Schleuderstufe, sollte diese die für das jeweilige Programm vorgeschriebene Höchstgeschwindigkeit übersteigen.
Waschmittel und Wäsche DE Waschmittel und Wäsche Vorsortieren der Wäsche Ein gutes Waschergebnis hängt auch von einer korrekten Waschmitteldosierung ab: Eine zu hohe Dosierung bedeutet nicht unbedingt reinere Wäsche, sie trägt nur dazu bei, die Maschineninnenteile zu verkrusten und die Umwelt zu belasten. Sortieren Sie die Wäsche nach: - Gewebeart / Waschetikettensymbol. - und Farben: Buntwäsche von Weißwäsche trennen. Entleeren Sie alle Taschen.
Vorsichtsmaßregeln und Hinweise Der Waschvollautomat wurde nach den strengsten internationalen Sicherheitsvorschriften entworfen und gebaut. Nachstehende Hinweise werden aus Sicherheitsgründen geliefert und sollten aufmerksam gelesen werden. Allgemeine Sicherheit Dieses Gerät wurde ausschließlich für den Einsatz im privaten Haushalt konzipiert.
Reinigung und Pflege DE Abstellen der Wasser- und Stromversorgung Drehen Sie den Wasserhahn nach jedem Waschvorgang zu. Hierdurch wird der Verschleiß der Wasseranlage verringert und Wasserlecks vorgebeugt. Ziehen Sie den Netzstecker aus der Steckdose, bevor Sie Ihren Waschvollautomaten reinigen. Reinigung des Gerätes Die Gehäuseteile und die Teile aus Gummi können mit einem mit warmer Spülmittellauge angefeuchteten Tuch gereinigt werden.
Störungen und Abhilfe Bei Funktionsstörung: Bevor Sie sich an den Technischen Kundendienst wenden (siehe Kundendienst), vergewissern Sie sich zuerst, ob es sich nicht um eine Kleinigkeit handelt, die Sie selbst beheben können. Ziehen Sie hierzu nachstehendes Verzeichnis zu Rate. Störungen: Mögliche Ursachen / Lösungen: Der Waschvollautomat schaltet sich nicht ein. Der Stecker steckt nicht in der Steckdose, oder nicht so, dass der Kontakt hergestellt wird. Der Strom ist ausgefallen.
Kundendienst Bevor Sie sich an den Kundendienst wenden: Sollten einige Kontrollen vorab selbst durchgeführt werden (siehe Störungen und Abhilfe); Starten Sie daraufhin das Programm erneut, um sicherzustellen, dass die Störung auch wirklich behoben wurde; Ist dies nicht der Fall, dann kontaktieren Sie den autorisierten Kundendienst unter der auf dem Garantieschein befindlichen Telefonnummer. DE Wenden Sie sich auf keinen Fall an nicht autorisierte Techniker.
Gebruiksaanwijzing WASAUTOMAAT Inhoud NL Nederlands NL Installatie, 50-51 Uitpakken en waterpas zetten Hydraulische en elektrische aansluitingen Eerste wascyclus Technische gegevens Beschrijving van de wasautomaat en starten van een programma, 52-53 Bedieningspaneel Controlelampjes Een programma starten Programmas, 54 Programmatabel Persoonlijke instellingen, 55 IWD 6103 Instellen van de temperatuur Instellen van de centrifuge Functies Wasmiddelen en wasgoed, 56 Wasmiddelbakje Bleekcyclus Voorbere
Installatie NL Het is belangrijk deze handleiding te bewaren voor latere raadpleging. In het geval u het apparaat verkoopt, of u verhuist, moet het boekje bij de wasautomaat blijven zodat de nieuwe gebruiker de functies en betreffende raadgevingen kan doornemen. Een correcte nivellering geeft de machine stabiliteit en voorkomt trillingen, lawaai en het zich verplaatsen van de automaat tijdens de werking.
