Instructions for use WASHING MACHINE Contents GB English, 1 IT Italiano,13 RO Română,25 GB Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 4 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 5 General safety Disposal Descriptio
Installation GB ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. ! Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Unpacking and levelling Unpacking 1.
Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; alternatively, rest it on the side of a washbasin or bathtub, fastening the duct supplied to the tap (see figure). The free end of the hose should not be underwater.
Care and maintenance GB Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. • Unplug the washing machine when cleaning it and during all maintenance work. 2. unscrew the lid by rotating it anticlockwise (see figure): a little water may trickle out.
Precautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. GB General safety • This appliance was designed for domestic use only.
Description of the washing machine and starting a wash cycle GB Control panel WASH CYCLE PROGRESS DELAY TIMER button DISPLAY ON/OFF button FUNCTION buttons with indicator lights TEMPERATURE Detergent dispenser drawer knob Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”). ON/OFF button: switches the washing machine on and off. WASH CYCLE knob: programmes the wash cycles. During the wash cycle, the knob does not move.
Indicator lights The indicator lights provide important information. This is what they can tell you: Wash cycle phase indicator lights Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress.
Wash cycles 5 Eco Cotton 40° (2): lightly soiled whites and delicate colours. Cycle duration 5 Eco Cotton 60° (1): heavily soiled whites and resistant colours. Total water lt 1200 4 Synthetics (3): lightly soiled resistant colours. 90° 40° 60° 40° Energy consumption kWh Max. speed (rpm) Residual dampness % Max. temp.
Personalisation Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.
Detergents and laundry GB Detergent dispenser drawer Garments requiring special care Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. Silk: use special wash cycle 9 to wash all silk garments. We recommend the use of special detergent which has been designed to wash delicate clothes.
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or is not making contact. • There is no power in the house. The wash cycle does not start. • • • • • The washing machine door is not closed properly.
Service GB Before calling for Assistance: • Check whether you can solve the problem alone (see “Troubleshooting”); • Restart the programme to check whether the problem has been solved; • If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate. ! Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N).
Istruzioni per l’uso LAVABIANCHERIA Sommario I Italiano I Installazione, 14-15 Disimballo e livellamento Collegamenti idraulici ed elettrici Primo ciclo di lavaggio Dati tecnici Manutenzione e cura, 16 Escludere acqua e corrente elettrica Pulire la lavabiancheria Pulire il cassetto dei detersivi Curare oblò e cestello Pulire la pompa Controllare il tubo di alimentazione dell’acqua Precauzioni e consigli, 17 IWSD 71252 Sicurezza generale Smaltimento Descrizione della lavabiancheria e avviare un progra
Installazione I ! È importante conservare questo libretto per poterlo consultare in ogni momento. In caso di vendita, di cessione o di trasloco, assicurarsi che resti insieme alla lavabiancheria per informare il nuovo proprietario sul funzionamento e sui relativi avvertimenti. ! Leggere attentamente le istruzioni: ci sono importanti informazioni sull’installazione, sull’uso e sulla sicurezza.
Collegamento del tubo di scarico 65 - 100 cm Collegare il tubo di scarico, senza piegarlo, a una conduttura di scarico o a uno scarico a muro posti tra 65 e 100 cm da terra; oppure appoggiarlo al bordo di un lavandino o di una vasca, legando la guida in dotazione al rubinetto (vedi figura). L’estremità libera del tubo di scarico non deve rimanere immersa nell’acqua.
Manutenzione e cura I Escludere acqua e corrente elettrica • Chiudere il rubinetto dell’acqua dopo ogni lavaggio. Si limita così l’usura dell’impianto idraulico della lavabiancheria e si elimina il pericolo di perdite. • Staccare la spina della corrente quando si pulisce la lavabiancheria e durante i lavori di manutenzione. Pulire la lavabiancheria La parte esterna e le parti in gomma possono essere puliti con un panno imbevuto di acqua tiepida e sapone. Non usare solventi o abrasivi.
Precauzioni e consigli ! La lavabiancheria è stata progettata e costruita in conformità alle norme internazionali di sicurezza. Queste avvertenze sono fornite per ragioni di sicurezza e devono essere lette attentamente. Sicurezza generale • Questo apparecchio è stato concepito esclusiva- mente per un uso di tipo domestico.
Descrizione della lavabiancheria e avviare un programma I Pannello di controllo Tasto PARTENZA RITARDATA Tasto ON/OFF DISPLAY Manopola AVVIO/ PAUSA OPZIONE Spia TEMPERATURA PROGRAMMI Tasto e spia Tasti e spie Manopola Cassetto dei detersivi SPIE AVANZAMENTO CICLO Manopola OBLÒ BLOCCATO CENTRIFUGA Cassetto dei detersivi: per caricare detersivi e additivi (vedi “Detersivi e biancheria”). Spia OBLÒ BLOCCATO: per capire se l’oblò è apribile (vedi pagina a fianco).