Aansluiting van de afvoerbuis 65 - 100 cm Verbind de buis, zonder hem te buigen, aan een afvoerleiding of aan een afvoer in de muur tussen de 65 en 100 cm van de grond Gebruik geen verlengsnoeren of dubbelstekkers. NL Het snoer mag niet gebogen of samengedrukt worden. De voedingskabel mag alleen door een bevoegde installateur worden vervangen. Belangrijk! De fabrikant kan niet aansprakelijk worden gesteld wanneer deze normen niet worden nageleefd.
Beschrijving van de wasautomaat en starten van een programma NL Bedieningspaneel Controlelampjes Toets UITGESTELDE START ON/OFF toets Toetsen met controlelampjes FUNCTIE TEMPERATUUR KNOP Wasmiddelbakje PROGRAMMAKNOP Wasmiddelbakje: voor wasmiddelen en wasversterkers (zie Wasmiddelen en wasgoed). Toets ON/OFF: voor het in- en uitschakelen van de wasautomaat. PROGRAMMAKNOP: voor het instellen van de programmas. Gedurende het programma blijft de knop stilstaan.
Controlelampjes De controlelampjes geven belangrijke informatie. Ze geven informatie over: Controlelampjes lopende fase Als u de gewenste wascyclus heeft geselecteerd en gestart gaan de controlelampjes één voor één aan om te tonen op welk punt de cyclus is: Controlelampje deur geblokkeerd: Als het controlelampje aan is betekent het dat de deur is geblokkeerd om te verhinderen dat hij per ongeluk wordt geopend. Om het deurtje te openen moet u wachten tot het controlelampje uitgaat (wacht circa 3 minuten).
Programmas Programmatabel Programmas NL Beschrijving van het Programma Maximale Temp (°C) Maximale Maximaal Wasmiddel lading (kg) toerental (toeren per Voor- Was- Bleek- WasverEco Normaal minuut) Time was sen middel zachter Duur cyclus Dagelijkse was 1000 1000 1000 1000 1000 1000 800 800 l - l l l l l l l l l l l l l l l l l l l l l l l 6 6 6 6 6 6 2,5 2,5 3,25 3,25 2 2 9 Jeans 40° 30° 40° 600 0 800 - l l l - l l l 1,5 1 3 - 10 30° 800 - l - l 1,5 - 30° 30° 600 600 - l l
Persoonlijke instellingen Instellen van de temperatuur Door aan de TEMPERATUURKNOP te draaien kunt u de wastemperatuur instellen (zie Programmatabel). De temperatuur kan verlaagd worden tot aan koud wassen ( ). De machine voorkomt dat u een temperatuur instelt die hoger is dan het maximum voorzien voor dat programma. Instellen van de centrifuge Door aan de CENTRIFUGEKNOP te draaien stelt u de snelheid van de centrifuge van het gekozen programma in.
Wasmiddelen en wasgoed NL Wasmiddelbakje Voorbereiden van het wasgoed Een goed wasresultaat hangt ook af van de juiste dosis wasmiddel: te veel wasmiddel maakt het wassen niet beter. Het wasmiddel blijft aan de binnenzijde van de wasautomaat zitten en zorgt voor het vervuilen van het milieu. Gebruik nooit wasmiddelen voor handwas aangezien die te veel schuim vormen.
Voorzorgsmaatregelen en advies De wasmachine is ontworpen en geproduceerd volgens de internationale veiligheidsnormen. Deze aanwijzingen zijn voor uw eigen veiligheid geschreven en moeten aandachtig worden doorgenomen. Algemene veiligheid Dit apparaat is uitsluitend ontworpen voor huishoudelijk niet-professioneel gebruik.
Onderhoud en verzorging NL Afsluiten van water en stroom Reinigen van de pomp Sluit na iedere wasbeurt de kraan af. Hiermee beperkt u slijtage van de waterinstallatie van de wasmachine en voorkomt u lekkage. De wasautomaat is voorzien van een zelfreinigende pomp en hoeft dus niet te worden onderhouden. Het kan echter gebeuren dat kleine voorwerpen (muntjes, knopen) in het voorvakje dat de pomp beschermt en zich aan de onderkant ervan bevindt, terechtkomen.
Storingen en oplossingen Het kan gebeuren dat de wasautomaat niet werkt. Voor u contact opneemt met de Servicedienst (zie Service)moet u controleren of het niet een storing betreft die u zelf makkelijk kunt verhelpen met behulp van de volgende lijst. Storingen: Mogelijke oorzaken / Oplossing: De wasautomaat gaat niet aan. De stekker zit niet in het stopcontact of niet ver genoeg om contact te maken. Het hele huis zit zonder stroom. De wascyclus start niet.
Service Voordat u de Servicedienst inschakelt: Controleer eerst of u het probleem zelf kunt oplossen (zie Storingen en oplossingen). Start het programma opnieuw om te controleren of de storing is verholpen; Als dit niet het geval is moet u contact opnemen met de erkende Technische Servicedienst via het telefoonnummer dat op het garantiebewijs staat. NL Wendt u nooit tot een niet erkende installateur. Vermeld: het type storing; het model van de machine (Mod.
Manual de instrucciones LAVADORA Sumario ES Español ES Instalación, 62-63 Desembalaje y nivelación Conexiones hidráulicas y eléctricas Primer ciclo de lavado Datos técnicos Descripción de la lavadora y comienzo de un programa, 64-65 Panel de control Pilotos Poner en marcha un programa Programas, 66 Tabla de programas Personalizaciones, 67 IWD 6103 Seleccionar la temperatura Seleccionar el centrifugado Funciones Detergentes y ropa, 68 Contenedor de detergentes Ciclo de blanqueo Preparar la ropa Pre
Instalación ES Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, verifique que permanezca junto con la lavadora para informar al nuevo propietario sobre el funcionamiento y brindar las correspondientes advertencias. Una cuidadosa nivelación brinda estabilidad a la máquina y evita vibraciones, ruidos y desplazamientos durante el funcionamiento.
Conexión del tubo de descarga 65 - 100 cm Conecte el tubo de descarga, sin plegarlo, a una tubería de descarga o a una descarga de pared colocadas a una altura del piso entre 65 y 100 cm; o apóyelo en el borde de un lavamanos o de una bañera, uniendo la guía suministrada con el aparato, al grifo (ver la figura). El extremo libre del tubo de descarga no debe permanecer sumergido en el agua.
Descripción de la lavadora y comienzo de un programa ES Panel de control Botón COMIENZO RETRASADO Pilotos DE AVANCE DEL CICLO Botón de ENCENDIDO/ APAGADO PANTALLA Botones con pilotos FUNCIÓN Mando de Mando de PROGRAMAS Contenedor de detergentes: para cargar detergentes y aditivos (ver Detergentes y ropa). Botón de ENCENDIDO/APAGADO: para encender y apagar la lavadora. Mando de PROGRAMAS: para elegir los programas. Durante el funcionamiento del programa el mando no se mueve.
Pilotos Los pilotos suministran información importante. He aquí lo que nos dicen: Pilotos fase en curso Una vez seleccionado y puesto en marcha el ciclo de lavado deseado, las luces testigo se encenderán progresivamente para indicar su estado de avance: Piloto puerta bloqueada El piloto encendido indica que la puerta está bloqueada impidiendo su apertura; para poder abrir la puerta es necesario que dicho piloto esté apagado (espere 3 minutos aproximadamente).
Programas Tabla de programas Programas ES Descripción del Programa Carga máx. Detergentes Temp. Velocidad (Kg.) Duración max. máx. del ciclo (°C) (r.p.m.) Prela- Lavado Blanque- Suavi- Normal Eco Time vado ador zante Diario (programas para todos los días) Prelavado Algodón: blancos sumamente sucios. Algodón: blancos sumamente sucios. Algodón (1): blancos y colores resistentes muy sucios. Algodón (2): blancos y colores delicados muy sucios. Algodón: blancos sumamente sucios.