Spie Le spie forniscono informazioni importanti. Ecco che cosa dicono: Spie fase in corso Una volta selezionato e avviato il ciclo di lavaggio desiderato, le spie si accenderanno progressivamente per indicarne lo stato di avanzamento: Spia oblò bloccato La spia accesa indica che l’oblò è bloccato per impedire l’apertura; per aprire l’oblò è necessario che la spia sia spenta (attendere 3 minuti circa).
Programmi 6 7 8 9 10 11 12 13 14 1200 1200 - 20° 20° 20° 1200 1000 800 - 30° 40° 40° 0 800 800 - 30° 30° 30° 600 600 600 - 1200 1000 1000 1200 Durata ciclo 90° 40° 60° 40° 60° 40° Acqua totale lt Giornalieri Cotone con prelavaggio: bianchi estremamente sporchi. Mix colorati: bianchi poco sporchi e colori delicati. Sintetici: colori resistenti molto sporchi. Sintetici (3): colori resistenti poco sporchi.
Personalizzazioni Impostare la temperatura Ruotando la manopola TEMPERATURA si imposta la temperatura di lavaggio (vedi Tabella programmi). La temperatura si può ridurre sino al lavaggio a freddo ( ). La macchina impedirà automaticamente di impostare una temperatura maggiore a quella massima prevista per ogni programma. Impostare la centrifuga Ruotando la manopola CENTRIFUGA si imposta la velocità di centrifuga del programma selezionato.
Detersivi e biancheria I Cassetto dei detersivi Sistema bilanciamento del carico Il buon risultato del lavaggio dipende anche dal corretto dosaggio del detersivo: eccedendo non si lava in modo più efficace e si contribuisce a incrostare le parti interne della lavabiancheria e a inquinare l’ambiente. Prima di ogni centrifuga, per evitare vibrazioni eccessive e per distribuire il carico in modo uniforme, il cestello effettua delle rotazioni ad una velocità leggermente superiore a quella del lavaggio.
Anomalie e rimedi Può accadere che la lavabiancheria non funzioni. Prima di telefonare all’Assistenza (vedi “Assistenza”), controllare che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco. Anomalie: Possibili cause / Soluzione: La lavabiancheria non si accende. • La spina non è inserita nella presa della corrente, o non abbastanza da fare contatto. • In casa non c’è corrente. Il ciclo di lavaggio non inizia. • • • • • L’oblò non è ben chiuso.
Assistenza I Prima di contattare l’Assistenza: • Verificare se l’anomalia può essere risolta da soli (vedi “Anomalie e rimedi”). • Riavviare il programma per controllare se l’inconveniente è stato ovviato; • In caso negativo, contattare il Numero Unico 199.199.199*. ! Non ricorrere mai a tecnici non autorizzati. Comunicare: • il tipo di anomalia; • il modello della macchina (Mod.); • il numero di serie (S/N).
Instrucţiuni de folosire MAŞINĂ DE SPĂLAT RUFE Sumar RO Română RO Instalare, 26-27 Despachetare şi punere la nivel Racorduri hidraulice şi electrice Primul ciclu de spălare Date tehnice Întreţinere şi curăţare, 28 Întreruperea alimentării cu apă şi curent electric Curăţarea maşinii de spălat Curăţarea compartimentului pentru detergent Îngrijirea uşii şi a tamburului Curăţarea pompei Controlarea furtunului de alimentare cu apă Precauţii şi sfaturi, 29 IWSD 71252 Norme de protecţie şi siguranţă genera
Instalare RO ! Este important să păstraţi acest manual pentru a-l putea consulta în orice moment. În caz de vânzare, de cesiune sau de schimbare a locuinţei, acesta trebuie să rămână împreună cu maşina de spălat pentru a informa noul proprietar cu privire la funcţionare şi la respectivele avertismente. ! Citiţi cu atenţie instrucţiunile: veţi găsi informaţii importante cu privire la instalare, la folosire şi la siguranţă. Despachetare şi punere la nivel Despachetare 1.
Conectarea furtunului de golire 65 - 100 cm Conectaţi furtunul de golire - fără a-l îndoi - la canalizare sau la racordul de golire prevăzut pe perete, la o înălţime de 65 100 cm de sol; ! Cablul nu trebuie să fie îndoit sau comprimat. ! Cablul de alimentare trebuie să fie înlocuit doar de tehnicieni autorizaţi ai centrului de service ce apare scris pe certificatul de garantie emis de producator. Atenţie! Producătorul îşi declină orice responsabilitate în cazul în care aceste norme nu se respectă.