Personalizaciones Seleccionar la temperatura ES Girando el mando de la TEMPERATURA se selecciona la temperatura de lavado (ver la Tabla de programas). La temperatura se puede disminuir hasta el lavado en frío ( ). La máquina impedirá automáticamente seleccionar una temperatura mayor que la máxima prevista para cada programa. Seleccionar el centrifugado Girando el mando de CENTRIFUGADO se selecciona la velocidad de centrifugado del programa seleccionado.
Detergentes y ropa ES Contenedor de detergentes Preparar la ropa El buen resultado del lavado depende también de la correcta dosificación del detergente: si se excede la cantidad, no se lava de manera más eficaz, sino que se contribuye a encostrar las partes internas de la lavadora y a contaminar el medio ambiente. Subdivida la ropa según: - el tipo de tejido / el símbolo en la etiqueta. - los colores: separe las prendas de color y las blancas. Vacíe los bolsillos y controle los botones.
Precauciones y consejos La lavadora fue proyectada y fabricada en conformidad con las normas internacionales de seguridad. Estas advertencias se suministran por razones de seguridad y deben ser leídas atentamente. Seguridad general Este aparato ha sido fabricado para un uso de tipo doméstico exclusivamente.
Mantenimiento y cuidados ES Interrumpir el agua y la corriente eléctrica Limpiar la bomba Cierre el grifo de agua después de cada lavado. De este modo se limita el desgaste de la instalación hidráulica de la lavadora y se elimina el peligro de pérdidas. La lavadora posee una bomba autolimpiante que no necesita mantenimiento. Pero puede suceder que objetos pequeños (monedas, botones) caigan en la precámara que protege la bomba, situada en la parte inferior de la misma.
Anomalías y soluciones Puede suceder que la lavadora no funcione. Antes de llamar al Servicio de Asistencia Técnica (ver Asistencia),controle que no se trate de un problema de fácil solución utilizando la siguiente lista. ES Anomalías: Posibles causas / Solución: La lavadora no se enciende. El enchufe no está introducido en la toma de corriente, o no hace contacto. En la casa no hay corriente. El ciclo de lavado no comienza. La puerta no está correctamente cerrada.
Asistencia Antes de llamar al Servicio de Asistencia Técnica: Verifique si la anomalía la puede resolver Ud. solo (ver Anomalías y soluciones); Vuelva a poner en marcha el programa para controlar si el inconveniente fue resuelto; Si no es así, llame al Servicio de Asistencia técnica autorizado, al número de teléfono indicado en el certificado de garantía. ES No recurra nunca a técnicos no autorizados. Comunique: el tipo de anomalía; el modelo de la máquina (Mod.
Instruções para utilização MÁQUINA DE LAVAR ROUPA Sumário PT Português PT Instalação, 74-75 Desembalar e nivelar Ligações hidráulicas e eléctricas Primeiro ciclo de lavagem Dados técnicos Descrição da máquina de lavar roupa e como iniciar um programa, 76-77 Painel de comandos Indicadores luminosos Iniciar um programa Programas, 78 Tabela dos programas Personalizações, 79 IWD 6103 Seleccione a temperatura Seleccione a centrifugação Funções Detergentes e roupa, 80 Gaveta dos detergentes Ciclo para
Instalação PT É importante guardar este manual para poder consultá-lo a qualquer momento. Se a máquina for vendida, cedida ou transferida, certifique-se que este manual permaneça com a máquina para informar o novo proprietário acerca do seu funcionamento e das respectivas advertências. Um cuidadoso nivelamento dá estabilidade à máquina e evita vibrações, ruídos e deslocamentos durante o funcionamento.
Ligação do tubo de descarga 65 - 100 cm Ligue o tubo de descarga, sem dobrá-lo, a um conduto de descarga ou a uma descarga de parede colocados entre 65 e 100 cm do chão; Não empregue extensões nem fichas múltiplas. PT O cabo não deve ser dobrado nem apertado. O cabo de alimentação deve ser substituído somente por técnicos autorizados. Atenção! O fabricante declina toda a responsabilidade se estas regras não forem respeitadas.