Întreţinere şi curăţare RO Întreruperea alimentării cu apă şi curent electric • Închideţi robinetul de apă după fiecare spălare. Se limitează astfel uzura instalaţiei hidraulice a maşinii de spălat şi se elimină pericolul scurgerilor. • Scoateţi stecherul din priza de curent atunci când curăţaţi maşina de spălat şi când se efectuează lucrări de întreţinere. Curăţarea maşinii de spălat 2. deşurubaţi capacul rotindu-l în sens invers acelor de ceasornic (a se vedea figura).
Precauţii şi sfaturi ! Maşina de spălat a fost proiectată şi construită conform normelor internaţionale de protecţie. Aceste avertizări sunt furnizate din motive de siguranţă şi trebuie să fie citite cu atenţie. Norme de protecţie şi siguranţă generale • Acest aparat a fost conceput exclusiv pentru utilizarea în locuinţe unifamiliale.
Descrierea maşinii de spălat şi activarea unui program RO Panoul de control Indicatoare Tastă DESFĂŞURARE CICLU PORNIRE ÎNTÂRZIATĂ Tasta ON/OFF DISPLAY Tastă cu led Taste cu led FUNCŢII Selector Indicator TEMPERATURĂ Sertarul detergenţilor Selector PROGRAME START/ PAUSE UŞĂ BLOCATĂ Selector CENTRIFUGARE Sertarul detergenţilor: pentru a introduce detergenţi sau aditivi (a se vedea “Detergenţi şi rufe albe”).
Indicatoare luminoase Ledurile furnizează informaţii importante. Iată ce indică: Indicatoare de fază După alegerea şi activarea ciclului dorit, indicatoarele luminoase se vor aprinde unul după altul, ceea ce vă indică starea de avansare a programului: Indicator uşă blocată: Aprinderea ledului indică faptul că hubloul s-a blocat, pentru a împiedica deschiderea sa; pentru a putea deschide hubloul, (aşteptaţi aproximativ 3 minute), până la stingerea ledului.
Programe Spãlare Balsam rufe Sarcina Max. (Kg) Umiditate rezidualã % Consum energie kWh Apã totalã lt Durata ciclului de spãlare Prespalare Bumbac: Rufe albe foarte murdare. Colorate Bumbac: Albe puþin murdare ºi colorate delicate. Sintetice: Colorate rezistente foarte murdare. Sintetice (3): Colorate delicate putin murdare. Eco Bumbac La 60°C (1): Albe ºi colorate rezistente foarte mur5 dare. 5 Eco bumbac la 40°C (2): Albe ºi colorate delicate puþin murdare.
Personalizare Reglarea temperaturii RO Rotind selectorul de TEMPERATURĂ se fixează temperatura de spălare (a se vedea Tabelul programelor). Temperatura poate fi redusă până la spălarea la rece ( ). Maşina va împiedica în mod automat de a alege o temperatură mai mare decât maxima admisă pentru fiecare program. Reglarea centrifugării Rotind selectorul de CENTRIFUGARE se stabileşte viteza de stoarcere pentru programul selectat.
Detergenţi şi rufe albe RO Compartimentul pentru detergenţi Articole delicate Un rezultat bun la spălare depinde şi de dozarea corectă a detergentului: excesul de detergent nu garantează o spălare mai eficientă, ci contribuie la deteriorarea părţilor interne ale maşinii de spălat şi la poluarea mediului înconjurător. Mătase: utilizaţi programul special 9 pentru spălarea articolelor din mătase. Se recomandă folosirea unui detergent special pentru articole delicate.
Anomalii şi remedii Se poate întâmpla ca maşina de spălat să nu funcţioneze. Înainte de a apela serviciul de Service (a se vedea “Asistenţă”), verificaţi dacă nu este vorba de o problemă uşor de rezolvat: RO Anomalii: Cauze posibile / Rezolvare: Maşina de spălat nu porneşte. • Stecherul nu este introdus în priza de curent, sau nu face contact. • Aveţi o pană de curent la domiciliu. Ciclul de spălare nu porneşte. • • • • • Uşa nu este bine închisă. Tasta ON/OFF nu a fost apăsată.
Asistenţă 195133125.00 03/2015 - Xerox Fabriano RO Înainte de a lua legătura cu Service-ul: • Verificaţi dacă puteţi rezolva singuri problema (a se vedea “Anomalii şi remedii”); • Porniţi din nou programul pentru a controla dacă inconvenientul a fost eliminat; • În caz negativ, luaţi legătura cu asistenţa tehnică autorizată la numărul telefonic indicat pe certificatul de garanţie. ! Nu apelaţi niciodată la persoane neautorizate. Comunicaţi: • tipul de anomalie; • modelul maşinii (Mod.