Descrição da máquina de lavar roupa e como iniciar um programa PT Painel de comandos Tecla INÍCIO POSTERIOR Tecla de LIGA/ DESLIGA VISOR Indicadores LUMINOSOS DE AVANÇO DO CICLO Teclas com indicadores luminosos de FUNÇÕES Selector da Selector de PROGRAMAS Gaveta dos detergentes: para colocar detergentes e aditivos (veja Detergentes e roupa). Tecla de LIGA/DESLIGA: para ligar e desligar a máquina de lavar roupa. Selector de PROGRAMAS: para programar os programas.
Indicadores luminosos Os indicadores luminosos fornecem informações importantes.
Programas Tabela dos programas Programas PT Descrição do Programa Velocità Detergentes Temp. max. max. (rotações PréLava(°C) por Lixívia minuto) lavagem gem Carga max. (Kg) Amaciador Nor- Eco mal Time Duração ciclo Quotidiano 1000 1000 1000 1000 1000 1000 800 800 l - l l l l l l l l l l l l l l l l l l l l l l l 6 6 6 6 6 3,25 6 3,25 2,5 2 2,5 2 7 Lã: para lã, cashmere, etc. 8 Seda / Cortinas: para roupas de seda, viscosa, lingerie.
Personalizações Seleccione a temperatura Gire o selector da TEMPERATURA para seleccionar a temperatura de lavagem (veja a Tabela dos programas). A temperatura pode ser diminuída até a lavagem a frio ( ). A máquina impedirá automaticamente a configuração de uma temperatura superior à máxima prevista para cada um dos programas. Seleccione a centrifugação Gire o selector da CENTRIFUGAÇÃO para seleccionar a velocidade de centrifugação do programa seleccionado.
Detergentes e roupa PT Gaveta dos detergentes Preparar a roupa O bom resultado da lavagem depende também do emprego da dose certa de detergente: com excessos não se lava de maneira mais eficaz, mas contribui-se para formar crostas nas peças internas da máquina de lavar roupa e poluir o meio ambiente. Divida a roupa em função: - do tipo de tecido / do símbolo na etiqueta. - das cores: separe as peças coloridas das brancas. Esvazie as algibeiras e verifique se há botões soltos.
Precauções e conselhos Esta máquina de lavar roupa foi projectada e fabricada em conformidade com os regulamentos internacionais de segurança. Estas advertências são fornecidas por razões de segurança e devem ser lidas com atenção. Segurança geral Este aparelho foi projectado exclusivamente para um uso doméstico.
Manutenção e cuidados PT Interromper a alimentação de água e de corrente eléctrica Feche a torneira da água depois de cada lavagem. Desta maneira diminuiu-se o desgaste do sistema hidráulico da máquina de lavar roupa e elimina-se o risco de inundação. Limpar a bomba Esta máquina de lavar roupa é equipada com uma bomba com limpeza automática que não precisa de operações de manutenção.
Anomalias e soluções Pode acontecer que a máquina de lavar roupa não funcione. Antes de telefonar para a Assistência Técnica (veja Assistência), verifique se não se trata de um problema fácil de resolver com ajuda da seguinte lista. PT Anomalias: Possíveis causas / Solução: A máquina de lavar roupa não liga. A ficha não está colocada na tomada eléctrica, ou não o suficiente para haver contacto. Em casa não há corrente. O ciclo de lavagem não inicia.
Assistência 195083782.00 01/2010 - Xerox Fabriano Antes de contactar a Assistência Técnica: Verifique se consegue resolver a anomalia sozinho (veja Anomalias e soluções); Reinicie o programa para verificar se o inconveniente foi resolvido; Em caso negativo, contacte a o Centro de Assistência técnica autorizada no número de telefone indicado no certificado de garantia. PT Nunca recorra a técnicos não autorizados. Comunique: o tipo de anomalia; o modelo da máquina (Mod.